Latest underground drain repair Tenders | Government underground drain repair Tenders

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

corporations/Associations/Others

CTN :45699104

02 Jul, 2026 26.59 Lacs

Chandigarh - Chandigarh

Tender For strengthening of storm water drainage network by providing and laying of 300mm 12inch id rcc np 2 pipe line alongwith construction of new road gullies and machine holes in back service lane at various locations from sec-7 to 11 chd ch to capital head

corporations/Associations/Others

CTN :45695676

03 Jul, 2026 9.44 Lacs

Delhi - Delhi

Tender For technical maintenance of sw drainage system in r-ii division during 2026-27. sh - providing and laying 450mm dia np2 rcc pipe for drainage system front of g and h block (b k dutt colony), jor bagh lane area under sub division-iii(r-ii division).

State Government

CTN :45703084

01 Jul, 2026 NA

Satana - Maharashtra

Tender For 1.providing,laying and fixing rcc pipe for drainage adiwasi society to bazar peth road 2.nala widering and deepening cc bandhara 3.water tank 4.construction under grund pvc gutter pipe gutter at mulher tal satana dist nashik

State Government

CTN :45678428

10 Jul, 2026 NA

Parganas - West Bengal

Tender For upgradation of jetting pipe, socket, nozzle, suction pipe and male female port for 4 nos jetting cum suction machine (car) of reg. no. as wb03d5886, wb03c1200, wb23b6498 and wb23c1198 under drainage and sewerage department of bmc.

State Government

CTN :45676982

30 Jun, 2026 4.81 Crore

Faridabad - Haryana

Tender For master drainage scheme faridabad-providing and laying of 1800mm dia. rcc np-3 pipe and installation of pumping machinery set under bata flyover adjecent ac nagar nala.

CTN :45423617

27 Jun, 2026 NA

Jamnagar - Gujarat

Tender For bid to ras supply of bathroom water shower rose 100mm , pvc connection 15x450mm long complete with nut bolt and washer , pvc connection 15x600mm long complete with nut bolt and washer , pvc swr pipe 110mm dia , pvc waste coupling 40mm , pvc waste coupling 32mm , pvc waste pipe corrugated 32 x 900 mm long , ss curtain bracket 25 mm dia , steel ms hinges butt 100 mm , steel ms hinges butt 75 mm , upvc elbow 20mm , upvc union 20mm , urinal flat back 450 x 350 x300mm , pvc lid for tank 1000 ltrs with hinges and screw , tank cover for tank 500 or 1000 ltrs , flush handle with flushing cistern , gi nipple 20 mm tank checknut , gi tank nipple 25 mm checknut , gun metal gate valve 15 mm , gun metal gate valve 20 mm , long press handle stove enable 150 mm , ms door spring 150 mm , ms hasp and staple 100 mm , pvc pillar tap water suitable , ss sink coupling 125 mm , ss waste coupling for sink 100 mm , white cement i kg bag , cpvc male adapter threaded 20mm x 20 mm , ss sink drainage board 1 mm thick , tower bolt aluminium anodised barrel 150 mm , whb 500 x 400 mm , bell joint repair clamp for di pipe 100 mm , di pipe k7 fitting tee 100 mm both end flange , bell joint repair clamp for ci pipe 100 mm , bell joint repair clamp for ci pipe 150 mm , bell joint repair clamp for ci pipe 200 mm , gate valve gun metal 50mm , gate valve gun metal 15mm , gi nipple 25x 50mm , gi nipple 25x 75mm , gi nipple 25x100mm , gi nipple 25x150mm , gi union 20mm , gi elbow 15 mm , gi socket 15mm , gi union 15mm , gate valve gun metal 25mm , gi socket 25mm , gi elbow 20mm , gi elbow 25mm , gi union 25mm , liquid defoaming agent , sodium hypoclorite solution , calcium hypochlorite , ms bolt 10 mm dia 150mm long , ms bolt 12 mm dia 200mm long , deodouring agent , detachable joint 20 mm for gi or hdpe pvc pipe , detachable joint 25 mm for gi or hdpe or pvc pipe , detachable joint 250 mm for ci pipe , detachable joint 250 mm for di pipe , detachable joint 40 mm for gi or hdpe or pvc pipe , detachable joint 50 mm for gi or hdpe or pvc pipe , detachable joint 80 mm for gi or hdpe or pvc pipe , eco clean 2300 herbal reagent 1 ltr , epdm gasket for bell mouth 100 to 150 mm size , epdm gasket for bell mouth 200-300 mm size , epdm gasket for detachable joint 100 to 150 mm size , epdm gasket for detachable joint 200 to 300 mm size , epdm rubber gasket for flange of di piple size 100 mm , epdm rubber gasket for socket end of di pipe size 100 mm , gi nipple 15 mm dia 100 mm long , gi nipple 15 mm dia 150 mm long , gi nipple 15 mm dia 50 mm long , gi nipple 20 mm dia 100 mm long , gi nipple 20 mm dia 150 mm long , gi nipple 20 mm dia 50 mm long , liquid form bio culture for waste water treatment , m seal 150 gm , nut 10 mm and 12 mm , pvc tape roll 20 mm width , round up herbisite 1 ltr , sealing thread , spun yarn , washers with 10 mm and 12 mm hole , white lead , gi bend 40mm , gi nipple 15 mm dia 250 mm long , gi nipple 15 mm dia 300 mm long , gi nipple 20 mm dia 250 mm long , gi nipple 20 mm dia 300 mm long , gi nipple 25 mm dia 300 mm long , jaggery , lead wool , poly electrolyte , upvc tee 15 mm dia , upvc tee 20 mm dia 20x15x20 mm , upvc tee 25 mm dia 25x20x25 mm , upvc tee 50 mm dia 50x25x50 , upvc tee 90 mm dia 90x50x90 , upvc union 160 mm dia , upvc pipe 15 mm dia , upvc pipe 20 mm dia , upvc pipe 25 mm dia , upvc pipe 40 mm dia , upvc pipe 90 mm dia , upvc valves 15 mm dia , upvc valves 160 mm dia , upvc valves 20 mm dia , upvc valves 25 mm dia , upvc valves 40 mm dia , upvc valves 50 mm dia , upvc valves 90 mm dia , urea carbamide , abrasive sand paper //bid details 2 / 124 150 grit , abrasive sand paper 320 grit , abrasive sand paper 400 grit , abrasive sand paper 80 grit , baize green cloth 56inch width , coconut broom , knob cp complete 25mm for door and drawer , lock 6 lever 100 mm brass , melamyne polish in 1 ltr , micro fiber cloth for polish , paint brush 25 mm , paint brush 50 mm , paint brush 75 mm , peg set brass for hat stand , knob pvc 25 mm complete

CTN :45666732

13 Jul, 2026 NA

Dhemaji - Assam

Tender For supply of provn of drainage system using 150mm dia pvc pipe comma 3m length comma 6kg slash cms quare pressure class comma heavy duty for bisa hg complex , a provn of drainage system using 150mm dia pvc pipe comma 3m length comma 6kg slash cm square pressure class comma heavy duty for bisa hg complex , b provn of drainage system using 150mm dia pvc pipe comma 3m length comma 6kg slash cm square pressure class comma heavy duty for bisa hg complex , c provn of drainage system using 150mm dia pvc pipe comma 3m length comma 6kg slash cm square pressure class comma heavy duty for bisa hg complex , d provn of drainage system using 150mm dia pvc pipe comma 3m length comma 6kg slash cm square pressure class comma heavy duty for bisa hg complex

State Government

CTN :45660452

07 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For unit rate of composite items for recharge scheme for new and defunct tube wells/wells for groundwater recharge in bhavnagar dist. for the year 2026-27 - half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional(r&b sor 2024-25 , it.code-06008a2a, p.no.70)(1 represents labour cess added), brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:5. (1- cement : 5 -fine sand) (b) conventional(r&b sor 2024-25, it.code-06001ba, p.no.67)(1 represents labour cess added), providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(r&b sor 2024-25 it.no.23067, pg.no.164)(1 represents labour cess added), providing & fixing 200 mm dia "u" pvc casing pipe "cm" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), providing & fixing 175 mm dia "u" pvc casing pipe "cs" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), drilling of bore well by dth rig in rocky formation in all talukas of all districts of zone - iii. up to 350 mtr. for dia 200mm(gwssb 2022-23 sor, it.no.3.2, p.no.2), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(b) dense or hard soil(r&b sor 2024-25 , it.code-04b001b, p.no.47)(1 represents labour cess added), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(d) soft rock not requiring blasting(r&b sor 2024-25 , it.code-04b001d, p.no.47) (1 represents labour cess added), jungle cutting and site clearing(r&b sor 2024-25 , it.code-26117a, p.no.246) (1represents labour cess added), pebbles of size 5 to 10 millimeter (river pebbles)(gwssb mech 2022-23 sor,anne-a sr 18 ), gravel of size 2 to 5 millimeter(gwssb mech 2022-23 sor,anne-a sr 18 ), coarse sand(gwssb 2022-23 sor, section 1d it.no.5.1, p.no.61), backfilling of excavated tranch for pipeline with soil(gwssb 2022-23 sor, section 1&2b it.no.14(1), p.no.40), suppliying o graded stone aggregate of following sizes (forw.b.m. road)(2) hand broken stoneaggregate 40 mm to 63 mm size.(r&b sor 2024-25 , it.code-26011b, p.no.176), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(iv) 20mm(r&b sor 2024-25 , it.code-26012d, p.no.176) (1 represents labour cess added), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(vi) 10mm(r&b sor 2024-25 , it.code-26012f, p.no.176) (1represents labour cess added), spreading and laying stone agreegate of different size in to proper layer specified as per design and drawing inncl. hand packing etc complete with all lead and lift (as per ra), providing and fixing in position white marble plate of size 45x45x1.8 cm incl ingraving the tettera as per drawing/as direct etc complete. (irr. sor 2024-25 ch.5 it.17 pg.22)

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

Underground Drain Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors