Latest twist lock Tenders | Government twist lock Tenders

State Government

CTN :45304203

08 Jun, 2026 8.33 Lacs

Umaria - Madhya Pradesh

Tender For procurement of spares for dewatering pumps make-maxflow pumps type 50-smp1 installed at fuel oil unloading pump house at unit no. 1 and 2 sgtps mppgcl, birsinghpur - as per schedule, strainer, suction cover, pressure body, impeller (semi - open), impeller nut, impeller key, pump shaft, block, seal plate, oil seal, block bush, top spider, line spider, top spider bush, line spider bush, line shaft, top shaft, pump shaft coupling, bearing sleeve, ratchet plate, grease nipple, pump coupling, ratchet pin, top adjusting nut, coupling rubber, motor coupling, line shaft coupling, gasket, suspension pipe, delivery pipe, .

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

Central Government/Public Sector

CTN :45213837

01 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For corrigendum : supply of heavy duty tyre coupling complete set ph 160 , heavy duty tyre for tyre coupling ph 160 , bearing number rl 10 uls 12 any make , bearing number uls 13 rl 12 any make , bearing number 51224 any make , thrust bearing number 51226 , ball bearing number 1313 any make , ball bearing number 1316 any make , ball bearing number 4205 , ball bearing number 4206 , bearing number 21315k any make , pencil grinding stone p number 2608 620 012 dai 6mm length 20 , slide wrench 18 inch , wrench slide 6 inch , wrench slide 12 inch , wrench slide 15 inch , wrench pipe 6 inch , wrench pipe 10 inch , belt fastner number 65 alligator type , best quality asbestos rope 42 mm square end is 4687 1960 , best quality asbestos rope 12 mm dia is 4687 1960 , brazing rod 1 by 16 inch , brass brazing rod size 1 by 8 inch dai as per is 1278 , best quality asbestos rope 10 mm dia , steel wire rope 1 by 4 inch by 06 mm dia ungalvanised as per is 2266 , steel wire rope 08 mm dia ungalvanised as per is 2266 , steel wire rope 10 mm dia ungalvanised as per is 2266 , steel wire rope 1 by 2 inch dia 12mm ungalvanised as per is 2266 , steel wire rope 16 mm ungalvanised as per is 2266 , oil seal 90 x 120 x 12 , chain pully block capacity 2 ton lifting height 7 to 8 meter chain length 14 to 16 mtrs , rotex coupling m 65 complete set , spider for rotex coupling m 65 , dowty hydraulic gear pump model 3p3250cpssb , bearing 4210 , oil seal 72 90 10 , oil seal 52 72 10

Central Government And Public Sector

CTN :45318739

16 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of fluid level gauge fsa-0076 , fluid level gauge fsa-0254 , ball valve khb-25npt-3382 , seal for ball valve khb-25npt- 3382 , manifold block hydac part no. rm67429 , manifold block hydac part no. rm67473 , manifold block hydac part no. rm67461 , manifold block hydac part no. rm67435 , manifold block hydac part no. rm67441 , manifold block hydac part no. rm67442 , manifold block hydac part no. rm67443 , high pressure filter hydac part no. 1250495 , return line filter hydac part no. 1263017 , ball valve hydac part no. 3962308 , seal for ball valve hydac part no. 3393358 , ball valve khb-20npt-3382 , seal for ball valve khb-20npt-3382 , ball valve khm-40npt-3382 , seal for ball valve khm-40npt-3382 , heat exchanger gasket set 2kw , heat exchanger gasket set 4kw , heat exchanger gasket set 20kw , inspection cover rd475 , inspection cover rd250 , coupling assembly hydac part no. rm62874 , coupling assembly hydac part no. rm16234 , coupling assembly hydac part no. sp750084 , spider hydac part no. rm13425 , spider hydac part no. rm16335 , spider hydac part no. sp750090 , check valve hydac part no. 707521 , dir. control solenoid operated valve , pressure relief valve hydac part no. 6074635 , single station manifold block , connector plate , grub screw , ball valve khm-42lr-3385 , seal for ball valve khm-42lr-3385 , seal kit for pump hydac part no. 4014495 , seal kit for pump hydac part no. 4014489 , seal kit for pump hydac part no. 4566427 , gasket for inspection cover rd475 , gasket for inspection cover rd250 , mounting o-ring for adapter block , mounting o-ring for connector plate , mounting o- ring for pressure relief valve ) /bid number : gem/2026/b/7471539 * /dated: 25-05-2026 & & / bid document 1 / 46

Central Government/Public Sector

CTN :45318088

15 Jun, 2026 7.52 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of seal kit part no eea0020966 , seal kit part no eea0020978 , axle bolt part no 912a060000171 , axle bolt part no 912a060000170 , metric bush part no mbh150170140a , chain part no 250a050000031 , chain wheel 1 inch pitch part no 250b060000054 , gaskit part no eea0010863 , o ring part no seg1093 , spherical bearing part no stdc003047 , fan motor seal part no 627a00023003 , coupling flange part no eea0015406 , bearing block assembly part no 912m100000322 , v belt part no 811a050000160 , o ring part no eea0015407 , gasket part no eea0010862

CTN :45291537

05 Jun, 2026 2.99 Lacs

Darjeeling - West Bengal

Tender For tender for supply of repair maintenance and servicing of eot crane 2 ton - servicing and maintenance of cranes 02 ton an all allied works with load test. , bridge & cross traverse rail alignment by clamps fitting/ adjustment , replace repaire dsl or ip supply cable on long travel , replace current collector for smooth operation , hoisting motor 5.2kw , 3ph , sc servecing only , cross traverse motor 0.55kw , 3ph , sc servecing only , long travel motor 2.2kw , 3ph , sc servecing only , bridge wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , trolley crab wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , hoock block maintainance and replacement of defective part any of pullies , rope lock , pulley bearing , thurster bearing , cover fastners , replacement of hoist wire rope dia 12 6 nos 36 fibre core , hoist assembly maintenance and replacement of defective part any of coupling , brake shoes , bearing , spacer , shaft , gear. , equiliser pulley maintenance and replacement of defective part any of pulley , shaft , bearing , maintainance for span of the crane within limit , it must not wear wheels on either sides of flanges , maintainance for diagonals of crane within the limit , it must not wear flanges of lt wheels or must not get jam of lt motion , rubber buffers replacement , limit switch for any of motion long travel cross traverse hoisting ) , relay maintenance or replacement with accessories , cross traverse cable replacement , cross traverse cable trollies maintenance or replacement

corporations/Associations/Others

CTN :45171789

26 May, 2026 NA

Salem - Tamil Nadu

Tender For supply of spares for gravimetric feeders 7 items - feeder head pulley half coupling, feeder head pulley half coupling pin with lock nut & spring washer, feeder spares 1 set consists of i) belt tensioning guide block, ii) belt tensioning bush,iii) belt tensioning screw,, shear pin, idler bearing cup, rubber logged gun metal bush, head pulley bearing cup with retainer flange and plate

corporations/Associations/Others

CTN :45219193

03 Jun, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For procurement of spares for 36 inch gravimetric coal feeder of hp 1103 bowl mill - spares for 36" gravimetric coal feeder for hp 1103 bowl mill, coc drive assembly (without motor & gearbox), housing bearing for coc drive, coc drive key, shaft for coc take up, sprocket for coc take up, coc chain assembly, belt take up pulley, shaft for belt take up, housing belt take up, shaft screw for belt take up, bearing deep groove ball for belt take up, block for belt take up, belt scrapper assembly, drag link assembly - lh, drag link assembly rh, head pulley (without bearings & bearing blocks), casting cover for bearing, cap bearing, bushing head pulley, coupling drive stud, inlet support roller group, roller assembly weight span with cmmr (front end), weigh roller, roller assembly weight span (back end)

Central Government/Public Sector

CTN :45261947

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)cr 81018560199 bwta (2) nr 81038516466 bwta (3)cr 81018560274 bwta (4)nr 81038960399 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 and 25-03387 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45261949

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038660213 bwta (2) nr 81248960028 bwta (3)def 80248860017 bwta (4)nr 81038615855 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(78.390 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(78.390 mts) on approx basis , advice note no.25-03385 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Twist Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors