Latest turret punch press Tenders | Government turret punch press Tenders

Central Government And Public Sector

CTN :45283295

26 May, 2026 NA

Guwahati - Assam

Tender For supply testing & commissioning of oil filling plant with flow control for tranfformer and power converter for three phase locomotives as per enclosed annexure. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45228357

25 May, 2026 5.86 Lacs

Panchkula - Haryana

Tender For providing material at haryana chief minister residence, house no. 2, sector-03, chandigarh - supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the engineer-in-charge including screening through sieve of i.s.designation 16 mm with 5 km lead. (hsr 26.1)supplyoffertilizer:-urea 45 kg bag. ho-006dap 50 kg bag. ho-007vermicompost 50 kg bag.ho-030neem khaad 50 kg bag(ho003)mop 50 kg bag- (ho034)greenfield khad 50 kg bagcalcium nitrate 25 kg bagsupply of insecticidesandpesticides.radar chloropyriphos 20% e.c ho-149bavastin/carbendazim50% 500 gm pkt30% offblitox 50% 500gm pktterror 505rounduop glyphosatevictor imida cloprid 17.8%malathion 50%supplying and stacking of good quality top layer garden earth free from debris and weed, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20% for payment) only for filling of pots and flower beds. (hsr 26.2)supplying at site of work well-screened yamuna sand and neem cake at site of work and making mixture in ratio 3:1 (hsr 26.3.4)supply and planting ground cover plants including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.0508 cum per sqm fertilizer dap 50 gms and insecticides chlorpyriphos 10ml per sqm planting of saplings at 23cm distance from plant to plant and row to row, minimum 19 no. plants per sqm (hsr 26.26) supplying healthy, well branched, well bloomed and planting rose beds including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.0508 cum per sqm, fertilizer dap 50 gms and insecticides chlorpyriphos 10ml per sqm, planting of hybrid budded rose saplings to be supplied in earthen pots /20cm x20cm polybags, planting of sapling at 45 cm distance from plant to plant and row to row and 5 no. plants per sqm (hsr 26.30)supply of permanent edging plants around beds, lawn or along paths including of digging of trench 45 cm wide to 15 m depth, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or wo rows @1lno. well-trimmed bushy,multi branched,30 m to 45 cm in height plants to be supplied in 15 cm x 15 m poly bags per sqm. (hsr 26.32)supply of well brunt, cylindrical earthen pots of 25 cm size and filling to full volume with mixture of good earth and manure in the ratio of 2:1 (two par of good earth & one part of manure) and placing them on appropriate place i/c carriage of good earth, manure and pots upto 50 mtr., as per direction of officer in charge. (hsr 26.38.3)supply of well brunt, cylindrical earthen pots of 30 cm size and filling to full volume with mixture of good earth and manure in the ratio of 2:1 (two par of good earth & one part of manure) and placing them on appropriate place i/c carriage of good earth, manure and pots upto 50 mtr., as per direction of officer in charge. (hsr 26.38.4)provision circular/ square cement concrete pots of 35cm x 35cm size, cast with cement concrete of nominal mix 1:2: cement: coarse sand: graded stone aggregate 6mm mominal size), i/c required from work, finishing with cement punning on expose surface, curing for specified period & stacking in required rows & height, all complete as per direction of officer-in-charge and filling 2/3rd volume with mixture of good earth and screened manure in the ratio of 2:1 (two part of good earth & one part of manure) and placing them on appropriate place. (hsr 26.39.2)seasonal well bloomed flower seedlings in 20 cm size ofpots (hsr 26.41.1) seasonal well bloomed flower seedlings in 25 cm size of pots (hsr 26.41.2)supply and planting f1 hybrid seasonal plants in well bloomed flowering stage in 30 cm size of pots (hsr 26.41.3)korean/spray type chrysanthemum cuttings in 25 cm size of pots, 3 cutting per pot. (hsr 26.42.1)ball type dahlia/chrysanthemum cuttings in 25 cm size of pots 3 cutting per pot. (hsr 26.42.2)planting and su

State Government

CTN :45228359

25 May, 2026 5.92 Lacs

Panchkula - Haryana

Tender For providing material at haryana chief minister residence, house no. 1, sector-03, chandigarh - supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the engineer-in-charge including screening through sieve of i.s.designation 16 mm with 5 km lead. (hsr 26.1)supplyoffertilizer:-urea 45 kg bag. ho-006dap 50 kg bag. ho-007vermicompost 50 kg bag.ho-030neem khaad 50 kg bag(ho003)mop 50 kg bag- (ho034)greenfield khad 50 kg bagcalcium nitrate 25 kg bagsupply of insecticidesandpesticides.radar chloropyriphos 20% e.c ho-149bavastin/carbendazim50% 500 gm pkt30% offblitox 50% 500gm pktterror 505rounduop glyphosatevictor imida cloprid 17.8%malathion 50%supplying and stacking of good quality top layer garden earth free from debris and weed, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20% for payment) only for filling of pots and flower beds. (hsr 26.2)supplying at site of work well-screened yamuna sand and neem cake at site of work and making mixture in ratio 3:1 (hsr 26.3.4)supply and planting ground cover plants including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.0508 cum per sqm fertilizer dap 50 gms and insecticides chlorpyriphos 10ml per sqm planting of saplings at 23cm distance from plant to plant and row to row, minimum 19 no. plants per sqm (hsr 26.26) supplying healthy, well branched, well bloomed and planting rose beds including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.0508 cum per sqm, fertilizer dap 50 gms and insecticides chlorpyriphos 10ml per sqm, planting of hybrid budded rose saplings to be supplied in earthen pots /20cm x20cm polybags, planting of sapling at 45 cm distance from plant to plant and row to row and 5 no. plants per sqm (hsr 26.30)supply of permanent edging plants around beds, lawn or along paths including of digging of trench 45 cm wide to 15 m depth, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or wo rows @1lno. well-trimmed bushy,multi branched,30 m to 45 cm in height plants to be supplied in 15 cm x 15 m poly bags per sqm. (hsr 26.32)supply of well brunt, cylindrical earthen pots of 25 cm size and filling to full volume with mixture of good earth and manure in the ratio of 2:1 (two par of good earth & one part of manure) and placing them on appropriate place i/c carriage of good earth, manure and pots upto 50 mtr., as per direction of officer in charge. (hsr 26.38.3)supply of well brunt, cylindrical earthen pots of 30 cm size and filling to full volume with mixture of good earth and manure in the ratio of 2:1 (two par of good earth & one part of manure) and placing them on appropriate place i/c carriage of good earth, manure and pots upto 50 mtr., as per direction of officer in charge. (hsr 26.38.4)provision circular/ square cement concrete pots of 35cm x 35cm size, cast with cement concrete of nominal mix 1:2: cement: coarse sand: graded stone aggregate 6mm mominal size), i/c required from work, finishing with cement punning on expose surface, curing for specified period & stacking in required rows & height, all complete as per direction of officer-in-charge and filling 2/3rd volume with mixture of good earth and screened manure in the ratio of 2:1 (two part of good earth & one part of manure) and placing them on appropriate place. (hsr 26.39.2)seasonal well bloomed flower seedlings in 20 cm size ofpots (hsr 26.41.1) seasonal well bloomed flower seedlings in 25 cm size of pots (hsr 26.41.2)supply and planting f1 hybrid seasonal plants in well bloomed flowering stage in 30 cm size of pots (hsr 26.41.3)korean/spray type chrysanthemum cuttings in 25 cm size of pots, 3 cutting per pot. (hsr 26.42.1)ball type dahlia/chrysanthemum cuttings in 25 cm size of pots 3 cutting per pot. (hsr 26.42.2)planting and su

Corporations And Associations And Others

CTN :45247438

25 May, 2026 NA

Khanna - Punjab

Tender For labour contract for packing filling vanaspati refined oils/loading unloading markfed products at khanna plant for one year.

Central Government And Public Sector

CTN :45059362

02 Jun, 2026 23.56 Lacs

Chittorgarh - Rajasthan

Tender For corrigendum : assistance in operation of crystallizer, filling of na2so4 powder in bags and stitching, shifting, stacking of bags in crystallizer plant, dissolution of sodium sulphide flakes and digging, shifting of sodium sulphate (glauber salt) at hwpk site

CTN :45250900

29 May, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of nitrogen filling plant & allied eqpt

CTN :45034568

23 May, 2026 NA

Palwal - Haryana

Tender For corrigendum : supply of supply material and maintenance manpower for railway track maintenance at piyala lpg plant : : - skilled manpower , semi skilled manpower , unskilled manpower , replacement of sleepers , shifting and filling of ballast , supply of j clip , supply of ms liner , supply of 60 kg fish plate , supply of 60 kg junction plate , supply of 52kg fish plate , supply of 52kg junction plate , supply of check rail bolt nut , supply of stud bolt , supply of ballast , supply of psc sleeper up to 2.85m , insulation joint , rubber pade

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

corporations/Associations/Others

CTN :45034145

27 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :45071968

22 May, 2026 NA

Indore - Madhya Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - split ac 1point 5 ton; gas filling reqd; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - split ac; service reqd; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - split ac 1 point 8 ton; not working; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - sithi mt handheld brush cutter; overheating and vibration; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - reprographic machine; not working; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - reprographic machine; developer need to be repair; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - digital multifunctional copier konica minolta; developer drum faulty; service provider,repair, maintenance,

Turret Punch Press Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

Corporations And Associations And Others

Central Government And Public Sector

corporations/Associations/Others