Latest tubular truss Tenders | Government tubular truss Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

State Government

CTN :45730100

04 Jul, 2026 NA

Koradi - Maharashtra

Tender For procurement of spares for wagon tippler weighbridges & belt weighers installed at chp 3x660mw, ktps, koradi. - chpelect load cell for 30 mt cap, load cell capacity 45 mt, canister type, bw 1250 tph load cell, bw 1250 tph remote indicator, bw 1250 tph speed sensor assy, weigh bridge frame turn buckle, hylum pads for load cell of 50mt road wb, load cell mount with strut,button,plug, reputed 100 mt top cup for load cell etc..

CTN :45388647

06 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of strut of h05 system-01 with part no 111009099213

Central Government/Public Sector

CTN :45492753

18 Jul, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of 1 angle plate , 2 angle plate , 3 clamp , 4 gasket , 5 flange , 6 bracket , 7 bracket , 8 bracket , 9 panel , 10 spacer , 11 spacer , 12 spacer , 13 spacer , 14 cover plate , 15 base , 16 base , 17 flange , 18 support , 19 web , 20 frame , 21 lock , 22 body , 23 holder with nib , 24 bracket , 25 beam , 26 string , 27 beam , 28 bracket , 29 bracket , 30 string , 31 beam , 32 beam , 33 string , 34 string , 35 beam , 36 stiffener , 37 stiffener , 38 lock , 39 frame , 40 bracket , 41 stopper , 42 plate , 43 insert , 44 stiffner , 45 gasket , 46 bracket , 47 stiffner , 48 rear guide , 49 front guide , 50 rear sprocket , 51 bracket , 52 bracket , 53 bracket , 54 lh wall , 55 wall rh , 56 bracket , 57 bracket , 58 bracket , 59 base , 60 bracket , 61 base , 62 base , 63 base , 64 bracket , 65 packing , 66 base , 67 front bracket , 68 rear bracket , 69 spacer , 70 carrier , 71 plate with thread , 72 insert , 73 insert , 74 insert , 75 insert , 76 cover , 77 locator 35khgsl , 78 plate , 79 plate , 80 plate , 81 stoper , 82 block , 83 block , 84 block , 85 angle , 86 angle , 87 upper internal longeron , 88 upper internal longeron , 89 doulber , 90 e10-0628- i821-001 , 91 e10-0628-i821-002 , 92 rear washer , 93 rear washer , 94 hinge , 95 cover plate , 96 cover plate , 97 plate , 98 strut , 99 strut , 100 strut , 101 profile , 102 profile , 103 support base plate , 104 plate , 105 bracket , 106 bracket , 107 cover plate , 108 bracket , 109 bracket , 110 bracket , 111 base plate , 112 filler plate , 113 reinforcement plate for bottom pane , 114 fairing rear block , 115 panel , 116 panel , 117 string , 118 bracket throttle assembly , 119 bracket throttle assembly , 120 shell , 121 fitting , 122 fitting , 123 body , 124 hatch cover , 125 hatch cover , 126 profile , 127 profile , 128 profile , 129 profile , 130 bottom rh , 131 bottom rh , 132 fairing front block

Central Government/Public Sector

CTN :45703049

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - pressure foot guide am (18341/28), throat plate screw (23473/28), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/18), looper screw (6789/18), looper nut (6790/18), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/18), needle tension spring (2710/b), screw special (16791/18), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), looper oscillating block screw (3010/e), looper clamp assly (20792/38), looper drive link (3010/0), looper drive link taper pin (3010/ca), nibbler knife (11025/38), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog am bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog am pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/38), looper (3010/j), needle (30), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/18), fibre disc retaining screw (2714/j), thread eyelet (196), feed dog arm shaft nut (2710/an)

CTN :45712927

07 Jul, 2026 NA

Bathinda - Punjab

Tender For supply of field coil assy of tata , drive assy , brush carries assy of tmb , shock absorber assy strut assy of stln , bellow kit of tata safari , 4x4 electronic shifter motor of tata safari , clutch disc of stln , regulator assy rh of stln of stln , cable assy of t-815 , bearing tappered roller of tlr , insul bush of tmb

CTN :45279840

01 Jul, 2026 NA

Bathinda - Punjab

Tender For bid to ras supply of spring brake chamber , pole isolator switch , shock absorber assy strut assy , element oil filter , front direction indicator , head light bulb 55 60w , ring spanner 16 x 17 metric , relay solenoid eng starter electricals

CTN :45451524

01 Jul, 2026 2.99 Lacs

Jalandhar - Punjab

Tender For bid to ras corrigendum : supply of hose 3 oblique 8 inch x bsp x 1000 long str str , hose 3 oblique 8 inch x bsp x 800 , pivot pin alloy steel , side cutter rh , side cutter lh , bolt plough 3 oblique 4 inch unfx 2x 3 oblique 4 inch , bs 311 type 9 , nut gr i 3 oblique 4 inch unf , screw gr 5 3 oblique 4 unf , hyd cap , filter cap , slopper , stainer , rear view mirror , hinge pin , screw x 2 inch long , gas strut , lock handle with key , locking handle lh , locking handle rh , bush , shim , spacer , wiper motor , working light , oil pressure switch , horn 12v , fuse , ignision key , panel horness , universal joint , hose 1 oblique 2 inch x 1 oblique 2 inch bsp x 470 long , hose 1 oblique 4 inch x 1 obique 4 bsp x 1100 long , seal 1 oblique 4 inch bsp , element , kit spider , hose , mud filter element , mud filter , fuel pipe

CTN :45712952

08 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of 110 e spare parts c c - jcb 3dx super door strut , jcb 3dx door lock lh and rh , jcb 3dx side wind door lock , jcb 3dx fan , jcb 3dx break light , jcb 3dx head light , jcb 3dx horn 12 v , jcb 3dx joystick hand grip , jcb 3dx ignition key , jcb 3dx rotary solenoid , jcb 3dx pre cleaner hub , jcb 3dx fuel tank cap with key , jcb 3dx wiper assey , jcb 3dx air filter , jcb 3dx thermostat valve , jcb 3dx fuel line , jcb 3dx fuel line plastick , jcb 3dx steering , jcb 3dx accelator cable , ex 70 head light assey , ex 70 wiper assy , ex 70 stopper cable , ex 70 fuse 5 amp and 10 amp , ex 70 relay , ex 70 fuel tank cap , ex 70 accelerator cable , ex 70 tooth locking cable , ex 70 pre cleaner , ex 70 starting cable , ex 70 fan belt , ex 70 air filter , ex 70 thermostat valve , battery terminal , grease nipple , fuse micro , fuse 10 amp 15 amp 20 amp , insulation tape , tyre liver , puncture kit , pressure gauge , air line , bd 80 dozer reverse alarm , bd 80 dozer head light asy , bd 80 dozer ignition key , bd 80 dozer rest arm , bd 80 dozer stoper cable , bd 80 dozer lever hand knob , bd 80 dozer horn 24 v , bd 80 dozer fan belt , bd 80 dozer realy 24 v , bd 80 dozer head gas ket , bd 80 dozer oil filter , bd 80 dozer fuel filter , bd 80 dozer 4 st realy 24 v , bd 80 dozer baby filter , bd 80 dozer water separator , bd 80 dozer 19 mm nut bolt , bd 50 dozer fan , bd 50 dozer head light asy , bd 50 dozer reverse alarm , bd 50 dozer lever joint , bd 50 dozer fan switch , bd 50 dozer fuel filter primary and secondary , bd 50 dozer oil filter , skid steer loader head light , skid steer loader fan , skid steer loader ignition key , skid steer loader horn , skid steer loader side indicator * /bid number : gem/2026/b/7717712 + /dated: 27-06-2026 ' ' / bid document 1 / 44

CTN :44971345

01 Jul, 2026 2.18 Crore

Nagpur - Maharashtra

Tender For bid to ras supply of aluminium armoured cable , gi perforated cable trays 100 mm wide x 50 mm depth x 1point 6 mm thickness , raceway 150 mm wide x 50 mm depth x 1 point 6 mm thickness , switch socket 6 modular box 16 amp switch socket 6 amp , providing and laying cat 6 6 pair cable with accessories , supply and fixing of 4 way tpn horizontal db box with accessories , supply and fixing of 63 amp isolator , supply and fixing of 63 amp rccb , supply and fixing of 16 amp mcb , supply and fixing of 40 amp rccb , supply and fixing of 100 amp isolator , supply and fixing of 100 amp rccb , scaffolding , sitc of ups 20 kva with isolation transformer , sitc of 2x2 clean room luminaries , dismantling aluminium gypsum partitions doors windows fixed , dismantling tile work in floors and roofs 10 25 mm thick , cement concrete flooring 124 mix 40 mm thick , modular walls with 60 mm thick puf panels , modular ceiling with 60 mm thick puf panels , epoxy flooring 5 mm thick , aac block masonry 150 230 300 mm thick , 12 mm cement plaster 1 4 mix , vitrified tile 600x600 mm , pvc flooring , plaster of paris putty 2 mm thick , wall painting with acrylic emulsion , granite stone slab for platforms , extra for granite facia drops , extra for openings in granite for sinks , reinforced cement concrete work , centering and shuttering for shelves , steel reinforcement for rcc , stainless steel kitchen sink 610x510 mm , cp brass waste coupling 32 mm , coat hook with bracket , 600 mm long towel rail , cp brass angular stop cock , cp brass bottle trap 32 mm , upvc connection pipe with brass unions , c p sink cock with regular swinging spout table mounted model , c p brass extension nipple 15mmx50mm , stainless steel cabinets under counter and overhead , storage cabinets under counter and overhead , hermetically sealed swing door 900mm w x 2100mm , hermetically sealed swing door 1500mm w x 2100mm h , flush door shutters isi marked non decorative 35mm thick , extra for lipping with teak wood battens 25mm minimum depth , extra for vision panel not exceeding 0 point1 sqm rectangular or square , laminated sheet , h type stainless steel pull handle 304 grade 25x600mm , aluminium extruded section body tubular type universal hydraulic door closer , pair design lever handle on roses and escutcheons with mortise sash lock , dgu glass 1200mm x 1400mm , pass box 580 x 650 x 700 mm id 1 , pass box 230 x 230 x 295 mm id 1 , aluminium work for fixed portions polyester powder coated 50 micron , aluminium shutters for doors windows , glazing in aluminium frames 5mm float glass , pre laminated particle board for panelling 12mm thick , removal and refixing mineral fibre false ceiling tiles 595x595mm , cpvc pipes 15mm nominal dia hot cold water , cpvc pipes 20mm nominal dia hot and cold water , cutting holes in rcc floors roofs up to 15x15cm for drain pipes , trap self cleansing 100mm inlet outlet sand cast iron s and s , trap self cleansing 100mm inlet 75mm outlet sand cast iron s and s , glazed stoneware pipes class sp 1 100mm 1 is1 cement mortar , demolishing cement concrete 136 or richer , cement concrete work up to plinth level 124 mix , square mouth sw gully trap class sp 1 100x100mm p type , corner coving , steel work in built up tubular trusses hot finished welded tubes , eye and face wash station floor mounted dx type double skinned ahu, air cooled outdoor vrf units, ahu connection kit, hepa filter plenum laminar air flow system, gi ducting for tb lab, indoor ducting thermal insulation, exposed ducting thermal insulation, acoustic insulation for ducting, ahu control unit //bid details 2 / 94

Tubular Truss Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector