Latest ultra violet tester Tenders | Government ultra violet tester Tenders

Central Government/Public Sector

CTN :42965263

15 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of replacement of lt incoming panels at various locations and cable termination d d - room panel-2 as per technical spec and sow. , supply of gas operator room panel-3 as per technical spec and sow. , install, replacement, testing and commissioning of gas operator room panel-3 as per technical spec and sow. , supply of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , supply of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , supply of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , supply part for end termination. as per technical spec and sow. , service part for end termination. as per technical spec and sow. , supply part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , service part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , supply of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , laying of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , civil works - breaking of existing concrete and excavate the cable trench up to 60cm depth provide sand 45mm thick lay the3. 5 core 400sq. mm lt 1. 1kv ss4-gas operator room , civil works - breaking of existing black top road and excavate the cable trench up to 60 cm depth provide sand 45mm thick lay the 3. 5 core 70sq. mm lt. ss4 to fire service dept. , a. foundations for lt panels at all locations, b. creation of power room for lt panels in gas operator room with al partition

CTN :43073211

20 Dec, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of flash point open and fire point cleveland electrical heating , digital marshall apparatus for 6 inch dia sample , ring and ball apparatus , automatic compactor for bituminous mixes for 4 and 6 inches moulds , digital cone penetrometer for soil testing , speedy moisture meter , laboratory electric oven , pycnometer , particle size analysis , sand pouring cylinder apparatus , proctor penetrometer , laboratory vane shear apparatus, motorised , digital flexure testing machine , slump test apparatus , flow table apparatus for fresh concrete and flow table apparatus forself compacting concrete , bulk density , beam mould , mould, steel, for 70. 6mm cube , mould, cast iron, for 150mm cube , cylindrical mould, cast iron, split lengthwise 100mm dia x 200mm high , concrete mixer drum type, , curing tank for 12 or 48 cubes of 150mm or 70. 6mm size , vibrating table , vibratory hammer , buoyancy balance , air permeability apparatus blaine type , vicat apparatus , cement tensile testing machine , density basket , thickness gauge , length gauge , riffle sample divider , impact of jet apparatus , hot plate , measuring cylinder , density bottle for bitumen , vernier caliper , sample tray , electronic balance , spring balance

State Government

CTN :43055645

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 56/2025-26 interconnection work in various schemes under sub. division kishangarh renwal. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc

State Government

CTN :43055648

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 55/2025-26 interconnection work in various schemes under sub. div. sambhar lake. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc pipe lin

Central Government / Public Sector

CTN :43035522

24 Dec, 2025 7.59 Crore

Delhi - Delhi

Tender For providing sand pad foundation, fabrication, erection, welding, testing, painting, calibrating and commissioning of mild steel internal floating roof vertical cone roof tank (7990 kl cap) for ethanol and associated product pipeline, fh pipeline, foam system, allied civil works etc. at una terminal under pso.

State Government

CTN :42610429

16 Dec, 2025 4.70 Crore

Ernakulam - Kerala

Tender For corrigendum : supply of tools and electronics for creative corner project to 300 addresses as per the given addresses in annexure 2 on the tender form. - hand tools & accessories, ball peen hammer - (220gm), claw hammer - (220gm), sledge hammer, rubber mallet hammer, two in one screwdriver (8 inch), two in one screwdriver (10 inch), screwdriver 4"(+), screwdriver 4"(-), screwdriver 3"(+), screwdriver 3"(-), wood/block planer, line tester (7.5 inch), digital voltage induction tester, combination plier 8 inch, nose plier 6 inch, side cutting plier 6 inch, hacksaw mini, hacksaw large, junior hacksaw, adjustable spanner (thread type), spanner set - double-ended, spanner set - ring, f-clamps, g-clamp, wire stripper-plier, automatic wire stripper(2 in 1), hand saw 12 inch, hacksaw blade 12 inch, try square 6 inch, combination square, chisel flat inch, chisel flat 1 inch, wood carving chisel set, nails 1 inch, nails inch, drywall screw inch, drywall screw 1 inch, drywall screw 1 inch, self drilling steel screw 1inch, pipe cutter, spirit level - 3 vials, precision screwdriver set, silicon sealant gun, silicon sealant, pipe wrench, wire gauge, electrical & plumbing accessories, pvc reducer bush (1 x ), pvc elbow 90 (1 inch), pvc tee 1 inch, pvc tee inch, pvc elbow 90 ( inch), pvc mta ( inch), pvc fta ( inch), pvc threaded end plug ( inch), pvc end cap plain, 20 mm, 3/4" inch, pvc elbow 45 ( inch), pvc pipe 1 inch, pvc pipe inch, pvc solvent, teflon tape, pvc ball valve 1 inch, metal u clamp for pvc pipe 1 inch, metal u clamp for pvc pipe inch, pvc water tap inch, extension cords, 1-way switch, 2-way switch, 5 pin electrical socket, 3 pin plug, 3 core cable, 6 way modular gang box with top plate and cover, pvc insulated single core wire (1.5mm ), 8-way db box, pvc electrical conduit pipe, flexible electrical wiring pipes, saddle clip, batten holder, pendant bulb holder with wire and plug, pvc enclosure box (4x4x2), junction box 2-way, junction box 3-way, junction box 4-way, electrical elbow inch, screw inch, screw inch, screw 1 inch, wall plug packet 6mm, wall plug packet 8mm, electrical insulation tape, rccb, mcb, isolator, power tools and accessories, portable drilling machine (corded), drill machine stand, drill bit set, carbon steel hole saw set for wood(11-piece ), wireless drill, mini rotary grinding tool with accessories kit, heat gun, electric paint spray gun, gardening tools, budding & grafting knife, garden hose with connector and multi pattern spray gun, water level hose, secateur, pneumatic hand sprayer, hand sprayer, bucket large (rubber), bucket small (rubber), net pots, rubber coated gloves, wheel barrow, garden rake, rose can, garden shear, hand cultivator, hand fork, hand trowel/ transplanter, grow bag, budding and grafting tape, pick axe with handle, shovel, garden hoe (spade), small garden hoe (small spade), 3 in 1 soil meter for moisture, light intensity and ph testing, digital ph meter, drip irrigation set, programmable timer switch, mini submersible water pump, high-output electromagnetic air compressor, flexible transparent pvc tubing, safety items, fire extinguisher - 2 kg, safety helmet ratchet with spring face shield, nitrile gloves, first aid kit, safety goggles, safety mask, stationary, ruler-stainless steel 6 inch, ruler-stainless steel 12 inch, ruler-stainless steel 18 inch, ruler-stainless steel 1 meter, paper cutter knife - big, paper cutter knife - small, paper cutter blade - big, paper cutter blade - small, scissors (small), scissors (medium), measuring tape (5 meter), sand paper, hot glue gun, hot glue stick, instant adhesive, craft glue, woodworking adhesive, rotary cutter, rotary cutter blade, electronic and electrical materials:, digital multimeter, punching machine for led bulb, led bulb tikki machine, soldering iron 25 w, desoldering pump, 9w led kit (philips type), soldering lead-50g, heat sink compound-250g, toy screws pack, solder and desolder flux, soldering iron holder/stand with

State Government

CTN :42968843

05 Dec, 2025 64.82 Lacs

Varanasi - Uttar Pradesh

Tender For operation and comprehensive maintenance of stp having capacity of 200 kld at pump and 50 kld at iesd building in bhu, varanasi - operation & comprehensive maintenance of sewage treatment plant of required capacity with mmbr technology round the clock (24x7) by engaging qualified plant operator in three shifts of 8 hours duty of each using chemicals sodium hypochlorite, bio culture, consumables etc as required for maintenance and as directed by engineer-in-charge, the treated sewage shall have the acceptable parameter like phvalue, suspended solids, total dissolved solids (inorganic), bio chemical oxygen demand-bod (5 days at 20 degree centigrade), chemical oxygen demand-cod, ammonial nitrate, total kjeldahi nitrogen, oil & grease, colour and odour shall be within the limits as prescribed in relevant bis code and shall be reusable for horticultural purpose/flushing or recharge to sround water after treatment and chlorination. the treated samples shall be collected & tested monthly and report to be submitted to engineer-in-charge. rate shall be inclusive of cost of repairs to pumps and other electrical and mechanical components and maintenance of all installations if any, cost of watch and ward arrangement shall be made for the above sewage treatment plant etc., cost of testing treated water, complete including replacement of damaged diffusers if any, replacement of media of carbon and sand fillers etc as perterms and conditions complete as per direction & satisfaction of engineer-in-charge having capacity 50 kld sewage treatment plant, 1st year (for one year)., 2nd year (for one year)., operation & comprehensive maintenance of sewage treatment plant of required capacity with mmbr technology round the clock (24x7) by engaging qualified plant operator in three shifts of 8 hours duty of each using chemicals sodium hypochlorite, bio culture, consumables etc as required for maintenance and as directed by engineer-in-charge, the treated sewage shall have the acceptable parameter like phvalue, suspended solids, total dissolved solids (inorganic), bio chemical oxygen demand-bod (5 days at 20 degree centigrade), chemical oxygen demand-cod, ammonial nitrate, total kjeldahi nitrogen, oil & grease, colour and odour shall be within the limits as prescribed in relevant bis code and shall be reusable for horticultural purpose/flushing or recharge to sround water after treatment and chlorination. the treated samples shall be collected & tested monthly and report to be submitted to engineer-in-charge. rate shall be inclusive of cost of repairs to pumps and other electrical and mechanical components and maintenance of all installations if any, cost of watch and ward arrangement shall be made for the above sewage treatment plant etc., cost of testing treated water, complete including replacement of damaged diffusers if any, replacement of media of carbon and sand fillers etc as perterms and conditions complete as per direction & satisfaction of engineer-in-charge having capacity 200 kld sewage treatment plant, 1st year (for one year)., 2nd year (for one year).

CTN :42970123

19 Dec, 2025 6.49 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of supply and laying of 4c 50 sqmm copper armoured power cable from transformer to powerhouse at dnlh d d - supplying of the 4core x 50sqmm one length copper armored pvc insulated pvc sheathed xlpe power cable from transformer to power house , supplying of the 200a 3 pole 25 ka molded case circuit breakers mccb , laying and fixing pvc insulated and pvc sheathed xlpe power cable of 1. 1 kv grade on wall surface as required , supplying and making end termination with brass compression gland of cable , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete with all labour materials transport in hilly area , laying one number pvc insulated and pvc sheathed xlpe copper armoured 1. 1 kv cable in existing cement trench removing sand cushioning placing new cable properly with all labour tools , installation of 200a 3 pole mccb on existing db including dismantling old mccb making connections with suitable lugs and cables tightening terminals testing and commissioning as required. , supplying and fixing 400 400 15 mm seasoned wooden board for mounting 200a porcelain kit kat fuse at the powerhouse including cutting drilling anchor fasteners holes. , supplying and installing 200a porcelain kitkat fuse on pre fixed wooden board, including incoming outgoing cable connections with copper lugs , supplying and fixing 200a neutral link suitable for terminating multiple neutral cables in lt distribution system mounted on pre fixed wooden board , removing outer sheath of 4c 50 sqmm copper armoured xlpe cable up to 2 m and terminating each core at energy meter using heat shrink sleeves including supply laying , providing laying and fixing 75 mm dia medium class gi pipe in rcc road with gi fittings including 75 mm trenching refilling with rcc materials and using all necessary machinery tools etc. , cable jointing of existing 4c 50 sqmm xlpe copper armoured cable using approved heat shrink kit including stripping cleaning crimping with copper lugs heat-shrink sleeves sealing insulation materials , supplying and fixing 6 mm multiwall polycarbonate sheet as shed roofing over energy meter enclosure 1 m length plus 1 m projection with gi supports cutting fixing with screws edge channels , making 4 inch hole in lighthouse entrance gate wall 600 mm thick for cable entry using necessary heavy machinery and tools and refilling as required , add extra charges for executing electrical work at dolphin nose lighthouse in hill area considering difficult terrain limited access higher labor effort and transportation challenges , miscellaneous items including ss screws anchor fasteners nuts and bolts as required gi clamps for cable fixing copper lugs and other necessary materials.

CTN :42965194

08 Dec, 2025 NA

Sangli - Maharashtra

Tender For providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products - supplying materials and testing set of 1)water atm high pressure pump 1 nos 2) membrane 4 nos 3)carbone 25kg 4)sand 25 kg as per scope of work with one year se..