Get complete information related to latest Tubular Pole Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tubular Pole Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tubular Pole Tenders.
Tender For repair/ replacement of lt cable, lt panel and connected items in domestic area (excluding camp area), su site 1a and 1b at af stn jodhpur - excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified and directed., returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil.complete all as specified and directed., removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in any type of soils.complete all as specified and directed., m&l for sand cushioning for xlpe cable with tibba sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punning down to 180mm to provide a required cover complete all as specified and directed by the engineer-in-charge.note:- punned thickness only shall be measured and paid., m&l for protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class b bricks complete all as specified and directed by engr-in-charge., supplying and laying un-reinforced precast concrete cable cover, class lv, type i, flat, size 250mm x 150mm x 40mm confirming to is - 5820 complete all as specified and as directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable, laid in ground with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm, 3.5 core complete all as specified and directed., taking down of lt cable any size from trech/ gi pipe/ walls/ on ground/ street light poles complete all as specified and directed., m&l for boring of holes under road, pavement, hard stansding by using manual method with 100mm hdpe pipe complete all as specified and directed by engineer-in-charge., s&f in repair mccb 400 amp, 4 pole, 415 v, 36 ka, thermal megnatic adjustable type complete all as specified and directed., s&f in repair mccb 250 amp, 4 pole, 415 v, 35 ka, thermal megnatic adjustab
Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubularpole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get
Tender For tender for comprehensive construction of adss optical fiber cable, including supply and installation of related adss optical fiber cable accessories, supply and erection of 7m/8m tubularpoles along with associated accessories, slinging of adss cable, testing and commissioning
Tender For supply of 12 core adss optical fiber cable , 7 mtrs gi tubularpoles for overhead , 9 mtrs gi tubularpoles for overhead , tension assembly set , suspension assembly set , demountable pulley , adjustable cable storage bracket , ofc joint enclosure , erection of gi tubularpoles alonwith fixation of accessories , laying of 12f adss cable overhead on the poles , patch cord , pigtail , otdr , splicing machine , optical power meter , multiplexer stm 1 mux with 120 km sfp module , laying of gi pipe 2 inch 50 mm diameter , fiber termination box , row charges
Tender For supply of combined 5 pin 15 amp , bell switch 5 amp , pvc switch and socket combine with board 15 by 16 amp , pvc switch and socket combine with board 5 by 6 amp , distilled water , combination plier , cutting plier , screw driver set , ceiling led light , 2 pole mcb 10 ampcomma 220 volt , 2 pole mcb 16 ampcomma 220 volt , 2 pole mcb 32 ampcomma 220 volt , 2 pole mcb 64 ampcomma 220 volt , 0point5 hp water pump , car air pressure pump , 16 amp switch , 16 amp socket , mcb 2 pole 20 amp , 4 into 7 pvc board gangbox , 12 into 12 pvc board gangbox , 4 into 4 pvc board gangbox , 6 amp socket , main switch 63 amp , cable 2 core roll of 91 mtr 6 sqmm aluminium , change over switch 400 amp 3 phase 4 pole , 200 amp cut off fuse , 200 amp 3 pole mcb , mcb 63 ampcomma 220 volt , cable 2 core roll of 91 mtr 10 sqmm aluminium , main switch 100 amp , xlpe three core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , cable 2 core roll of 91 mtr 16 sqmm aluminium , earthing set meter tester , earthing wire single core 1point5 sq mm , line tester , bulb holder , red indicator light for electric board , cable 2 core roll of 91 mtr 2point5 sqmm , kit kat fuse box 3 pole , xlpe two core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe four core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 16 sq mm aluminium unarmoured power cable 1point1 kv , 100 amp 415 volt busbar chamber board with 100a four pole isolator protection , mccb 415 volt 3 phase 100 amp , mcb box 8 way , gi tubularpole 100 mm dia length 5 mtr thickness 4 mm with baseplate 250mm x 250mm as per is 2713 part 1 and part 3 , aluminium lug 50 mm , aluminium lug 10 mm , aluminium lug 25 mm , gi nut and bolt size m 10 length 50 mm full thread , charcoal , salt , earthing plate 2 feet into 2 feet into 8 mm , gi wire 6 mm , winding wire , cable tie lock belt 6 feet feet , main switch box 4 pole 3 phase 200 amp , exhaust fan 9 feet feet 30 watt , screw size 1 feet feet , bed switch size 6 amp 220 volt , batton holder 06 amp 220 volt , pendant holder 06 amp 220 volt , lighting conductor rod , hydrometer for specific gravity , drill machine set battery , change over switch 32 amp single phase 2 pole , kit kat fuse switch gears , extension board of 02 capacity , ampere meter , double core wire 8 sq mm , double core wire 16 sq mm , double core wire 25 sq mm , digital clamp meter , dc test lamp automatic circuit tester , multistrand electrical wire 2 sq mm pvc single core , tulu pump 1 to 1 point 5 hp , pvc gang box 4 into 2 , pvc gang box 2 into 2 5 pin socket 5 amp, switch 5 amp, 3 pin plug 15 amp, 3 pin plug 05 amp, modular switch board (4 switch, 1 socket), modular switch board (6 switch, 1 socket), modular switch board (8 switch, 2 socket), 1 switch + 1 socket smart switch board , 4 switch + 1 socket smart switch board , 6 switch + 2 socket smart switch board , 8 switch + 2 socket smart switch board , cable four core 10 sq mm , cable 2 core roll of 91 mtr 10 sqmm, cable 2 core roll of 91 mtr 6 sqmm , multistrand electrical wire 6.0 sq mm pvc single core, multistrand electrical wire 4.0 sq mm pvc single core, multistrand electrical wire 2.5 sq mm pvc single core, multistrand electrical wire 1.5 sq mm pvc single core, multistrand electrical wire 1.0 sq mm pvc single core, multistrand electrical wire 0.75 sq mm pvc single core, casing and caping 20 mm (length of 3 mtr), casing and caping 25 mm (length of 3 mtr), led bulb 20/24 watt, //bid details 2 / 94
Tender For bid to ras supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)
Tender For corrigendum : s/e of tubularpole overall length 9 mtr height with 70 watt led on amloh road from light chownk to canal (bridge) m.g.g 52 (2) l
Tender For corrigendum : provide & fixing of of new light g.i. pole 6.1 mtr long with 90 watt led light from amloh road canal to turan road ( both side) m.c. gobindgarh 52 (2) l
Tender For corrigendum : provide & fixing of of new street light g.i. pole with led in amloh road bhodey milll street, gobindgarh club road street of surbi gas and sharma cement in m.c. gobindgarh
Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh