Latest tungsten carbide insert Tenders | Government tungsten carbide insert Tenders

Central Government/Public Sector

CTN :45283137

29 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For tungsten carbide insert tip cnmg 120408 mt tt8125 make: taegutec, widia, kennametal, iscar, sandvik, note: sample to be approved before bulk supply.. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45077845

03 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 25/10t and dsl including spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v and any other accessory treated as concomitant accessory (as per attached leading parameters and detailed technical specifications specified in schedule-i and section-v conforming to specification no. cofmow/ir/eotc-2022, rev-0 or latest). [ warranty period: 24 months after the date of delivery ]

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

CTN :45282504

12 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of hand operated heavy duty light weight hydraulic cable crimping tools with pressure indicator and hexagonal type dies having following technical requirements. 1) compact design tool with a two stage setting high and low pressure for quick off output. 2) compression force 16 metric ton. 3) maximum stroke -32 mm. 4) operating pressure 10000 psi/700/kgs. 5) flip to head. 6) made from alloy steel (en-19) 7)capacity - 25mm to 400mm 8) dies-h-25 to h400 ( 11 set) 9) weight-15kg (app) [ warranty period: 30 months after the date of delivery ] ]

CTN :45298380

05 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of tungsten carbide inserts iso design snmm 190616 iso grade p-30 coated. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :44914331

28 May, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of switchgear panels as per technical specifications , supply of switchgear spares as per technical specifications , supply of special tools and tackles as per technical specifications , decommissioning and installation & commissioning of switchgear panels , testing (lightning impulse test, seismic withstand test and iv & v test) as per technical specs , training for 2 engineers, 2 supervisors & 8 technician at vendor premises

Central Government/Public Sector

CTN :45058179

25 May, 2026 1

Bangalore - Karnataka

Tender For bid to ras tender for supply of tungsten carbide insert 49870106811 sn02 , tungsten carbide insert 49870106811 sn05 , tungsten carbide insert 49870106811 sn06 , tungsten carbide insert 49870106811 sn07 , tungsten carbide insert 49870106811 sn08 , tungsten carbide insert 49870106811 sn09 , tungsten carbide insert 49870106811 sn10 , tungsten carbide insert 49870106811 sn11 , tungsten carbide insert 49870106811 sn12 , tungsten carbide insert 49870106811 sn13 , tungsten carbide insert 49870106811 sn14 , tungsten carbide insert 49870106811 sn15 , tungsten carbide insert 49870106811 sn16

State Government

CTN :45293862

29 May, 2026 1.07 Lacs

Junagadh - Gujarat

Tender For parches of safety tools and tackles for division all technical staff. (e-tender) mangrol div. 107440

Tungsten Carbide Insert Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors