Latest ultrasound table Tenders | Government ultrasound table Tenders

Central Government/Public Sector

CTN :45448250

26 Jun, 2026 96.00 Lacs

Cuttack - Odisha

Tender For tender for supply of seed bed preparation and sowing of rice nursery arrangement of seed samples for sowing in the nursery bed (up to 50) (detailed work mentioned in tender paper) , seed bed preparation and sowing of rice nursery arrangement of seed samples for sowing in the nursery bed (more than 50) (detailed work mentioned in tender paper) , field bund raising and side trimming of various width and height (both sides) , making bunds between sub-plot treatments and putting of plastic sheets/films for creation of barriers to prevent flow of water , fertilizer etc. , field leveling/laddering (after ploughing/puddling by using farm bullocks/hand levelling) , pot preparation (collection of soils , filling of pots up to 3/4th depth) of different sizes , preparation of tray (soil filling) and seed sowing transportation (tray size 30x18x15 inch) , preparation of pro-tray , sowing (96 well) and transportation of the tray for anaerobic germination fe zn deficiency screening at seedling stage evaluation , seedling , uprooting and line transplanting of rice 10 c.m. x 15 c.m. (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding) , seedling , uprooting and line transplanting of rice (upto 4 varieties)(uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding) , seedling , uprooting and line transplanting (experimental plots) transplanting of rice in experimental plots where numbers of varieties to be transplanted 5 to 100 varieties breeding lines accessions in one plot (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding). distance of planting is to be maintained as per the direction of the indenter. , seedling , uprooting and line transplanting (experimental plots) transplanting of rice in experimental plots where numbers of varieties to be transplanted of more than 100 varieties breeding lines accessions in one plot (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings/hill including rope holding). distance of planting is to be maintained as per the direction of the indenter. , direct sowing by seed drill in dry soil (both rice and non rice crops like green gram , black gram , soybean , cowpea , maize etc.) , line sowing with 3-5 seed/hill including rope holding (15c.m. x 20 cm) (upto 50 varieties/ breeding lines/ accessions) , line sowing with 3-5 seed/hill including rope holding (upto 100 varieties/ breeding lines/ accessions) , gap filling in transplanted plot/ resowing in the gap /thinning in experimental field of dsr plot , hand weeding in transplanted rice (once) , mechanical weeding with cono wedder (once) , weeding dsr/transplanted rice (twice i.e. 20 and 40 days after weeding) , weeding in non rice crops , cleaning and maintenance of irrigation and drainage channels , intercultural operation (soil loosening between rows , ridge formation etc.) in non-rice crops like groundnut and maize etc. , fertilizer application (once) , application of pesticides/ herbicide (broadcasting) in the experimental plots / farm field with proper personal protective equipment etiquettes to be provided by office , spraying of pesticides/ herbicide in the experimental plots / farm field (with proper personal protective equipment etiquettes to be provided by office) , irrigation (once) of experimental/ seed production plots (wherever irrigation pipe is required) , irrigation (once) of experimental seed production demonstration plots of 20m x 5m size , rice harvesting (manual) , bundling and carrying to the threshing

State Government

CTN :45434617

10 Jun, 2026 24.05 Lacs

South Tripura - Tripura

Tender For fdr/running maintenance/augmentation of rws/arws/jjm schemes under dws division sabroom / sh: operation, maintenance and upkeep of 0.15 mgd swtp at manubazar including renovation of rapid gravity filter bed with astm piping and filter media, repair/rewinding of pump-motor sets, providing electrical and mechanical accessories, fitting/fixing of sluice valves & nrvs, cleaning of reservoir and filter units and supply of water treatment chemicals such as alum, lime, bleaching powder and chlorine salt for ensuring uninterrupted drinking water supply for 01(one) year.

CTN :45430527

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of medical equipments in various locations in distt. patiala (as per detail attached) - supply, ot table, hydraulic operated with smooth gear mechanism, double cylinder loak proof, stainless steel, medical refrigerator 250-300 ltr. with shelf temperature setting (approx) +0 to +8 c, voltage 220 - 240 v, freguency 50/60 hz, ot light ceiling mounted single dome 12 led with led 50000 lux 22" dia dome with 4 reflector of 8 dia. auto spring balanced, heavy duty step down transformer. sterilizable central handle., ecg machines 12 leads single print 10-hour standby time, continuous print more than 3-hour, auto-analysis and auto-diagnosis for routine ecg parameters, built-in large capacity memory, casseta 14*x17* for pre-installed dr system for xray at mkh patiala make agfa, semi auto analyzer with built in software for the calculation and curve plotting. light source led, open system capable using all grand reagents and all the test programs should be in open mode. user interface: lcd display with touch key board, flow cell type permanent flow cell. memory >= 500 tests, in-built thermal printer, in-built thermal printer required, accessories to be supplied 1. micro pipettes (* no.) - 2 variable (5-50), (100-1000), small tips 500 nos. & large tips- 500 number, laproscopic surgical instrument set, ups 1kva offline for ultrasound machine simulated sine wave or better voltage avr mode 200-245v voltage battery mode 230vac +10%e frequency (htz) on battery 50/60hz + 0.1hz, 30 min backup, iso 14001/bis certification, biphasic defibrillator monitor 8.4" inch size screen, charging time of less than 9 seconds for maximum energy of 2 to 360 joule, synchronized & asynchronized cardio-version and having in-built thermal printer, monitoring 12 lead ecg, heart rate, spo2, & nibp, 230v, 50hz ac mains and battery capable of delivering up to 50 shocks at 200 joule, iso /en 60601-1, certified, oem warranty 3 year, boyles apparatus, 4 cyl mechanical with 3 gas system with hypoxic guard with 2 vaporizer (halothane & isoflurane), ice lined refrigerator (ilr) 144 lt 220 volt 50 hertz, in build stabilzer led (3-digit digital display), galvanized steel, stem alchol thermometer, ground clearance (min) 100 millimeter, holdover time (in a continuous external temperature of +43 degree celsius -24 hour, sets of instruments used for laparoscopy surgerya. gull bladder extractor, b. call stone spoon extractor c. 10 mm safety trocar, d. aspiration needlee. 5mm and 10 mm reducers, metallic continuous spray pump 1.5 ltr. (ganesh pump) type: hand compressor sprayer, tank: brass. tank capacity: 1.5 lit. pump barrel brass, working pressure, 40 - 45 psi, baby warmer steel tubular structure pretreated and powder coated heater rotation +90, bed tilt should be 615 , led displays, aulomatically cut off at 38 degree celsius, probe accuracy specilication: +0.1 c @ 30 c to 42 c, 200 to 240vac 50 hz supply

CTN :45022049

12 May, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system.• survey, investigation, design and construction of various diversion drains of inner size 0.50m(w) x 0.50m(h) for a length of 10m, 1.00m(w) x 1.20m(h) for a length of 10m and 1.00m(w) x 1.00m(h) for a length of 210m• survey, investigation, design and construction of coarse, medium screen, grit chambers of various sizes as detailed in scope of work for each wet well.• design and construction of 3 no. wet wells with overhead pump house as per the technical specification• survey, investigation, design, supply, laying, jointing and construction of rising main (di-k9 pipe) of inner dia. 150 mm for a length of 950m and dia. 100 mm for a length of 100m• stp (2 nos) - designing (aesthetically), providing, and constructing and giving satisfactory trials of sewage treatment plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment, etc. as per the technical specification of capacity 0.50 mld of facultative aeration lagoon convensional technology including allied units for waste disposal with all civil and mechanical, electrical works involved including administration cum laboratory building of minimum carpet area of 800 sqft. complete with all electrical works.• design and construction of planted drying bed for co-treatment of faecal sludge - 4 nos. of size l- 5.00 x w- 2.00 x height as per design + free board 0.30)• boundary wall around entire stp area, internal and external electrification.• operation and maintenance (o&m) for the proposed works / entire sewerage system (proposed) for a period of 5 years after successful completion of trial run period or handing over whichever is later.

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45073459

30 May, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : dismantling, erection and testing of bed evaporator tubes, bed super heater coils and their clamps in power boiler4 at energy mechanical in tnpl unit i

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45206080

29 May, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous mechanical maintenance works in nas plant, filter bed and offsite area

State Government

CTN :45218271

20 May, 2026 4.11 Lacs

Hyderabad - Telangana

Tender For providing of electrical works (electrical installations), networking chamber for accommodation of chief general manager(engg), establishment staff of rajendra nagar zone-5 at miralam filter bed campus under electrical and mechanical section under hyderguda ward, rajendranagar zonal office of division ix, rajendra nagar zone.

corporations/Associations/Others

CTN :45216289

18 May, 2026 NA

Kalaburgi - Karnataka

Tender For auction sale of ms scrap w/w/o aluminum attachments,scrap seat frames and legs and luggage carriers,scrap auto items grade-1,scrap auto items grade 2,scrap auto electrical items,scrap spring steel blades all size,scrap rubber items consisting,scrap tread rubber powder and pieces,scrap clutch plates /clutch disc (ll/tt/eicher- round & fan type),scrap gear box bell housing,scrap clutch covers assemblies/ pressure plate ll/tt/eicher),scrap brake drums,scrap paint drum 4/5 ltr capacity,scrap tubes full round with / without neck,scrap flaps full round with cut,scrap single/two/three seater cusion with rexine,scrap paints and thinner drums & bvc tin 20/25/30 ltr capacity,scrap fip noszzles ,elements , automiser body and spares,scrap sleeper bed cuashion w/w/o rexine,scrap turbo charger assy with exhaust manifold,scrap slack adjuster tata/al rh/lh (w/w/o gear),scrap vane pump tata / ll/ eicher/midi,scrap pressure plate back plate tt/ll,scrap power steering box assy. tt/ll,scrap rear cj shaft w/w/o cross bearing tt/ll,scrap diesel tank 240/250/ 165/180 ltr capacity,scrap pvc/polythene scrap generated at trp,scrap mechanical /hydralic jacks,scrap broken head light assy,scrap wheel disk without ring,scrap curing envelops & bag,scrap e.t.m small pipe,scrap wiper motor,scrap fly wheel,scrap shock absorber,scrap pvc coolant reserve tank,scrap fire extinguisher 1/2/4/6/9 kg

Ultrasound Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

corporations/Associations/Others