Latest turnbuckle Tenders | Government turnbuckle Tenders

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

State Government

CTN :45732637

02 Jul, 2026 49.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.

Central Government/Public Sector

CTN :45738400

10 Jul, 2026 NA

Goa - Goa

Tender For dee shackle patt. no. 0263/721-6089. ss to aisi 316 bright finish , turnbuckle assembly without slip 0263/539-6387 0.75t s. w. l. ss to aisi 316 bright finish , ferrule for 10mm f. s. w. r 0263/411-9736 , ferrule for 14 mm f. s. w. r 0263/411-9738 , thimble to suit 10mm f. s. w. r 0263/923-6988. ss to aisi 316 bright finish

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

Central Government/Public Sector

CTN :45492036

06 Jul, 2026 NA

Kota - Rajasthan

Tender For corrigendum : special repair for replacement of ci/ gi water pipe line into di (ductile iron) pipe line in gtc area at mil stn kota

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.

Corporations/Associations/Others

CTN :45673452

01 Jul, 2026 1.23 Lacs

Multi City - Karnataka

Tender For supply of material to repair of cast iron in jackwell in water supply unit alur tp - ci double flanged pipes 150mm dia 6 feet length, ci double flanged pipes 150mm dia 3 feet length, providing ductile iron push on special confirming to is 9523 2000 - all d.i. flanged mj collar 150mm, providing ductile iron push on special confirming to is 9523 2000 - all d.i. flanged mj collar 200mm, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as pe is 694-1990 with isi marks and as per its latest amendments for 1x3x4 sqm

Central Government/Public Sector

CTN :45388777

29 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of push-rod assembly with turnbuckle used in machine 2 mom

Turnbuckle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors