Union Fitting Tenders

Get complete information related to latest Union Fitting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Union Fitting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Union Fitting Tenders .

Filter

Loading....

Get Tender in Email

Co-operative

CTN :40561378

09 Jun, 2025 NA

Sitapur - Uttar Pradesh

Tender For competative e-bidding for supply of hardware miscellaneous material for season 2025-26 - m.s. plain washer to 11/2 , wire nail to 4 , split pin n.f. x 2 , split pin n.f. x 2 1/2 , split pin n.f. 3/16"x2", split pin n.f. 3/16"x1 1/2", nyloc nut accurate make 1/2", nyloc nut accurate make 3/4", nyloc nut accurate make 5/8", nyloc nut accurate make 7/8", nyloc nut accurate make 1" & 25mm, nyloc nut accurate make 22mm, m.s. rivit tata make 3/8 x 2 , s.s. wire 16 gauge, rubber joint 1/8 , rubber joint 1/16 , synthetic rubber sheet , rubber hose pipe dunlop make , rubber hose pipe dunlop make 3/4 , rubber hose pipe dunlop make 1 , emery cloth carbonrandum make (rough), emery cloth carbonrandum make (fine), emery cloth carbonrandum make (medium), emery tape carborandum make 2 (rough), emery tape carborandum make 2 (fine), emery tape carborandum make 2 (medium), teflon tape champion make , rustoline 500 ml, holdite yellow compound, shallock compound, m-seal (general purpose), araldite 180 gm pack, red lead dewaldi make, white lead shalimar/shakru make, cotton waste 1 grade white quality, cotton waste 1 grade colored quality, graphited powder 500 gm. pack, manila rope with test certificate 1 , manila rope with test certificate 3/4 , m.s. round to 3 dia, m.s. round 3 1/2 x 6", en-8 rod to 3 , en-8 rod 3 1/2 x 6", en-9 round 63mm, en-9 round 100 mm, m.s. steel wire rope x 6/19 with test certificate (usha martin make), steel wire rope x 6/19 hema core (usha martin make), u-clamp forged , u-clamp forged 5/8 , locktile 242 (thread locker), shight glass round toughned 200x15 mm, shight glass round toughned 120x12 mm, shight glass round toughned 100x12 mm, nylon sheet as per sample 230x410x20mm, c.i, plumber block s-520 (smr make), c.i, plumber block s-222 (smr make), c.i, plumber block s-528 (smr make), c.i, plumber block s-517 (smr make), c.i, plumber block s-519 (smr make), c.i, plumber block s-515 (smr make), copper pipe 8 mm, copper pipe 10 mm, coir rope , aluminium rivit , bearing retainer (locktite) 262 no 50mm, industrial therma meter with red indicator, canvas belt 4 x6 ply, canvas belt 6 x8 ply, grinding paste rough & fine carborendum 400gm, grinding paste rough & fine carborendum 100gm, c.i. cock 1 heavy duty, c.i. cock 3/4 heavy duty, c.i. cock 1/2 heavy duty, steel wire rope 19mm dia 6x36 construction hemp core (ush martin with t.c.), spring washer 5/16 square section ssss, spring washer 3/8 square section ssss, boiler gauge glass sleeve , boiler gauge glass klinger make h-7, neoprine rubber cone for gauge glass, neoprine rubber ring for gauge glass, spring washer 1 4bbbb, boiler gauge glass for x161/2 , wire braded flexible rubber hose pipe x1.5 mtr with both end nut (bsp), d-cycle , m.s. steam pipe for steam line & pressure about 300ii/aq.mm size , steamtrap valve 1/2", 3/4". 1", union socket complete (brass), ferrule (lubricated), lubricated copper pipe , lubricated complete (8 plunger), taflon tube 10mm o.d., m.s. counter shanok bolt 5/8 x2 , taflon rod 300 psi 1 , flat head nickled m/c screw 4 x 40 mm, flat head nickled m/c sorew 6 x 65 mm, flat head nickled m/c sorew 6 x 15 mm, gear coupling boss dia 185 flanged outer dia 220mm, reduction gear cooling fan as per sample, high carbon steel for boiler 3 x50 , nickle bolt double nut 12 x 60, nickle bolt double nut 12 x 40, nickle bolt double nut 10 x 40, s.s. nozzel with socket as per sample for c/f machine., brass nozzle as per sample, pressure gauge 6 dia bottom entry 0-151 bs, pressure gauge 6 dia bottom entry 0-60 bs, pressure gauge 6 dia bottom entry 0-150 bs, pressure gauge 6 dia bottom entry 0-300 bs, pressure gauge 6 dia back side entry 0-30 kg, pressure gauge 6 dia back side entry 0-15 kg, pressure gauge 6 dia back side entry 0-10 kg, pressure gauge 12 dial bottom entry 0-201 bs, counter 8 digt 12 x 4 , vaccuume gauge 6 dia bottom entry 0-30 bs, temp. gauge 6 dia stem type 0-200 c, digital temp. indicator 0-1000 c, thermo couple for 0-1000 c 12 long 2mm

CTN :40534248

18 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn

Central Government/Public Sector

CTN :39595097

03 Jun, 2025 NA

Goa - Goa

Tender For bid to ras corrigendum : supply of bronze fittings lot 13 for frigate gsl yard nos 1258 and 1259 - bronze straight equal union tee with outer thread dn15 pn160 , bronze straight equal union tee with outer thread dn20 pn160 , bronze end welded piece dn25 , bronze welded piece on pipe for union fittings dn15 pn40 , bronze track welded piece with adjusted plug dn15 , bronze welded piece for finger protector on pipe dn200 pn40 , bronze union-end snap-up overlapped connection dn3 pn100 , bronze intermediate union for overlapped connection type 6 dn6 pn100 , bronze screw in union with threaded end for pipe thread type 9 dn6 pn 16 , bronze screw-in union with threaded end for metric thread type 8 dn3 pn16 , bronze screw-in union with threaded end for metric thread type 8 dn10 pn16 , bronze plug nut m36x2 pn10 , bronze plug nut dn32 pn100 , bronze plug nut dn10 pn100 , bronze plug nut dn6 pn100 , wrench for quick opening nuts dn50 65 80 , bronze end welded piece dn20 m39x2

Loading, Please wait...

Union Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector