Latest turbine rotor Tenders | Government turbine rotor Tenders

Central Government / Public Sector

CTN :45706539

11 Jul, 2026 NA

Vadodara - Gujarat

Tender For supply of atlas copco make spares -rotor assembly,u/n:1314162633,gt063l1l1,atlascopco (india) pvt ltd , high speed bearingset,u/n:1314162613,gto63l1l1,atlas copco (india)pvtltd

Central Government / Public Sector

CTN :45716444

06 Jul, 2026 NA

Mathura - Uttar Pradesh

Tender For procurement of ppa dosing pump spares (tushaco) - rotor set,p/n-1, grafoil packing,p/n-8.1, gasket set,p/n-24, pin dowel,p/n-12, bush bearing,p/n-9, front cover,p/n-18, ball bearing housing,p/n-5, casing,p/n-11, pump with gear box

Central Government/Public Sector

CTN :45570025

03 Jul, 2026 NA

Angul - Odisha

Tender For corrigendum : job contract for abb make lp turbine rotor high speed balancing with l 0blade replacement and rca of failed blades at ntpc talcher kaniha

Central Government/Public Sector

CTN :45733590

10 Jul, 2026 88.06 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair of 12 mw gas expansion turbine rotor.

CTN :45719844

20 Jul, 2026 25.04 Lacs

Murshidabad - West Bengal

Tender For procurement of spares for booster pump for sgtpp - procurement of procurement of spares for booster pump for sgtpp., rotor assy. booster pump-fa1b75 for mdbfp of 500 mw , (balanced condition), set contain one shaft, one impeller, impeller neck ring-02 nos, thrust collar, coupling key, pump drg. no- ( drg. no-hy-dg-373-139-a017 moc-shaft-bs-en-10250-4, impeller-bs-en-10213-2, impeller wear ring-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. approximate shaft length-1725 mm, shaft run-out should be within 0.05 mm. for mdbfp , direction of rotation-anti clowise viewed from non-drive end. rotor assembly should be in balanced condition. balancing document should be submitted during delivery. all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller for booster pump-fa1b75, for booster pump of 500 mw. , part no-2 , pump drg. no-hy-dg-373-139-a017, moc- bs en 10213-2 ( in balanced condition. balancing document should be submitted during delivery. moc-impeller-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. all give dimensions are approximate & actual dimensions must be at per given drawing no. ), shaft for booster pump-fa1b75 for booster pump of 500 mw. , part no-5 , pump drg. no-hy-dg-373-139-a017, moc-bs en 10250-4 or equivalent ( shaft run-out should be within 0.05 mm. moc-shaft-bs-en-10250-4, approximate shaft length-1725 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller nut, booster pump-fa1b75 for booster pump of 500 mw , part no-13, pump drg. no-hy-dg-373-139-a017, nut thrust collar for booster pump-fa1b75 , pump drg. no-hy-dg-373-139-a017, casing wearing ring, f-m/cd-bp-fa1b75 for booster pump ( moc-fv 520 b (13% cr. steel). approximate dimension od-340 mm, id-320 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), wearing ring,impeller,fa1b75 for booster pump fa1b75 ( moc-bs-en-10213-2, approximate dimension od-320 mm, id-300.20 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. )

CTN :45732495

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of high flow pump spares spares for high flow progressive cavity pumps , , model no:- rbh - 8180 aabn (pump size :- 8" x 8") for a.h pump , model no:- pslh 8170 aabn pump sizes:- 8" x 8" (for sugar melter) , model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h,(cl molasses pumps 02 nos) , model no:- pslh 6160 pump sizes:- 6" x 6" (for a.l. & f.m molasses pumps) , model no:- pslh 4150 pump sizes:- 4" x 4" (for (c 1) molasses , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , spares for high flow progressive cavity pump make:-risansi industries ltd. model no. :- rbh 8180 aabn pump sizes :- 8" x 8" (for a.h pumps of centrifugal station) , s.s rotor , shaft head , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , rubber boot , protector , circlip , spares for high flow progressive cavity pump make:-risansi industries ltd. model no :- rboh ag 6160 pump sizes :- 8" x 8" (for sugar melter , b.h & c.l. pumps) , s.s rotor , sleeve ring , pin , head pin , rubber boot , s.s sleeve , shaft head , circlip , protector , connecting rod , seal ring , bush , spares for high flow progressive cavity pump (pslh 6160) make:- risansi industries ltd. pump sizes :- 6" x 6" (for a.l. & f.m molasses pumps) , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , protector , circlip , sleeve ring , shaft head , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- pslh 4150 aabn pump sizes :- 4" x 4" for (c1) molasses , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , shaft head , sleeve ring , bush , connecting rod , circlip , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , s.s sleeve , seal ring , spares for high flow progressive cavity pump make:- risansi industries ltd. model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h, (c.l molasses pumps 02 nos) , s.s rotor , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , bush , rubber boot , protector , circlip , spares for high flow progressive cavity pump model:- aip 4050 s make:- akanshi industries pump sizes :- 4" x 4" , rubber stator , rubber seal ring , spares for high flow progressive cavity pump model:- aip 6060 s make:- akanshi industries pump sizes :-6" x 6" for f.m. pumps , rubber stator , coupling rod , shaft head , pin , rubber boot seal , rubber seal ring , rubber sleeve ring , bush , s.s rotor , circlip lock , c.i. 3 groove v-belt pulley section-c with pilot bore , od = 305 mm , od = 380 mm , od = 450 mm

CTN :45732498

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of pump & pump spares injection pump no.4 make : varun model: dbv 250/32 a , impeller s.s 304 , spares for kirloskar make juice sulphiter pump make:- kpd150/43 discharge :- 90m /hr total head :- 50 mtr , s.s 304 casing cover plate , vapour line juice heater kpd 40/32 make :- kirloskar , c.i casing cover plate , semi kastner condensate water pump make :- sintech model cp 100/400 capacity 150 mtr , s.s 304 impeller , syrup pump bnc 65/32 , c.i housing with both side oil seal cover complete , pump spare for rota type pump make:- gita, model :- 10rmg size:- 250 x 250mm , cast iron rotor is:210 fg 260 o.d of rotor - 360 mm bore of rotor - 76 mm width of rotor 375 mm , pump spare for rota type pump make:- gita, model :- 8rmg size:- 200 x 200mm , cast iron rotor is:210 fg 260 o.d of rotor - 305 mm bore of rotor - 75 mm width of rotor 325 mm , sulphuric acid transfer bare pump: model: pvdf160r suction/discharge:50x40mm rpm:2900,with mechanical seal face gft bellow ceramic shaft en-8 suitable for 98% concentration sulphuric acid technical data sheet will be provided with technical bid , sdg out let shaft pump model: kpd 65/32 capacity: 30m3/hr head: 20m moc: ci (casing & impeller), shaft- ss410 gland packed suitable for sdg outlet technical data sheet will be provided with technical bid

CTN :45704226

11 Jul, 2026 2.99 Lacs

Gajraula - Uttar Pradesh

Tender For supply of high pressure pump spares b b - ss rotor risansi make , rubber stator risansi make , ss bush risansi make , ss pin risansi make , ss connecting rod risansi make , shaft head risansi make , circlip lock risansi make , ss shaft risansi make , ci berrel risansi make , crease seal risansi make , head pin risansi make , cs berrel risansi make , stuffing box risansi make , head key risansi make , bearing housing risansi make , sleeve risansi make , rupper seal risansi make , rubber sleev ring risansi make , high flow pump ropman make , rubber stater ropman make , ss bush ropman make , ss pin roopman make , ss connecting rod ropman make , shaft head ropman make , lock roopman make , ss shaft ropman make , ci berrel ropman make , grease seal ropman make , head pin ropman make , cs berrel ropman make , stuffing box ropman make , head key ropman make , bearing housing ropman make , sleeve ropman make , rubber seal ring ropman make , ruber sleeve ring ropman make

CTN :45606519

03 Jul, 2026 NA

Coonoor - Tamil Nadu

Tender For corrigendum : supply of machinery spares and workshop tools to all tantea factories - machinery spare, uj cross (srmt make) rll 793 type 47mm x 134mm (big cup), uj cross (srmt make) rll 790 type (small cup), uj cross 39.69 mm x 115.65 mm, uj cross 34.94 mm x 125 mm, propeller shaft - for sennova ctc, teflon bellow for kilnburn drier ff model 5500 mm x 250 mm x endless, teflon bellow 250 mm width x 5240 mm endless, teflon bellow 250 mm width x 5250 mm endless, teflon bellow 4000 mm x 250 mm x endless, teflon bellow 4400 mm x 250 mm x endless, gun metal gable bush for 18" rotor vane (l-160mm, id-79mm, od-112mm), arm centre gun metal bush for 18" rotor vane (l-75mm, od-68mm, id-48mm), coupling set for 18" dia rotor vane shaft (78 mm bore 22 mm x 6 mm key size) (vikram make), coupling set for 18" dia rotor vane shaft (95 mm bore 26 mm x 6 mm for gear box shaft end key size (vikram make), gable bush (gun metal) od-95mm, id- 69.5mm, l-125mm, gable bush (gun metal) od-106 mm, id- 80 mm, l-160 mm, arm centre bush (gun metal od-75 mm, id-38mm,l-100 mm, arm centre bush (gun metal od-63 mm, id-50.8 mm, l- 76mm, rotor vane 18" coupling rubber bush, rotor vane 15" coupling rubber bush, rotor vane 18" coupling pin, rotor vane 15" coupling pin, hammer (for impact pulverizer), beater (for kaysons pulverizer), bucket elevator conveyor, elevator bucket (s.steel), round type rubber bush, square type rubber bush, gun metal split bearing for middleton (split bush), frp - strip (teflon) size 2"x1/4"x13", frp strips 2"x13"x 5mm thick, 12"x2"x6mm frp teflon blade for green leaf sifter, shredder blade l- (17.5mm) 445mm, bore - 45mm, width - 75mm, thickness - 6mm, m.s. sheet-8x4x18g, gun metal bush od-39 mm, id- 19mm, l-45mm, nylon bush od-39 mm, id- 19mm, l-45mm, gun metal bush od-30 mm, id- 12mm, l-45mm, workshop tools, 52 lh single angle milling cutter m+15 (addision make), 55 lh single angle milling cutter m+15 (addision make), 62 lh single angle milling cutter m+15 (addision make), 65 lh single angle milling cutter m+15) (addision make), 60 lh single angle milling cutter m+15 (addision make), 70 lh single angle milling cutter m+15 (addision make), 10 tpi v profile grooving chaser m+15-102 th (addision make), 8 tpi v profile grooving chaser m+15 -120th (addision make), 8"x1"x1/2" green colour grinding wheel rough & smooth, 8" dia grinding wheel rough & smooth, 4" dia disc grinding wheel, grinding stone 8"x1"x5/8" rough and smooth, cup shape grinding stone, 16" x4" grinding wheel 1" thick, 4" cut off wheel, 24" measuring scale - metal, mesuring tap 3 mtr

Central Government/Public Sector

CTN :45704455

17 Jul, 2026 NA

Koraput - Odisha

Tender For tender for supply of spares for ir make pneumatic gun - rotor blade (5 nos set) for pneumatic gun model no2gl(c)a-20000 part no 753341 make ingersoll-rand , roll pin for pneumatic gun model no2gl(c)a-20000 part no 81561 make ingersoll-rand , cap for pneumatic gun model no2gl(c)a-20000 part no 753335 make ingersoll-rand , adapter for pneumatic gun model no2gl(c)a-20000 part no 753338 make ingersoll-rand , end cap for pneumatic gun model no2gl(c)a-20000 part no 753340 make ingersoll-rand , reducer for pneumatic gun model no2gl(c)a-20000 part no 753343 make ingersoll-rand , lever for pneumatic gun model no2gl(c)a-20000 part no 753344 make ingersoll-rand , roll pin for pneumatic gun model no2gl(c)a-20000 part no 84452 make ingersoll-rand , collet for pneumatic gun model no2gl(c)a-20000 part no 753347 make ingersoll-rand

Turbine Rotor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector