Latest uhf diplexer Tenders | Government uhf diplexer Tenders

CTN :45454289

17 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45172672

13 May, 2026 NA

Multi City - Bihar

Tender For corrigendum : supply, installation, commissioning and maintenance of electronic weighing machines at fair price shops and bihar state food & civil supplies corporation limited godowns in the state of bihar

CTN :45346428

15 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of renewable energy practical equipments - equipments for renewable energy practices:, rc phase shift oscillator oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram, strain guage characteristics kitac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristics kit input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer input supply: 230 v / 50 hz ac with regulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation. measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter input supply: 230 v / 50 hz ac with regulated internal dc supply unit. measurement principle: buoyancy (archimedes principle) using displacer element. tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement of temperature using pt100 input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath. measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to 150 c (or suitable laboratory range). display unit: digital temperature indicator with direct c display. accuracy: high accuracy with linearized rtd signal conditioning circuit. sign

CTN :45346446

11 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for res dept - purchase of lab equipments for res dept, rc phase shift oscillator (iemcode:o001)specifications: oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram., strain guage characteristi cs kit(iemcode:o002)specifications: ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. no rs.10,000 2 table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristi cs kit(item code: o003)specifications:input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer(item code: o004)specifications: input supply: 230 v / 50 hz ac withregulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter(item code: o005)specifications: input supply: 230 v / 50 hz acwith regulated internal dcsupply unit. measurement principle:buoyancy(archimedesprinciple) using displacerelement tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement oftemperature using pt100(item code: o006a)specifications: input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to

corporations/Associations/Others

CTN :44876875

30 Apr, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : selection of system integrator for supply, installation with client application and maintenance of electronic point of purchase (epop) devices at purchase centres for food and civil supplies department, uttar pradesh

Central Government/Public Sector

CTN :44956069

20 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For enhancing and strengthening of earthing arrangement & provision of surge protection device for signalling equipment's at station/lc/ibh/relay hut and telecom installation as per rdso tan no. sts/e/tan/3006, ver 3.1 dtd 30.06.2025 or latest amendment& balance work for enhancing the reliability of data logger, digital axle counters, electronic interlocking, power supplies etc. across bhopal division.

CTN :44466165

28 Mar, 2026 56.00 Lacs

Aliganj - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; supply and installation of hardware; buyer -suitable table teak wood fitted with back panel complete with different types of meters/switches, ac/dc supplies etc. required for testing of electronic circuits. insulation mats to cover below the table

corporations/Associations/Others

CTN :44018591

30 Mar, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : system integrator for supply, installation with client application and maintenance of electronic point of purchase (epop) devices at purchase centers for food and civil supplies department, uttar pradesh.

CTN :44250859

30 Mar, 2026 NA

Indore - Madhya Pradesh

Tender For supply of spare electronic cards for 50 v, 700 a dc power supplies

Uhf Diplexer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others