Tender For supply of mechanical engg lab equipments - temperature transducer kit, pressure transducer kit, flow sensor kit, thennistor, strain gauge kit, stepper motor control, trainer, hydraulic motor trainer, cut sections of pumps,, actuators, valves and, accessories used in, hydraulic systems, working models of pumps., actuators, valves and, accessories used in, hydraulic systems, working models of pumps,, actuators, valves and, accessories used in, pneumatic systems, output devices, thermal actuators, magnetic actuators, open and closed loop, control system kit, first and second order, control system, process control system, with feed forward path kit, ero, rs485 110 module, ethernet 1/0 module, hybrid & electric vehicle, trainers' s,l:'stem, fuel cell trainer kits, electric vehicle, automotive drives, ev stem kits, wire cutter, wire stripper,, screw driver, wtres,, multimeter, battery,, automotive electrical, component set-up, voltage, tester, edm, ecm, injection moulding, machine, , seam welding machine, slope and deflection of, beam apparatus, extension and, compression of springs, apparatus, shear tool assembly, electronic hook weighing, machine, electronic weighing, machine, thermometer and, pressure gauges of, different types, indicator unit, heat pump, gas power plant trainer, hydroelectric power plant, trainer, set-up for belt friction, apparatus, universal governor's, apparatus
Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low volt age bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 20 0 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by su pplier along with supply of material: (i) type test report of transformer having same rating, make (& mode l if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:11 80 (part 1) latest. supply of outdoor type , plinth mounted, distribution transformer, minimum energy effici ency level 3 of rating 500kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star ( vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment n os. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) late st with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicato rs will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low volta ge side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltagefrom +5% to -10% in steps of 2.5%. following has to be submitted by s upplier along with supply of material: (i) type test report of transformer having same rating, make (& mod el if any) and design from nablaccredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates a s per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1 180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]
Tender For a.m.c. of instrument and spares - a.m.c. of instrument & spares, amc for boiler no. 1, 2 & 3 of drum level control system with, calibration, repairing, r-commissioning, with steam flow meter & alarm system etc., amc for boiler no. 1, 2 & 3 temperature monitor system, calibration, repairing, r-commissioning,, amc for power turbine of bearing digital temperature monitor system, calibration, repairing, r-commissioning,, amc for d- super heater exhausting line of automatic temperature calibration, repairing, r-commissioning,, amc for centrifugal machine automatic super header control system with, calibration, repairing, r-commissioning, amc for sulphar furness no. 1,2 & 3 of temperature indicator, calibration, repairing, r-commissioning,, amc for raw juice, sulphided juice, injection water & exhaust system temperature monitor system, calibration, repairing, r-commissioning
Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech
Tender For supply of procurement of hot air oven with digital temperature indicator as per enclosed annexure. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : tender for replacement of winding temperature indicator and oil temperature indicator three sets and nine siemens make contactors in the buchholz relay circuit of three generating unit transformers, along with complete repair and restoration of the p