Latest ultrasonic velocity Tenders | Government ultrasonic velocity Tenders

CTN :40011424

19 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply installation testing and commissioning of hardware equipments for upgradation of control room. - 1). supply & installation of 1080p hd outdoor ir ip bullet camera with 1/2.8 inch cmos pixels 1920 x 1080, sensitivity-0.052 lx (color) 0.008 lux lx (mono) ,ir range 60 mtrs, dynamic range 85 db, true day/night, automatic electronic shutter, video compression h.265 mp (main profile); m-jpeg, white balance, blc, h.265 quad-streaming, motion/tamper/audio detection, privacy mask, motion detection, tamper alarm, auto varifocal lens (zoom / focus) 2.8 mm to 12 mm lens, built-in microphone, edge based video content analysis line crossing, enter /leave field, follow route,loitering,idle / removed object,people counting,crowd density estimation,3d trackingtwo-way, full duplex audio, audio compression aac, g.711, l16 (live and recording), micro sd card support for minimum 512gb card , ip67,ik10 onvif profile s, ce, ul, fcc certified. make : bosch 2). high performance hd video decoder, h.264 and mpeg-4, hd, 4k uhd and mp decoding , capable of flawlessly decoding two 4kp30 streams at 20 mbps, or six 1080p30 streams, or eight 720p60 streams, or twelve 720p30 streams, all at 10 mbps, signal-to-noise ratio > 50, 10/100/1000 base-t auto-sensing half/full duplex rj45, thermal value approx. 51 btu/h, 221 btu/h max, video outputs 2 simultaneously (mini displayport) , ce, ul certified ,operating temperature :-0 c to +50 c (+32 f to +122 f) ambient temperature make bosch 3). supply & installation of 32 channel nvr supporting 16 ip channels with high incoming bandwidthwith simultaneous record and view, camera ip support, latest video compression technology supporting supports h.264 and h.265 video compression technology with real time live display. make bosch 4). supply & installation of workstation with intel i7 processor, 4gb ram, 2tb hdd, 2 gb dedicated nvidia graphics card, windows 7 recommended by vms software. the workstation shall be suitable for any open platform software, as required as per specification & at site of work inline with the engineer in charge instructions including all licences and softwares of bosch. make: hp 5). supply & installation of 3 core power cable 1.5 sqmm. 6). supply & installation of cat 6 utp cable. 7). supply & installation of 3 feet patch cord. 8). supply & installation of 7 feet patch cord. 9). supply & installation of pvc conduit pipe, 25mm medium, isi mark with complete accessories isi medium 10). integration of already installed bosch cctv system with existing system 11). supply & installation of 55" led monitor, full hd, hdmi port, component video inputs, 1 digital audio out with necessary softwares. 12). supply & programming of analytic softwares for using machine learning algorithms to detect programmed, instance-specific triggers based on motion, lighting changes, colour or artificial intelligence 13). supply & installation of 24 port managed stackable poe+ switch, oem suppport. cisco 14). supply & installation of video processor consisting of 1x dvi, 1x hdmi, x vga, 1 x composite video, 1 x sdi/hd-sdi inputs, full hd resolution, 2 x dvi, 1 x vga outputs, panel/knob, rs232 control, 100~240vac power, 5~40 deg c operating temperature, switching: seamless switching, fade in fade out switching & blend switching 15). supply and installation of bezel less direct view true color led wall inclusive of led controller cum processor, media player, power distribution unit, mounting structure for led with size 10 ft x 5.6 ft, pixel pitch 1.58 mm, led type 3-in-1 smd, brightness 800cd/ m pixel density 396,550pixels /m, pixels per panel 384x216pixels, module size 152.48mm171.54mm, panel size 609.92mm343.08mm68mm, weight 7kg/panel, maintenance front, ingress protection rear ip60, curve 0~+7concave), panel diagonal 27.5'', aspect ratio 16:9, panel area 0.209 m,planeness 0.15mm, environment indoor, material die-cast aluminum, calibration support brightness and ch

CTN :40007598

28 Apr, 2025 NA

Ranchi - Jharkhand

Tender For bids are invited for supply of various goods as per list for urban health and wellness centers of rmc-, , , tray instrument/dressing with cover 310 x 195x63mm ss, ref is: 3993 , flashlight torch box-type pre-focused (4 cell) , torch (ordinary) , dressing drum with cover 0.945 litres stainless steel , digital hb meter , weighing scale, adult 125 kg/280 lb , weighing scale, infant (10 kg) , sterilizer , surgical scissors straight 140 mm, ss , kelly's haemostat forceps straight 140 mm ss , vulsellum uterine forceps curved 25.5 cm , cusco's/graves speculum vaginal bi-valve medium , sims retractor/depressor , sims speculum vaginal double ended iss medium , cheatle's forceps , vaccine carrier , ice pack box , sponge holder , plain forceps , tooth forceps , needle holder , suture needle straight-10 , suture needle curved , kidney tray , artery forceps, straight, 160mm stainless steel , dressing forceps (spring type), 160 mm, stainless steel , cord cutting scissors, blunt, curved on flat, 160 mm ss , clinical thermometer oral & rectal , stethoscope , foetoscope , hub cutter and needle destroyer , suction machine - fleetric, oxygen administration equipment , tracking bag and tickler box (immunization) , measuring tape , i/v stand , artery forceps-curved , bp apparatus (digital) , dental probe , digital thermometer , examination lamp , tongue depressor , weighing scale adult (digital) , oxygen cylinder with trolley , mouth gag , mouth mirro , snellen vision chart , near vision chart , stadiometer , nebulizer , gauze cutting scissors straight , kits for testing residual chlorine in drinking water , tuning fork , examination table with mattress, , syringe (10 cc, 5 cc, 2 cc) and ad syringes (0.5 ml and 0.1 ml) , for immunization , disposable gloves , dry cell/battery , disposable lancet (pricking needles) , disposable sterile swabs , routine immunization monitoring chart , blank immunization cards/joint mch card (one per pregnant mother) and tally sheets (one per immunization session) , iv canula and intravenous set , interdental cleaning aids , chlorine tablets , salt lodine test kit , mackintosh sheets - 5 metres , wooden spatula , suture material , online ups 1 kva with 60 minute backup , fire extinguisher , buckets big (plastic) , buckets small (plastic), , dustbin yellow (human & anatomical waste) , dustbin yellow (cytotoxic drugs or contaminated with cytotoxic drugs) , dustbin red (tubing, catheter, iv set, bottles) , puncture proof container blue (broken glass, ampule) , puncture proof container white translucent (metal sharp, syringe and needle) , yellow disposable bags , red disposable bags , hand towels , bed sheet for examination tables , cleaning material, detergent , insecticide treated nets , iii. furniture and fixtures , name of items , chairs for patient waiting area , foot step , office chair , office table , screen separators with stand , steel almirah/cupboard/storage chests , stool for attendants , racks for medicine storage-2 to 3 per faclity, , glucometer , glucometer testing strips , hemoglobin meter , hemoglobin strip , slide drying rack , specimen collection bottle , test tube rack , test tubes , glass slide box of 25 slides , rapid pregnancy testing kit , rapid test kit for dengue and malaria , n/10 hydrochloric acid , reagents such as hydrochloric acid, acetic acid, benedict's solution, bleaching powder, hypochlorite solution, methylated spirit etc. , dipsticks for urine test for protein and sugar (1 container of 25 strips) , whole blood finger prick hiv rapid test and sti screening test each

CTN :39993528

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate ,

CTN :39964740

29 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For supply of excavating over areas exc 1 point 5 m deep and , excavating over areas exc 1 point 5 m deep , ml for moorum red bajri filling in , ml for hard core of broken stone and , ml for cement concrete type d , ml for rcc m25 as in foundations , ml for rcc m25 as beams cantilevers , ml for rcc m30 as in foundations incl , ml for rcc m30 walls , ml for rcc m25 as in columns pillars piers , m l for tmt bars 10 mm dia , ml for formwork to sides of concrete , ml for formwork to faces of walls , ml for formwork to sides of pillars , ml for formwork to sides and , ml brick work with sub class brick , ml for damp proof course to h , m l for rendering 10 mm thick on fair faces o , m l for rendering 15mm thick on fair faces of , m l for preparation of new wall surfaces and , preperation of new plastered surfaces a , ml for 75 mm thick pcc , sf gl frame work for seamless ceiling , ml for hangers 6 mm dia , ml for providing and fixing , sf roof trusses framed , sf plates plain or chequered , ml for mild steel screw bolts , sf prepainted galvalume aluminum z , sf prepainted galvalume aluminum , m l for applying two coats of synthetic , ml for steel rolling shutters with out ball , removing excavated material n exc 50m and , ml for framed work as in doors or gates of a , sf wire netting of galvanised steel wire , sg gate valve 50 mm dia , sf 50 mm dia tubes med grade , material and labour for point , one 3 pin socket outlet 5 amps on , one 3 pin socket outlet 5 amps , material and labour for point wiring , material and labour for switch piano , material and labour for socket outlet , all as per serial item no 11 here in , material and labour for ceiling rose , supply and fix led flood light 35 36 37 w , supply and fixing sheet metal enclosure , supply and fixing mcb single pole 6 to 3 , supply and fixing mcb spn 50 to 63 am , material and labour for earthing , supply fix air circulator fans 230v , m l for bore well of depth 60 mtr , supply installation testing and , supply and fix foot valve , supply and fix sluice valves of 40 mm bore , supply laying and testing , double scull 2x , quadruple scull 4x equipment to , scull oars equipment to be , sweep oars equipment to , speed coach , heart rate watch , display led screen 10x8 , digital camera , mirror with aluminum frame with , stop watch , wall fan heavy duty , indoor rowing machine equipment , single scull 1x equipment to be bid details/ 2 / 53

Co-operative

CTN :39935983

14 Apr, 2025 NA

Pune - Maharashtra

Tender For group a:- (overhauling, servicing, repairs & job works) 1) roller reshelling & grooving 2) ksb & psp/magma pump 3) thermax esp 4) mill carrier chain 5) ultrasonic & dp testing 6) mill hydraulic accumulator testing 7) boiler jet cleaning 8) hydralic trippler table 9) abb & danfoss vfd panel 10) grandfoss pump 11) oil centrifuge machine 12) 18 mw siemens turbine 13) kpt blower 14) mill hydralic cap 15) top gear& kavistu 16) paltech make cooling tower 17) c/fbasket 18) mill drive planetary gear box. 19) dosing pump group b:- (supply, of material & spares) 1) knives & hammer 2) supply& erection of b/w mill cane chopper 3) supply& erection of new vapour line juice heater 4) supply of cane leveller motor asr & incomer panel 5) supply & commisssioning new avr panel 6) welding material 7) trash & scraper plate.

Central Government And Public Sector

CTN :39967231

12 May, 2025 NA

Cachar - Assam

Tender For supply, foundation, installation, testing, commissioning & proving out of automatic coach wa shing plant as per specification no. cofmow/ir/acwp/bg/2019, along with concomitant accessories includi ng any other accessory for making the machine fully functional and preventive maintenance inclusive of spa res, material and labour cost during 1st & 2nd year of warranty period. [ warranty period: 24 months aft er the date of delivery ]

CTN :39907875

22 Apr, 2025 NA

Jammu - Jammu And Kashmir

Tender For rate contract for supply of allied material for reclamationrepairre-build of damaged distribution xmers of various capacities ranging from 25kva to 630 kva in ediii jpdcl for the fy 2025-26 or till next tender is finalized - lt bush rods of brass (m-12), lt bush rods of brass (m-20), lt bush rods of brass (m-30) l.v. bush rods of brass m-30/m-40, ht bush rods of brass (11 kv), lv brass bush rods 12mm ( in exchange of burnt/ damaged one), lv brass bush rods 20mm ( in exchange of burnt/ damaged one), lv brass bush rods 30/40mm ( in exchange of burnt/ damaged one), hv brass bush rods (11kv) ( in exchange of burnt/ damaged one), lv bushings (12mm), lv bushings (20mm), lv bushings (32/30 mm) , ht bushing (11 kv), film paper, lethoride paper/khakhi paper, press boards, gutties, rubber washer of different sizes, ht washers, lt washers m-12, lt washers m-20, lt washers m-30/m-40, cork sheets (1000mmx500mmx5mm), rubberized cork strip(40mmx5mm), bakelite tubes, cotton tape, nawar tape, m.seal, glass sleeves, insulation gum, wooden wedges, craft paper, packing sheets, aluminum gutka, nuts & bolts, h.t. bush clamps, copper brazing rod, aluminum brazing rod, h.t / l.t oil seals-12, h.t / l.t oil seals-20, h.t / l.t oil seals-30/40, cotton waste (old cotton sarres/cloth), m.s washers for l.t connections, plugs of different sizes 1 1 , flux, grey paint, turpentine oil, varnish, welding rods (8mm & 10mm), oven heating/elements coils, 3 multi stands cu cable (10 mm ), thinner, crepe tape, oxygen cylinder (refill), megger (500volt, 5000 mw), oxygen regulator, oxygen cylinder nozzle, oxygen pipe for gas cutter, clamp for oxygen pipe, c clamp 18 , hydraulic transformer lifting trolley, trolley for scrap loading/unloading, clamp meter, welding helmet, welding cable with holder, cutter pliers, screw driver (all sorts), ratchet wrench with socket set compete, pipe wrench 12 , pipe wrench 18 , bolt cutter 12 , bolt cutter 18 , spanner 15/21 mm, spanner 38/48 mm, oven thermostat (0-300 amp), contractor 63 amp isi ,10ka of reputed make, cable wire 16 mm., filter plant high pressure supply hose 25 mm (1 ), 35 bar/500 psi, filter tank pipe rubber, wooden frames for winding of ht /lt, exhaust fans for workshop 24 heavy duties, pedestal fans for workshop (heavy duty), out side clipper for winding machines, inside clipper for winding machines, heavy duty drill machine (1050 watt), scissors (large size for cutting papers), test cell of oil testing machine (60kv) (500 ml/ acrylic test cell) with removable & adjustable electrodes, ht/lt winding machines bearing, ht/lt winding machines bearing vee-belts, ht/lt winding machines bearing gear-box, ht/lt winding machines bearing foot-switch, ht/lt winding machines bearing counters, 1 hp pump motor centrifugal, change over switch 400 amp, mccb 4 pole 100 amp(25ka), scale steel 1 meter, scale steel 12 inch, eot crane switch, angle grinder (850 watts), air blower macine (900 watts), digital micrometer 0 to 25 mm, lpg 19 kg (refill), laminated core of all sorts, multi stand 3 core copper cable 10 sqmm, testing clips, saw dust, dust sand, led light street light150 watt(ip67), led light flood light200 watt(ip67), steel sand buckets, fire extinguisher mechanical foam 50 ltr, fire extinguisher (refill) 50 ltr, oven blower 1450 rpm, twin core 16 sqmm cable (copper), twin core 16 sqmm cable (aluminium)

CTN :39795810

22 Apr, 2025 13.00 Lacs

Bhopal - Madhya Pradesh

Tender For rate contract for electrical material supply and repair for 01 year rate contract for electrical material supply and repair for 01 year - item for annual supply, cooler fiber (medium size), cooler metal (medium size), jumbo cooler, wall fan (400 mm sweep), pedestal fan, ceiling fan (1200 mm sweep), cable 3 core 2.5 sq. mm (90 mtr), 3 pin top 16 amp. (modular), switch 6 amp. (modular), socket 6 amp. (modular), china clip (packet), electric tape, exhaust fan 12" (metal), exhaust fan 9" (metal), exhaust fan 9" (plastic), wire 1.5 mm (isi) (90 mtr), pvc pipe 1.5 mm 1", pvc bend 1", pvc junction box 1", shaddle 25 mm, tube light led 20 watt, 6 module plate (modular), 8 module plate (modular), 6 module pvc box (modular), 8 module pvc box (modular), tpn 63 amp., mccb (200 amp), mcb sp (5-32 amp), 2x2 panel light (30 watt), switch 16 amp. (modular), socket 16 amp. (modular), telephone beetal n-88, telephone beetal c-51, wall fan motor rewinding, ceiling fan motor rewinding, exhaust fan motor rewinding, call bell wireless (electric), cat-6 cable, led bulb 9 watt, led light down lighter 5"x5" square, led light down 8"x8" square, led light down 12"x12" square, led light panel repair (dots & driver) 2x2 square, split ac service (1.5 ton), split ac gas recharge full (1.5 ton), split ac gas top up (1.5 ton), split ac nitrogen testing (1.5 ton), split ac condenser coil (copper) change with gas (1.5 ton), split ac compressor replacement (1.5 ton), split ac running capacitor, split ac 2 ton (inverter 5star) supply & installation, split ac 1.5 ton (inverter 5 star) supply & installation, ac copper pipe (3/8" and 5/8"), dg set servicing- 320 kva (only from mahindra s authorized dealer), transformer servicing- 315 kva, 33/11/0.433 kv substation maintenance (painting, do fuse, jumper, nut bolt, all necessory item), motor repair (5 hp), discharge rod, safety helmet, hand gloves (11 kv), safety shoes, foldable ladder aluminium (6 steps), cutting plyer, screw driver, tester, rinch set (5cm - 22cm), hammer drill machine, clamp meter, ups (600va), epabx card replace, epabx card repair, sofa & chair cleaning (per seat ), extension board (for computer)

Ultrasonic Velocity Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government And Public Sector