Latest ultraviolet lamp Tenders | Government ultraviolet lamp Tenders

CTN :45443511

19 Jun, 2026 33

Anekal - Karnataka

Tender For operation maintenance and repair of high mast lighting systems including panel cable winch and led fixtures and street light purchase for hennagara gram panchayat fy 2026 27

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45428050

18 Jun, 2026 10.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates for motor pump repairing and electric material supply - inviting rates for motor pump repairing and electric material supply, thrust bering 20 hp, rotor sleep steel 35 hp, rotor sleep steel 30 hp, housing bush bearing12.50 hp, housing bush bearing10 hp, housing bush bearing5 hp, housing bush rubber10 hp, housing bush rubber 5 hp, rotor shaft repairing20 hp, rotor shaft repairing12.50 hp, rotor shaft repairing10 hp, rotor shaft repairing6 hp, rotor shaft repairing5 hp, ampler brass 100 hp, ampler brass 20 hp, ampler stainless steel 20 hp, relay 5 hp, starter panel board 7.5 hp, turbine section saft 25hp, turbine brass bush (gm)25hp, tubelight rod 4 feet (40 watt), cutout 100 ampere, main switch 100 amp, main switch 200 amp with side handle hrc fuse, main switch 400 amp with side handle hrc fuse, flood lighting series 1 200 watt, power saver fixture 4 24 watt, power saver fixture 2 24 watt, l.e.d. 50 watt flood light complete isi/iso certified with warranty, l.e.d. 90 watt flood light complete isi/iso certified with warranty, l.e.d. 100 watt flood light complete isi/iso certified with warranty, a.c. aluminium wire 12 sqm m.m 300 feet, 2 feet 24 watt tube rode, multi copper wire 0.75 sqm.m., multi copper wire 8 sqm.m., multi copper wire 10 sqm.m., led bulb 40 watt isi certified compny with warranty, armoured cable 25sqm.m. (lead) 4 core aluminium, lt cable 35 sqm.m. (lead) 4 core aluminium, ltcable 50 sqm.m. (lead) 4 core aluminium, lt cable 50 sqm.m. (lead)5 core aluminium, exhaust fan 9 inch, exhaust fan 12 inch, 2 core cable 4 sqmaluminium coil, 2*24 energy saver rod for street light, fixture 2*36, fixture 4*36, clamp 1*1", clamp 1"1.5", clamp 2*2", bettary 100 amh tubelar, bettary 120 amh tubelar, bettary 150 amh tubelar, bettary 180 amh tubelar, garden decorative lamp post with light pvc 8 inch, garden decorative lamp post with light pvc 12inch, garden decorative lamp post with light pvc 14 inch, garden decorative lamp post with light metal 12inch, garden decorative lamp post with light metal 14 inch, multi colour changing 4 way outdoor exterior wall light metal body for garden, led acrylic sign board complete frame with fitting labour charge, junction box pvc 25 mm one way, junction box pvc 25 mm two way, junction box pvc 25 mm three way, junction box pvc 25 mm four way, junction box pvc32 mm one way, junction box pvc 32 mm two way, junction box pvc 32 mm three way, junction box pvc 25 mm four way, junction box pvc 18 mm one way, junction box pvc 18 mm two way, junction box pvc 18 mm three way, junction box pvc 18 mm four way, stabliser automatic, stabliser autocut, rgb switcher with power supply complete fitting, autocut timer panel 63 amp, autocut timer panel 100 amp, autocut timer panel 400 amp

CTN :45419096

13 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 4p 160a mccb , 4p 250a mccb , sitc of new dpt mcc main panel , shifting fixing of new dpt m , sitc of fp 200 mm junction box , flp wp lighting distribution , shifting fixing of flp light , sitc of flp 63a 5p plug sock , sitc of on off flp push butto , supply of flameproof 90w led , supply of 60w 230v ac led f , installation of 60 90w led w , sitc of galvanized gi perforat , sitc of 100 x 50 x 2mm hot dip , supply laying of 450 x 75 x , supply fabrication erection , providing pipe electrode type , sitc of 50 x 6mm hot dip galva , sitc of 25 x 3mm hot dip galva , supply and laying of 4 sqmm co , supply and laying of 16 sqmm c , supply laying of 16 sqmm cab , supply of 3c x 2.5 sqmm ug arm , supply of 5c x 2.5 sqmm ug arm , supply of 4c x 6 sqmm ug armou , supply of 3.5 core x 185 sqmm , supply of 4 core x 95 sqmm frl , supply of 4 core x 50 sqmm frl , sitc of 3c x 2.5 sqmm ug armou , sitc of 5c x 2.5 sqmm ug armou , shifting laying of 4c x 6 sq , shifting laying of 3.5c x 18 , shifting laying of 4c x 95 s , shifting laying of 4c x 50 s , supply of flame proof flp dc g , supply of flame proof flp dc , glanding termination of flp , glanding termination flp dc , supply fixing of flameproof , supply fixing of heavy duty , skilled electrician provided f , excavation , breaking of pcc , breaking of rcc , pcc m 20 , rcc m 20 , reinforcement steel

State Government

CTN :45442256

15 Jun, 2026 NA

Dumka - Jharkhand

Tender For supplying and laying of 70 sq.mm x 3.5 core xlpe aluminum armored 1.1 kv grade cable, s/f of 90 watt led street/flood lighting luminaire, supplying and fitting of 125 mm dia. flange type c.i. foot valve at clear water p/plant nawadih and repairing o - supplying and laying of 70 sq.mm x 3.5 core xlpe aluminum armored 1.1 kv grade cable, s/f of 90 watt led street/flood lighting luminaire, supplying and fitting of 125 mm dia. flange type c.i. foot valve at clear water p/plant nawadih and repairing of 100 kva oil cooled servo voltage stabilizer, repairing and overhauling of 50 hp 09 stage bowl assembly vt pump having head 78 meter, discharge- 96 m3/hr., s/f of 90 watt led street/flood lighting luminaire, special repairing of 200 amp. motor control panel with fasd starter, supplying of triple spur gear type chain pulley block etc. and allied work at raw water p/plant baskichwak of asansol group of village rural pipe water supply scheme under d.w. &s. mech. division dumka.

Central Government And Public Sector

CTN :45436763

23 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of electrical panel enclosure - 2200 (h) x 1200 (w) x 800(d) with following description: 1. size: 2200 height x 1200 width x 800mm depth of double door. 2. material: crca (cold rolled close annealed) sheet steel. 3. structure: 2mm thickness (14 swg) for panel structure and 1.6mm (16 swg) for doors and covers. 4. base frame: a 200mm high channel base for mounting and cable entry. 5. paint finish: epoxy powder-coated with 7- or 10-tank pretreatment for corrosion resistance, typically ral 7032 (siemens grey) orral 7035 (light grey). 6. doors: front and rear doors with stiffeners, neoprene/pu foam gaskets (for sealing), and lift-off hinges with key-lockable handles. 7. ventilation: louvered ventilation slots with air filters. 8. protection: ip65/ip66 (dust-tight and water-resistant for harsh environments). 9. mounting plates: zinc-plated or painted mounting plates for mounting plc racks, smps, and relays. 10. gland plate: 3mm thick detachable gland plates for bottom or top cable entry. 11. earthing: copper earthing busbar (25x5mm) at the bottom, with copper braided straps to connect all doors and side panels. 12. lighting/power: internal led lighting with limit switch and 230vac 5 pin socket. 13. document holder: a pocket attached to the inside door. [ warranty period: 12 months after the date of delivery ] ]

CTN :45296154

09 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

State Government

CTN :45413511

10 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay set lt i.e. d

State Government

CTN :45417310

15 Jun, 2026 31.13 Lacs

West Tripura - Tripura

Tender For construction of 08 nos of new residential qtrs for judicial officers of various grade at bishramganj sh installation of inverters post top yard lighting and power input to main panel including internal electrification of 2 nos security room

CTN :45400206

11 Jun, 2026 19.60 Lacs

Jhalawar - Rajasthan

Tender For establishment of smart/hybrid classroom including supply, installation,testing and commissioning on turnkey basis -0 75" inch interactive flat panel display with inbuilt android, ops support and wall mount , digital teaching podium with inbuilt pc desktop, touch panel control and integration ports , 5 kva online ups with battery backup for complete smart class system , ptz camera vc grade with mounting accessories (for hybride teaching and vc) , full hd visualizer (doit compliant) for content sharing , dsp based hybrid classroom audio system including mixer, amplifier and processing , wallmount speakers (classroom coverage type) , wireless microphone system including handheld + lapel mic set , student chair with writing pad (powder coated fram, cushioned seat) , table (teacher) front teaching and control use , split air conditioner 2 ton (for conference load smart classroom) , high back chair (teacher) , sitc including smart led lighting, lan networking, electrical points, painting, spc wooden flooring, blackout curtains, teaching platform laminate finishing, camera mounting, installation hardware and connectors complete job

Ultraviolet Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

State Government