Latest ultrasonic flaw detection machine Tenders | Government ultrasonic flaw detection machine Tenders

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

CTN :45698575

09 Jul, 2026 NA

Ratnagiri - Maharashtra

Tender For supply of detector rod sub assembly (rh)859241006-s,rdso drg.no.rdso/s 10810 , cg drg.no.cpmh-1042/1 ]

Central Government/Public Sector

CTN :45603059

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For set of main gear assembly for irs electric point machine 220 mmthrow as per specification no. irs-s:24-2025 rev-3.details as per annexure- ii. only valid iso-9001 (qms) certified firms to quote. size 3 inch sample piece of the original material of drive rod, lock rod, threaded rod, detector rod, main gear, lock pawl, shaft rack pinion, driving pinion, bush, r.h. helical spring, cover, top/bottom, bracket,ring& metallic liner to be provided for testing as per is:1875, is:2062,is:1865,is:1875,is:3980,is:4454 & is:210.warranty period: upto 30 months from the date of supply.(shop no.06) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45575576

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For detector rod far end for cgl/irs 52 kgs one piece rodding with solid jaw drg no- s&t/by/ f-338/a , material should be as per drg.with m.s. square head pin as per drg no- s&t/by/f-353a. material should confirm irs s5 & s10.party to submit oem / autherization with warranty. sample to be got approved before bulk supply ( for diamension purpose only).(shop no.03) [ warranty period: 30 months after the date of delivery ] ]

CTN :45567249

13 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of integrated smoke and heat detector tester with smoke chamber cleaning features ,containing following accessories -sensor unit-1, battery rod-1, injector-1, mist liquid -1,charger-1, connect rod-4. specifications as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45486644

26 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of detector rod (near end) for cgl/irs 52 kgs one piece rodding with solid jaw drg no- s&t/by/f-339/a , alt-1. material should be as per drg with m.s. square head pin as per drg no- s&t/by/f-353a, material should confirm irs s5-62, class-ii, is- 2004/1991. party to submit oem / authorization & nabl approved lab test certificate with warranty.(shop no.03) [ warranty period: 30 months after the date of delivery ] ]

CTN :45505858

25 Jun, 2026 NA

Koderma - Jharkhand

Tender For supply of pcb fabrication lab , pcb prototyping machine , safety devices on haulage road , shot hole pattern in a sinking shaft , plumbing or shaft centring arrangements for a sinking shaft , shot hole patterns , types of roof support by timber , chock with four corner props , chock release device , tapered props , side and roof support in a roadway , roof bolting , magnetic unlocker for flame safety lamp hand held type permanent magnet , tool kit for servicing and maintenance of flame safety lamp , flame proof lamp fitting for dark room of gas testing , drill rod and drill bit , air leg , lubricator , exploder dgms approved twenty five shot capacity max resistance one hunderd fifty nine ohms, one and half a firing current, non volt battery, dc output five hunderd volt , scraper cum brake detector , stemming rod , metric chain size twenty meter , metric chain size thirty meter , engineering chain , revenue chain , gunter chain , steel tape fifteen meter , steel tape thirty meter , metallic tape,

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

Central Government/Public Sector

CTN :45472793

26 Jun, 2026 NA

Mumbai - Maharashtra

Tender For detector rod long for tws one piece rodding with solid jaw as per drg. no.tws-01 alt-1 material class ii is 2004 : 1991. material should be as per drg.with m.s. square head pin as per drg no- s&t/by/f-353a. party to submit oem / autherization with warranty. sample to be got approved before bulk supply ( for diamension purpose only).(shop no.03) [ warranty period: 30 months after the date of delivery ]]

Ultrasonic Flaw Detection Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector