Latest twin Tenders | Government twin Tenders

State Government

CTN :45315828

15 Jun, 2026 321.06 Crore

Vijayawada - Andhra Pradesh

Tender For design, engineering, manufacturing, testing before dispatch, loading, supply for destination including transportation, civil & construction works, erection, testing and commissioning of the following on ls basis.erection of 400kv dc line (approx. 118.440 km) with twin acss moose conductor by making lilo of 400kv krishnapatnam - sembcorp-p2 quad moose line to the proposed 400/220 kv sanampudi sub-station, singarayakonda mandal, prakasam district on tmdc towers (wind zone-5).

State Government

CTN :45315844

15 Jun, 2026 9.18 Crore

Vijayawada - Andhra Pradesh

Tender For design, engineering, manufacturing, testing before dispatch, loading, supply for destination including transportation, civil & construction works, erection, testing and commissioning of the following on ls basis.1. dismantling of badly rusted towers and erection of new towers at loc nos. 3, 4, 7, 8, 9 and 10 and replacement of twin moose conductor with twin al 59 conductor in 400kv kalapaka - stpp 3 and 4 tmdc line (3.655km). 2. dismantling of badly rusted towers and erection of new towers at loc nos. 7 and 8 in 400kv kalapaka - stpp -2, vemagiri tmdc line. (wind zone-5)

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45313264

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap and unserviceable condemned multicore copper cable/wire, jelly filled copper cables, signaling cables of pvc insulated of different diameter and length, and different types of similar and dissimilar muilticore copper cables with or without lugs, ms/ aluminium armoured, ms nut, fibre, lead, glass wool, etc attachment of sort and sizes. (qty approx) (note-cpcb or state pcb licence required and same are to be produce at the time of delivery with log book. otherwise, material will not be delivered.)

State Government

CTN :45289854

30 May, 2026 6.13 Lacs

Srinagar - Jammu And Kashmir

Tender For upgradation beautification of conference hall of medicine department by way of supply, installation, testing and commissioning of inverter type hot and cold reversible acs in conference hall of medicine department at govt. smhs hospital srinagar - supply, installation, testing, and commissioning of hot and cold 1.76/2.0 tr dc inverter type split ac unitcomprising of indoor and outdoor units with r-410a/32a refrigerant (green gas) having twin rotary compressor, indoor motor, outdoor motor, expansion valve and a remote-control unit with allied accessories. acshould be suitable for operation on 50 hz single phase ac supply both the indoor and outdoor units shall be installed on wall and wallifloor brackets respectively as per requirement to hold the units and should be complete with all default accessories as per oem like hooking arrangements, fixtures, frames for holding indoor and for resting outdoor units, drainage piping etc. the price is exclusive of cabling.copper tubing and nitrile foam

State Government

CTN :45290543

12 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For rate contract for stationery and office supply items - stationary items, photocopy paper a4 size (xerox), photocopy paper a3 size (xerox), file pad, top secret file pad, l- shape folder (transparent), twin pocket pp presentation folder, box file, ring binder file (student/small), ring binder file (medium), photo copy paper colour a4, tag, lace, u pin, register 2q, register 4q, punching machine small dp 52, punching machine big dp 500, stapler machine small, stapler machine big, stapler pin small no-10, stapler pin big no-24/6, white envelope superior (11x5), white envelope superior (9x4), white envelope (fs), yellow envelope (a4), yellow envelope (a3), post it (2x3), post it (3x3), self adhesive cello tape 1", self adhesive cello tape 2", self adhesive tape colour 1", self adhesive tape colour 2", cd marker ohp, v-7 pen, v-5 pen, add gel pen, uniball pen, ordinary pen, spiral diary, program stand, add gel pen refill, t-pin, u pin steel, gum tube, gum bottle big, gum bottle small, glue stick, pad ink bottle, pentonic ball pen, highlighter, board marker, scissors (small), scissors (medium), scissors (big), white fluid pen, dak pad, pencil pkt., sealing wax packet, sketch pen set, pocket card, ink pad plastic, document button folder, document strip folder, pokar (steel handle), pokar (plastic handle), paper cutter, officer diary, plastic flag, steno diary, sticky note pad, fevicol, cobra spring file, white board small, white board big, dot matrix printer computer paper, eraser, sharpeners, calculator big, calculator small, parker pen ink, do letter paper a4, file tray, scale steel, binder clip 19mm, binder clip 32mm, wipro spiral diary, magnetic white board duster, room freshner, air wick refill, black hit, all out machine with refill, all out refill, hand wash pouch, phenyl (01 ltr.), harpic, phool jhadu, seenk jhadu, pocha dande wala, wiper, naphthalene balls (phenyl goli), knife (coconut cutter), duracell aa, duracell aaa, wall clock cell aa, battery 9v, electric cattle, small squat glasses (borosil), glass medium (borosil), borosil radius cup and saucer set, air tight jar (borosil) 1000ml, air tight jar (borosil) 500ml, quarter plate, towel, napkin towel, dusting cloth, bowl, spoon packet, service tray (full size), bone chaina cup set, steel tea stainer, induction cook top, odonil, tissue paper normal, air wick spray machine, file bag, doormat (joot), doormat (plastic), lizol floor cleaner, bathroom fragrance (aer power pocket), plastic bucket, dustbin, plastic mug, umbrella small (pocket), umbrella big, wireless bell, ac top, 2 pin top, electric tape, micro lithium cell, micro lithium cell duracell, alkaline battery, rin bar detergent cake, dettol soap, bulb normal, led bulb 5 watt, led halogen light, led surface panel light, led pannel light (2x2), mosquito racket, spike, waste pipe, circle cable clip, led batten (complete tube rode), led bulb (9 watt), led bulb (9 watt) warm white, house electric wire 2.5 mm, house electric wire 1.5 mm, house electric wire 1.0 mm, flexible wire, siingle pole mcb 32 a, double pole mcb 32 a, t n p mcb, gang box(3x3), gang box (2x2), electric switch, electric socket 6 amp, electric socket 16 amp, modular switch 6a, modularswitch 16a, modular socket 6a, modular socket 16a, 3 pin plug 6 amp, 3 pin plug 16 amp, ss combined with box, capacitor 3.15 mfd, capacitor 4.0 mfd, colin, curtain rod steel, bracket for curtain, curtain rod stand, door closer, keyboard channel, screw 1", screw 1.5", lock 50 mm, lock 65 mm, cat 6 cable make d-link, rj 45 connecter, 5 port switch make d-link, usb printer cable (1.5mtr), usb printer cable (3mtr), usb printer cable (5mtr), vga cable (1.5 mtr), vga cable (3mtr), vga cable (5mtr), power cable, mouse pad, ups battery, crimping tool, lan cable stripper, cat 6 cable jointer, wi-fi dongle, ethernet lan port switch, keyboard make dell/hp, mouse make dell/hp, antivirus make quick heal (3 user), ms office professional license key 2024, mobile charger adapter for apple,

Central Government/Public Sector

CTN :45196149

29 May, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : supply of supply- clamps & connectors: 11kv, transformer bushing connector suitable for single/ twin conducto , supply- clamps & connectors: 11kv, bpi connector suitable for single/ twin conductor as per ts , supply- clamps & connectors: 11kv, isolator connector suitable for single/ twin conductor as per ts

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45300981

02 Jun, 2026 5.67 Crore

Wardha - Maharashtra

Tender For supplying of furniture to newly formed cgrf office, for jr. law officer and mini training centre under o&m circle wardha tq. dist. wardha.-providing, supplying and placing of godrej make beat fabric high back 1.00chair with head rest. seat/back assembly: the seat & back is made up of1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knittedfabric , over moulded high resilience polyurethane foam high back size:51.8 cm. (w) x 75.2 cm. (h) seat size : 49.0 cm. (w) x 48.8 cm. (d) highresilience (hr) polyurethane foam: the hr polyurethane foam ismoulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per is:7888for 25% compression. armrests: the adjustable armrest is designed with thefollowing features: • up-down adjustment– 8 steps (8.0±0.5 cm range) • heightadjustable armrest structure which is powder coated & fitted with an armresttop. • fixed armrest top is pu moulded over metal insert. front pivotsynchro mechanism: the adjustable tilting mechanism is designed with thefollowing features360° revolving type. • single point control. • front-pivot fortilt with feet resting on ground ensuring more comfort. • tilt tensionadjustment. • 4-position locking with anti-shock feature. • seat/back tiltingratio of 1:2 . back height adjustability: back can be adjusted in 5 positionsby manually. stroke of height adjustable spine is 7 cm. back height adjustabilityis applicable for high back and mid back chair. pneumatic heightadjustment: the pneumatic height adjustment has an adjustment stroke of10.0 ± 0.3 cm. pedestal assembly with castors: the pedestal is injectionmoulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheelcastors. the pedestal pitch-centre dia is ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. withcastors) . twin wheel castors: the twin wheel castors are injectionmoulded in black nylon. option of sliding seat mechanism: seat can beslide horizontally as per user convenience. stroke of seat slide is 5 cm. thisoption is available for revolving pedestal type of chair. overall dimensions ofchair seat height - min 45.0 to max 55.0cm. height - min 102.0 to max 119.0cm. width & depth of chair as measured from p

Central Government And Public Sector

CTN :45319818

15 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of twin hose for oxygen & acetylene gases as per iso 3821 for oxy-acetylene gas cutting system

Twin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors