Get complete information related to latest Ultra Bush Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ultra Bush Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ultra Bush Tenders.
Tender For spare parts of cctv as per specification icf/md/spec-269, issue status -02, rev-00, 8channel nvr, dhi-nvr0804mggc parts must be complatible with cctv fitted in coaches of indian railway, sample to be approved before bulk supply for compatibility and fitment. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply and configuration of digital trans-receiver hand held 5 watt vhf set along with oem approved rechargeable battery, quick battery charger. helical antenna and belt clip conforming to rdso specification no.- rdso/spn/tc/107/2018version 2.1 with additional requirements: - (1) spot frequencies - configurable as per consignee requirement (2) technical parameter of vhf set should be as per rdso specification no.- rdso/spn/tc/107/2018 version 2.1 (3) battery details: capacity minimum 2300 mah, battery type- li-ion.the battery should be oem manufactured and bis certified(4) supply of one number of tuning kit with software to program shall be provided for each consignee, (5) spare antenna for vhf set-10 percent of total vhf set quantity antenna shall be provided as spare. (6) warranty a) for radios and quick battery charger 5 years, b) for battery packs shall be for 1year. (7) inspection - third party inspection. poc- firmshould submit copy of poc and rdso type test for the offered make & model along the bid on the date of opening of tender. the offered make & model should be as per railway board guideline to meet out technical suitability as per instruction given by railway. accepted make: made/model : motorola xir p6600i with ip67 battery or similar ,provided copy of poc and rdso type test is submitted on date of opening of tender. warranty period : upto 60 months from the date of supply [ warranty period: 60 months after the date of delivery ] ]
Tender For supply, installation & commissioning of unattended axle box acceleration measurement system (uabams) with ride index as per technical specification no. tm/im/434 rev.4 in passenger trains, alongwith consumables, technical support, and spare parts during warranty period. note: here uabams system means including accelerometers at axle and bogie level, data logger, junction box, tachometer, gsm & gps antenna etc. and all connectors and fixture all complete. ]consignee sse/p.way/sc, scrtelangana 2.00 numbersinspection details stage inspection not required2 602327400011service(y)non stock--- yesconsigneeinr description :training of 6 (six) railway officials for 1 week duration in railway premises in india. ]at (location) sse/p.way/sc, scrtelangana 1.00 numbers3 602327410016amc (y)non stock--- yesconsigneeinr description :operation charges of 02 (two) uabams per annum along with intermediate server including all the activities of software updates, data processing, report generation and sms alers as per the technicalspecification no. tm/im/434 rev-4 during the period of operation. the operations can be extended up to total 07 years on same rate, terms and conditions. including comprehensive annual maintenance of 02 (two) unattended axle box acceleration measurement system (uabams) and intermediate server. it shall includespare parts and dynamic calibration of accelerometers along with software updates for 07 years period. [ warranty period: 2 years, amc period: 7 years, rate of discounting: 10 % ] ]
Tender For supply, installation and commissioning of rake test rig complete along with trolley & flexible hoses each 3 mtrs. long with coupling to connect compressed air line, fp & bp pipe of coach to rig (02 nos. each - 01 as rig component, 01 as spare), suitable for twin pipe graduated released air brake testing of bg coaches as per testing procedure in indian railway, technical specification: rake test rig (rtr) equivalent to escort drg. no - 3kb 3032, confirming to rdso specification no. 02-abr-02 with latest amendments make/brand: universal or similar [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : on line tender from contractors for advertised tender for 2 no underground railway crossing work i.e laying of double circuit 11kv xlpe 185 sq.mm cable underground,main cable with spare cable across railway tracks including liasioning with railway authority.
Tender For corrigendum : supply, installation & commissioning of unattended axle box acceleration measurement system (uabams) with ride index as per technical specification no. tm/im/434 rev.4 in passenger trains, alongwith consumables, technical support, and spare parts during warranty period. note: here uabams system means including accelerometers at axle and bogie level, data logger, junction box, tachometer, gsm & gps antenna etc. and all connectors and fixture all complete. ]consignee sse/p.way/sc, scrtelangana 2.00 numbersinspection details stage inspection not required2 602327400011service(y)non stock--- yesconsigneeinr description :training of 6 (six) railway officials for 1 week duration in railway premises in india. ]at (location) sse/p.way/sc, scrtelangana 1.00 numbers3 602327410016amc (y)non stock--- yesconsigneeinr description :operation charges of 02 (two) uabams per annum along with intermediate server including all the activities of software updates, data processing, report generation and sms alers as per the technicalspecification no. tm/im/434 rev-4 during the period of operation. the operations can be extended up to total 07 years on same rate, terms and conditions. including comprehensive annual maintenance of 02 (two) unattended axle box acceleration measurement system (uabams) and intermediate server. it shall includespare parts and dynamic calibration of accelerometers along with software updates for 07 years period. [ warranty period: 2 years, amc period: 7 years, rate of discounting: 10 % ] ]
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed
Tender For manufacture and supply of 6400 mm thick web curved switch for 1 in 8.5 symmetrical split turnout on psc sleepers as per rdso drg. no. rdso/t-8708,alteration-1 (with latest alterations if any),complete with all fittings for 1 in 8.5, bg 60 kg turnout on psc sleepers i.e. all fittings for switch portion as per sub assembly no. t-8708 [with latest alteration] in accordance with rdso's standard drawing no. t-8707 [with latest alterations] including check rails & excluding elastic rail clips, metal liners and insulating liners. any addition/ modification to the list of fittings, issued by rdso in subsequent alterations up to the date of closing of tender is also to be supplied by the firm for which no additional payment would be made. confirmation to ir specification no. t-10- 2025 with latest alterations if any and irs-t- 62-2025(for end forging of thick web asymmetrical rail) or latest if any. (the alt in drawing and specification issued by rdso up to 10 days prior to tender closing date shall be applicable to this tender). as per note sl. no. 24 of rdso drg. no. t-8708, alt-01,"10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 8.5 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-8708) shall be supplied with every purchase order of 1 in 8.5 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 8.5 60e1a1 tws". note : - (i)the purchase of rails will be the sole responsibility of the manufacturer (bid including rail cost/per set) in terms of railway board letter no. 2022/track i(p)/fabricators dt. 31.07.2023.all 60kg rails should be of r-260 grade. (ii) list of fittings is attached. [ warranty period: 30 months after the date of delivery ] ]
Tender For providing and fixing of spare parts of sewer cleaning machine vehicle no. hr- 68-gv-8857 at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3:- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in- charge 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns items:-providing and fixing of spare part of sewer cleaning machine including cost of 1 no. control valve, 1 mtr. chain 10mm, 2 nos. chain sprocket, 4 nos. 1.5 hose nipple, 1 no. shaft 6 hole including handling and fixing charges complete in all respect to the entire satisfaction of eic.
Tender For annual maintenance contract for year 2026-27 and 2027-28 for carrying out, checking, maintenance and repair of caterpillar make two engines model c 9 & c18 mounted on track machine high output dynamic and stabilizing machine (dte) & shoulder cleaning machine (frm) working in n.e. railway with supply of spare parts for maintenance and repair of caterpillar make engines and deputation of competent service engineer by the firm as and when called upon to do so by the railway.