Latest tubular section Tenders | Government tubular section Tenders

CTN :45143992

21 May, 2026 1.66 Lacs

Murshidabad - West Bengal

Tender For corrigendum : procurement supply of flood fighting materials as well as exectn during monsoon 2026 from jhulanpur paschimpara to jhulanpur boro masjid area of titidanga jurankandi ebmkt on the left bank of river bramhani in ps blk nabagram dist msd 3rd call - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete(capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or gates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028 cum/ bag, extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts, cutting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge., supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete., labour charges for dumping and placing in position properly filled in nylon crates with filled in gunny / poly cement bags (minimum 25 nos. having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the engineer in charge.nb:- volume of each earth/ sand filled bags should not be less than0.028 m3. size of nylon crate is 1metre x 1metre x 1metre.(a) where boats are not necessary., supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (dia. to be measured at mid length)., driving bamboo pins in standing or flowing water including scaffolding and driving appliances. i) where boats are not necessary., supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.)

Central Government/Public Sector

CTN :45183043

27 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of model name: s-type steel chair with teakwood arm, 2. bush included: yes, 3. chair type: non-revolving and non-tilting chair with armrest, 4. chair understructure type: cantilever, 5. understructure material: mild steel, 6. the shape of tubular section of understructure: round, 7. section size (diameter/sides) of understructure:25 mm, 8. understructure wall thickness :2 mm, 9. seat material: caned, 10. minimumseat height from floor surface: >400 mm and <=500 mm, 11. width of seat :>400 mm and <=450 mm, 12. depth of seat :>400 mm and <=450 mm, 13. seat upholstery material: caned, 14. backrest base frame material: mild steel frame, 15. backrest material: caned, 16. width of backrest :>450 mm, 17. backrest height from the seat level :>=350 mm and <=450 mm, 18. backrest upholstery material: caned, 19. armrest type: continuous armrest, 20. armrest movement: fixed, 21. warranty period in number of years: 01 year, 22. description: [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45196846

04 Jun, 2026 NA

Katipala - Karnataka

Tender For providing of custom bid for services - mrpl tender no 3420000130 item code 1025400 dc 33301 catalyst change over jobs as per tender document and as per boq bidder has to quote lumsum including gst,custom bid for services - item code 1025401 hourly rate for carrying out additional jobs as per tender document and as per boq bidder has to quote lumsum amount for 497 hours including gst,custom bid for services - item code 1044312 scaffolding erection & removal outside the reactor related to inspection jobs as per tender document and as per boq bidder has to quote lumsum amount for 5250 m3 including gst,custom bid for services - item code 1044314 buffing/ sandering outside reactor, around the nozzles for inspection as per tender document and as per boq bidder has to quote lumsum amount for 100 m2 including gst,custom bid for services - item code 1044316 cut and reweld insulation supports provided on the reactor shell as per tender document and as per boq bidder has to quote lumsum amount for 2000 id including gst

Central Government/Public Sector

CTN :43070262

14 May, 2026 45.01 Lacs

Mumbai - Maharashtra

Tender For bid to ras repair, maintenance, and installation of plant/ systems/equipments (version 2); contract for network arc of trombay unit- 1 12 core single mode outdoor fibre optic cable of 9/125 micron specification, make:, link/ digilink/ molex/ tyco /amp/ systimax/ r&m/ panduit/ rit or equivalent, mtr 3000, 2 24 core single mode outdoor fibre optic cable of 9/125 micron specification, make:, link/ digilink/ molex/ tyco /amp/ systimax/ r&m/ panduit/ rit or equivalent, no 2000, 3 lc-sc single mode 9/125 duplex fibre patch cord of minimum 2 meter length, make:, dlink/ digilink/molex/tyco/amp/systimax/r&m/panduit or equivalent, no 50, 4 utp cat 5e cable ( 300 meter box), make: dlink/ digilink/ tyco/ amp/ systimax/, r&m/panduit/rit or equivalent, no 70, 5 modular type cat 5e wall mount information outlet with one rj 45 port and box,, make: dlink/digilink/tyco/ amp/systimax/ r&m/ panduit /rit or equivalent, no 1000, 6 cat 5e rj 45 jacks (1 box of 100 nos. connectors), make: dlink/digilink /molex/tyco, /amp/ systimax/ r&m/ panduit/rit or equivalent, no 50, 7 utp cat 6 cable ( 300 meter box), make: dlink/digilink /molex/tyco /amp /systimax/, r&m/panduit/rit or equivalent, no 20, 8 1 inch pvc casing caping 1 conduit, t -joint accessories, couplers etc. for fixing, isi, make, mtr 1000, 9 6 u wall mount rack with fans & power adapter strip, front & both side door, openings, make: valrack/netrack/srlink or equivalent, no 10, 10 9 u wall mount rack with fans & power adapter strip, front & both side door, openings, make: valrack/netrack/srlink or equivalent, no 10, 11 outdoor water proof underground enclosure box for ofc splicing of 24 core splicing,, make: raycaum / mx or equivalent, no 100, 12 wifi extender repeater signal booster, 300mbps make: dlink or equivalent no 20, sr item description in supply uom estimated, qty, 13 underground digging 2 feet deep in soft soil, backfilling for restoration to original, state, mtr 4000, 14 underground digging 2 feet deep in hard soil, & backfilling for restoration to original, state, mtr 1000, 15 underground digging 2 feet deep in tar road & backfilling for restoration to original, state, mtr 500, 16 underground digging 2 feet deep in concrete & backfilling for restoration to original, state, mtr 500, 17 pulling of fo cables inside duct and laying in underground trench mtr 5000, 18 pulling of fo cables inside casing caping / conduits and saddling inside building mtr 3000, 19 pulling of utp cables inside duct and laying in underground trench mtr 2000, 20 pulling of utp cables inside casing caping / conduits and saddling inside building mtr 15000, 21 pulling of fo cables / utp cables inside duct and laying on existing cable tray of 15, feet hight from ground using scaffolding / articulate booms, mtr 3000, 22 termination of utp cat 5/6 cable in rj45 information outlet (i/o) / jacks, fixing of i/o, box on wall, no 2000, 23 otdr testing for fo cable core no 1000, 24 splicing of sm / mm fo cable cores in liu / enclosure box & dressing no 5000, 25 installation / mounting of 6u / 9u rack on wall no 25, 26 one no onsite manpower qtr 12.

CTN :44959095

14 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of backlit signages , stainless steel name plate , decorative white board , steel work built up section , steel work tubular section , concertina coil , steel wire fabric , polycarbonate sheet , retro-vinyl signage board

Central Government/Public Sector

CTN :44958506

19 May, 2026 NA

Jolarpettai Junction - Tamil Nadu

Tender For emergency ohe mast (temporary mast) for conventional ohe suitable for used either on sleepers as per rdso drawing no.eti/c/0072 except for base plate. the base plate design should be suitable to be used with 32mm dia spikes directly on the ground as detailed in drawing no.m/trd/sk/801 as well to be used with sleeper. both rdso drawing for the mast and drawing for modified base plate are enclosed. the base plate of the bottom piece of the emergency mast should be of the same size as detailed in the base plate of drawing no.m/trd/sk/801. tubular steel section of adequate thickness suitable for 20 mm dia through bolt should be provided by welding on one side in the base plate of the bottom piece of the emergency mast. two numbers of tubular steel sections of the same size as in the base plate of mast should be provided in the top piece of the modified base plate. this should facilitate erection of emergency mast quickly and easily by placing the mast on modified base plate by inserting and aligning a long bolt on these 3 welded tubular sections. photograph of the arrangement is also enclosed for reference. further, scope of supplyincludes supply of 8+4=12 nos. of spikes as detailed in the base plate drawing described above and 1 no ofthrough bolt of size m20x550. top corner plates a1,b1,c1 and d1 should be firmly welded with bottom sideof c channels marked as a, b, c & d in the drawing. it shall be noted that 4 nos. of bottom corner plates marked as a-1, b-1, c-1 and d-1 of size exactly same as that of a1,b1,c1 and d1 with 20 mm dia holes at the corners is included in the scope of supply, which should be supplied as separate pieces. two holes suitable for providing 16 mm bolt should be made on opposite faces of the bottom piece of mast at approximately 450 mm height from the base plate. finished product should be given one coat of primer on which one coatof suitable anticorrosive painting should be given. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44883503

24 Apr, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For supply of item 10_ m6200007111_ scaffold brd, st, 3000x250x75mm , item 20- m4726606013- right angle coupler, 40x40, scaffolding , item 30- m4726606011- swivel coupler, 40x40 mm

Central Government/Public Sector

CTN :44901644

29 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of model name: s-type steel chair with teakwood arm, 2. bush included: yes, 3. chair type: non-revolving and non-tilting chair with armrest, 4. chair understructure type: cantilever, 5. understructure material: mild steel, 6. the shape of tubular section of understructure: round, 7. section size (diameter/sides) of understructure:25 mm, 8. understructure wall thickness :2 mm, 9. seat material: caned, 10. minimumseat height from floor surface: >400 mm and <=500 mm, 11. width of seat :>400 mm and <=450 mm, 12. depth of seat :>400 mm and <=450 mm, 13. seat upholstery material: caned, 14. backrest base frame material: mild steel frame, 15. backrest material: caned, 16. width of backrest :>450 mm, 17. backrest height from the seat level :>=350 mm and <=450 mm, 18. backrest upholstery material: caned, 19. armrest type: continuous armrest, 20. armrest movement: fixed, 21. warranty period in number of years: 01 year, 22. description: [ warranty period: 12 months after the date of delivery ]