Latest turning tool holder Tenders | Government turning tool holder Tenders

Central Government / Public Sector

CTN :45283817

11 Jun, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of 25kgs bag of earth conductivity enhancement back-filling material for treatment of earth pits. (thecompound shall contain conductive cement- 15%, graphite carbon powder - 45%, hydrous aluminum silicate- 10%,sodium montmorillonite- 30% and shall not contain bentonite)it shall be tested and confirm to the requirements of iec 62561-7.the earth enhancement material shall be supplied in sealed, moisture proof bags. these bags shall be marked with manufacturer?s name or trade name, quantity etc. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45227654

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For file cover card board thick rwf-1 as per specification no.rwf/gsd/ls/02 & annexure a & b enclosed. ]consignee general stores depot/rwf, rwfkarnataka 9731.00 numbers3. t and cf.o.rdescriptiondestinationdelivery perioddescriptiondelivery /completionrate of supplyfor all items completion : within 3 months---payment termss.nodescriptionpayment terms1 100% payment against receipt, inspection and acceptance of material by the consignee atdestination.statutory variation clauses.nodescriptionpage 1 of 11run date/time: 15/05/2026 22:53:49stores/rwftender documenttender no: p1261891closing date/time: 22/06/2026 10:451 statutory variation in taxes and duties, or fresh imposition of taxes and duties by state/ centralgovernments in respect of the items stipulated in the contract (and not the raw materials thereof),within the original delivery period stipulated in the contract, or last unconditionally extended deliveryperiod shall be to railways' account. only such variation shall be admissible which takes place afterthe submission of bid. no claim on account of statutory variation in respect of existing tax/duty will beaccepted unless the tenderer has clearly indicated in his o er the rate of tax/duty considered in hisquoted rate. no claim on account of statutory variation shall be admissible on account ofmisclassification by the supplier/ contractor.railway standard fall clauses.nodescription1 not to be includedstandard governing conditionss.nodescription1 irs conditions of contract: the contract shall be governed by latest version (along with all correctionslips) of irs conditions of contract, and all other terms and conditions incorporated in the tenderdocuments.4. eligibility conditionsspecial eligibility criterias.no.descriptiontemplateconditionapplicabilityconfirmationrequiredremarksalloweddocumentsuploading1 nilnormalapplicable toall biddersyes yes allowed(optional)page 2 of 11run date/time: 15/05/2026 22:53:49stores/rwftender documenttender no: p1261891closing date/time: 22/06/2026 10:452 attention of bidders is invited to thefollowing with refere [attention ofbidders is invited to the followingwith reference to make in indiapolicy: - para 19.0 of section ii (pagesfrom 46 to 47) of attached document- lt conditions stands deleted. theprovisions for preference to make inindia policy will be applicable as perthe public procurement [preferenceto make in india] order 2017 -revision issued by ministry ofcommerce and industry, departmentfor promotion of industry andinternal trade [public procurementsection]vide their order no.p-45021/2/2017-pp[be-ii]dtd.15.06.2017, 28.05.2018,04.06.2020, 16.09.2020,04.03.2021,19-07-2024 and as applicable as onthe date of tender opening. withreference to the provisions of therevised public procurement[preference to make in india], order2017, it shall be noted that:[i]minimum 50% local content isrequired for mii compliance to qualifyas a class-i local supplier to avail thebene ts of mii policy. [ii]for class-iilocal suppliers, the minimumrequired local content is 20%. [iii]theclass-i local supplier/class-ii localsupplier shall be required to indicatepercentage of local content andprovide self-certi cation from theoem that the item o ered meets thelocal content requirement for class-ilocal supplier/class-ii local supplier ,as the case maybe. [iv]they shallalso give details of the locations atwhich the local value addition ismade. the bidder shall upload thedocument along with the bid. o ersreceived from non local-suppliers i.e.,local content forgoods/works/services tendered isless than the prescribed for class iisuppliers as above or as applicableon the date of tender opening willnot be considered for placement ofany order. [copy of railway boardsletter dated 20-08-2024 & dpiitsorder dated 19-07-2024 attached]]

Central Government / Public Sector

CTN :45240664

10 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply of jungle boot;-1. upper shall consist of polyester viscose (pv) fabric, water-repellent as an outer layer and 100% non- woven nylon (camarilla type) lining as inner layer. the two fabrics shall be adheredtogether with flexible adhesive and polyurethane foam of 5 mm thickness. colour-olive green,colour of sole and toe cap-black (for all other boots),blend composition of polyester viscose fabric water repellent-polyester-80% viscose-remainder.binding material of polyester blended fabric, black having blend compositionof polyester-67%, cotton -33% & confirming to is:15852-2009 for colour fastness to light, washing & ph value. in socks- in sock each boot shall be provided with a detachable 4.0 mm + 1.0 mm thick full in sock of compressed molded rubber having instep arch support and adequate ribs for grip ad comfort. the outer layer of the knock hill be covered with cambrelle type material in black color. toe cap &stiffener well struck heat activated thermoplastic toe puff & stiffeners of minimum thickness 1.5 mm & 2 mm respectively shall beused.thread polyester- nil lace each pair of boots shall be provided with a pair of nylon black laces of length160 +width 6 cm. thickness of sole in the finished condition, 1 min. thickness of sole 4mm 2. cleat height 2.5 mm 3. thickness of sole when measured from outside with side wall forepart 20mm. 4.thickness of sole when measured at waist from outside with side wall(mm)16, 5. thickness of sole when measured at heel from outside with side wall(mm) (min)35. 6. mass the mass of one pair of finished boots of size 8 shall be750 to 850 gms with an increase or decrease of 50 gms for each bigger or smaller size respectively. 7-marking the outsole of the boot must be embossed /engraved with the manufacturers name or his recognized trade mark, size, month and year of manufacture.8- packing each pair of boots shall be packed in individual boxes to prevent damage. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45241837

09 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply of cloth angola for shirt (1.63 mtrs.)/no or similar.:-i)the yarn used to manufacture the fabric shall be made from uniform and intimate blend of 50-50 poly wool in drab shade. ii)the fabric shall be uniformly woven in plain wave and the selvedge shall be firm and straight, the fabric shall be well signed. the fabric shall be heat set and fully shrunk. iii)no major flaws (defects) in the fabric are allowed. no flag allowance will be accepted for the major flaw (defects) iv)the number of pieces to be selected at random form a lot for inspection shall be accorded and method of test as per is:8331 :2003. v)the manufacturer name of trade mark shall be woven on the both side of selvedge throughout the length using suitable yarn. the same shall be clearly visible even after processing/finishing. vi)material to be supplied in a cut length of cloth for cloth shirting angola 1.63 mtrs. each number/piece shall be packed in button down/seal tape poly bag printed with railway protection force, east coast railway, bhubaneswar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45194174

20 May, 2026 NA

Multi City - Multi State

Tender For carbide insert snmg 190612 tn 4000 or equivalent make of kennametal or widia or sandvik or walter compatible with turning tool holder - psbnl 3232 p19 shank left hand. make - widia. (before bulk supply, 02 nos samples are required to be got approved by consignee) [ warranty period: 30 months after the date of delivery ] ]

CTN :45160053

18 May, 2026 1.98 Lacs

Karauli - Rajasthan

Tender For purchase material for copa trade - local area network cable , dvr cable , rj 45 connector , cmos battery , 24 port network switch , keyboard , mouse , mouse pad , smps , 9 v battery , air conditioner , cable tie/stopper/data bus bar

Central Government/Public Sector

CTN :44304953

04 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras bid to ras corrigendum : supply of turning tool sl. no. 1 as per drawing, drg no. 04-tl009 , straight turning tool holder i ndexable, pin type spec: aa6260170, size: psdnn 5050 t25 , tool holder ssbcl 5050 t38, size: iso std

Central Government/Public Sector

CTN :45014172

08 May, 2026 NA

Multi City - Multi State

Tender For carbide insert snmg 190612 tn 4000 or equivalent make of kennametal or widia or sandvik or walter compatible with turning tool holder - psbnl 3232 p19 shank left hand. make - widia. (before bulk supply, 02 nos samples are required to be got approved by consignee) [ warranty period: 30 months after the date of delivery ]

CTN :42330340

29 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of turning tool holder svjbl 2525 m16. , h. s. s. tool bits hardened & ground , m/function t/holder dr- mf16r-2.25d. , m/function t/holder dr-mf-16l-2.25d.