Latest ultrasonic welding machine Tenders | Government ultrasonic welding machine Tenders

State Government

CTN :45221806

21 May, 2026 21.14 Lacs

Ahmedabad - Gujarat

Tender For emergency work of dismantling, manufacturing, fabrication, supply erection and testing work 2 no`s emergency gate and 2 no`s service gate of r.b.h.r/l.b.h.r with screw rod, intermediate rod, lc rod 5 mt hoist etc. including cost of gas cutting, welding, labours, materials, tools, tackles, scaffolding, transportations, painting etc. as per standard drawing and specification and actual site situation and instruction of engineer in charge for r.b.h.r and l.b.h.r in sani irrigation project dismantling scrap given to the contractor.. (dist: dev bhumi dwarka)

State Government

CTN :45209177

22 May, 2026 43.51 Lacs

Tapi - Gujarat

Tender For dismantling of existing hr service gates and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, motorized hoist and underwater welding, cutting, chipping work in hr well, etc complete including cetc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for jhuj irri. project.

State Government

CTN :45209183

22 May, 2026 48.41 Lacs

Tapi - Gujarat

Tender For dismantling of existing hr emergency gates (2 nos.) and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, underwater repair with welding, cutting, chipping activities in hr well, etc complete including costetc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for jhuj irri. project.

State Government

CTN :45209212

22 May, 2026 42.55 Lacs

Tapi - Gujarat

Tender For dismantling of existing hr service gates (2 nos.) and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, new 12 mt motorized hoists, spiral ladder and underwater welding, cutting, chipping work in hr well, etc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for kelia irri. project

State Government

CTN :45209215

22 May, 2026 48.42 Lacs

Tapi - Gujarat

Tender For dismantling of existing hr emergency gates (2 nos.) and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, new 12 mt motorized hoists, underwater repair with welding, cutting, chipping activities in hr well, etc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for kelia irri. project.

Central Government/Public Sector

CTN :45227006

22 May, 2026 NA

Hubli - Karnataka

Tender For refilling of argon gas grade-iii to is:5760/1998, amendment no.1 of 2008,rev.2 or latest.purity 99.991%, capacity ofeach cylinder is 07 cubic meter, note : 1)refilling is to be done as and when required by consignee in railway owned cylinders.(2) batch wise test certificate of gas shall be provided along with every supply(3) empty cylinders to be collected from sse/welding store/ubls and return dulyfilled with argon gasmake: praxair/inox/mspl/sg or equivalent [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

State Government

CTN :44216446

01 Jun, 2026 NA

Mahisagar - Gujarat

Tender For corrigendum : supply of miscellaneous and consumable items for mmd/ws at khep - v belt d-238, v belt a-28, v belt c-105, rubber spider for love joy coupling size l-095, ci love joy coupling size l-095, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, anabond unadrobic adhesive & sealand no-610, fevi kwik tube 3 grams, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets), belzona super metal, measure tape 5 meter, britelite 1200 meters long rang torch rechargeable led flashlight with charger, impact wrench power/battery operated, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, grease gun, bench vice size 4", bench vice size 8" (netco make), long nose plier, insulated with thick c.a. sleeve,generally confirming to is 3552-1989, product no:1430-6., circlip plier internal (bent nose),product no: 1442.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, combination plier ,185mm lenth, hand drill machine size 10mm, grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, mini angle grinder 100 mm, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36), ag-4 cutting wheel make:bosch, electrically operated portable cut off saw (for tube cutting), wheel size:355mm, arbour size: 25.4mm, scissors size: 10", wire brush with wooden handle size 50x150x300 mm, 3/4" polypropylene rope for normal mechanical work, manila rope, size: 16 mm dia, manila jute rope size 12 mm, ms nipple 1/2", nipple 3/4", nipple 1", ms nipple size 2", hss hacksaw blade size 300x12.5x0.63 mm, hss hacksaw blade size 12"x1/2"x24 tpi bipic, grits 150 emery cloth roll of 50mtr. length and 50mm width, emery paper smooth fine size 38 mm x 50 m length, portable welding machine, gas cutting torch cutogen esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, flash back arrestor for cutting torch end mounted oxygen, flash back arrestor for cutting torch end mounted da, flash back arrestor for regulator mounted da cylinder.

Central Government/Public Sector

CTN :45228023

22 May, 2026 NA

Bokaro - Jharkhand

Tender For welding and gas accessories(12items) comprising of following: 1 - oxygen regulator double stage , 2 - regulator acetylene , double stage , 3 - cuttogen nozzle size: 1/16 inch , 4 - cutting nozzle size: 1/8 inch , 5 - cutogen cutter with nozzle 3/64 inch , 6 - cylinder flash back arrestor (ox ygen) , 7 - cylinder flash back arrestor (acetylene) , 8 - welding cable,50 amps,copper core , 9 - hose red for acetylene, size: 10mm , 10 - hose blue for oxygen, size: 10mm , 11 - handicool holder , 12 - esab leather weld glove, pn.-2001005024 ,

Central Government/Public Sector

CTN :45002289

19 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of manifold system for argon gas supply to tig welding machine

Ultrasonic Welding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors