Latest union socket Tenders | Government union socket Tenders

Central Government/Public Sector

CTN :45220465

15 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For extension of last date of submission - conducting heat load survey of bank's office building at reserve bank of india, kanpur

Central Government And Public Sector

CTN :45194044

19 May, 2026 NA

Raipur - Chhattisgarh

Tender For resistive load bank for battery charger (supply voltage :30vdc ,max current : 50a). [ warranty period: 30 months after the date of delivery ] ]

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese

CTN :44371866

01 Jun, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : expression of interest for selection of consultant for electrical works at old ho building of the wbscard bank ltd. - expression of interest (eoi) - 4th call for old head building of the wbscard bank ltd. located at 25 d, shakespeare sarani, kolkata – 700 017 for: - 1. survey of the entire building for exploring and understanding the scope of work for repair, renovation & up-gradation of electrical system of the building. 2. preparation of detailed floor-wise-drawings of the proposed electrical system of the building and submission of the said drawings both in soft and hard mode. 3. detailed electrical load survey of the building considering new electrical system including assessment of required capacity and specification of silent diesel generator set to be installed and submission of report there against it both in soft and hard mode. 4. preparation of estimate (scope of work including approximate cost) for repair, renovation & up-gradation of electrical system of the building and submission of the said estimate both in soft and hard mode.

CTN :45038461

15 May, 2026 17.21 Lacs

Fatehgadh - Uttar Pradesh

Tender For bid to ras supply of health faucet (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , block board size 8 feet x 4 feet x 18mm , ball valve 20mm ptmt , gi pipe 15mm med grade , gi pipe 20mm x 6mtr med grade , glass corner self 12 inch , oil putty , silicon sealent with gun , spindle for cp or brass stop cock size 15mm , ss butt hinges 100mm , wall putty in 20kg , ball valve 20mm upvc , beading flat 20mm , cement birla white 1kg , cp door handle 125mm , door handle aluminium 150 mm isi marked , door seal , gi elbow 15mm , gi elbow 20mm , gi long screw 15mm x 150mm with checknut and bolt , gi nipple 15mm x 100mm , gi nipple 15mm x 150mm , gi nipple 20mm x 100mm , gi nipple 20mm x 150mm , gi socket 15mm , gi socket 20mm , gi socket 25mm , gi socket reducing 20x15mm , gi tee 15mm , gi tee 20mm , gi union 15mm , gi union 20mm , ms screw wood 25mm x 6mm , ms screw wood 30mm x 5mm , ms screw wood 50mm x 8mm , m seal sealing wax , nails 25mm long , nails 35mm long , nails 50mm long , nails 75mm long , nails 100mm long , nails 150mm long , nails for beading , nails wire 17 nos , nozzle brass 15mm male thread , gi pipe 15mm med grade , gi pipe 20mm med grade , gi pipe 40mm med grade , gi pipe 80mm med grade , gi pipe 50mm med grade , gi pipe 100mm med grade , gi pipe 25mm med grade , spindle for cp brass stop cock size 15 mm , ms butt hinges 75 mm , ms butt hinges 100mm , ms tower bolt 150mm , door handle aluminium 150 mm , gi elbow 25mm , gi elbow 40mm , gi nipple 10mmx100mm , gi nipple 10mmx150mm , gi nipple 15 mm x 100mm , gi long screw nipple with one check nut and socket size 15 x 100 mm , gi long screw nipple with checknut and socket 15 x 150 mm long , gi nipple 15mmx150mm , gi nipple 20mmx100mm , gi nipple 50mmx150mm , gi nipple 25mmx100mm , gi nipple 40mmx150mm , gi long screw nipple with one check nut and socket size 20 x 150 mm , gi hex nipple 15mm , gi socket 25mm , gi socket 40mm , gi socket 50mm , gi reducing socket 20mm x 15mm , gi reducing socket 25mm x 20mm , gi tee reducer 20mmx15mm , gi tee reducer 25mmx15mm , gi tee reducer 25mm x 20mm , gi elbow reducer 25mmx20mm , gi tee 25mm , gi union 25mm , gi union 40mm , rectangular glass shelf 18 inch , screw wood steel 15 mm , screw wooden steel 20mm , screw wood steel head 25 mm , screw wood steel 35 mm , nails 1 inch , nails 2 inch , bib cock ci 15 mm , pvc float valve 25 mm complete assembly , gi tubing medium grade 15 mm dia , gi wire mesh 3 feet width x 15 mtr long , oil putty glass putty , ms butt hinges 100 mm , door stoper , door seal 1 point 2 mtr , gi elbow 15 mm dia , elbow gi 20 mm , 25 mm gi elbow , gi nipple 15 mm x 50mm long , gi nipple 15mm 150mm length , gi nipple 20mm 100mm length , gi nipple 20mm 150mm length , gi nipple 20mm 75mm length , gi socket 15 mm , socket gi 20 mm , gi union socket 20 mm , gi union socket 25 mm , socket reducer 20mm x 15 mm , gi socket reducing 25mm x 20 mm , gi tee reducer 20mm x 15 mm , gi tee equal 15 mm , gi union socket 15 mm , union gi 25 mm , m seal , nails 15mm , bracket for whb block board size 8'x 4'x 18mm , bib cock ci 15 mm, ball valve 20mm ptmt , float valve 25mm , gi pipe , glass corner self 12", gi wire mesh 3' width x 15 mtr long, oil putty , silicon sealent with gun, spindle for cp/brass stop cock size 15mm, ms butt hinges 75 mm, ss butt hinges 100mm, wall putty in 20kg, ms tower bolt 150mm , ball valve 20mm upvc, beading flat 20mm, cement birla white 1kg, cp door handle 125mm, door handle aluminium 150 mm isi marked, door seal, gi elbow, gi long screw 15mm x 150mm with checknut & bolt, gi nipple 10mmx100mm, gi nipple 10mmx150mm, gi nipple 15mm x 100mm , gi long screw nipple with one check nut & socket size 15 x 100 mm, gi long screw nipple with checknut & socket 15 x 150 mm long, gi nipple, gi socket, gi tee,

Central Government/Public Sector

CTN :45126361

07 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For minutes of the pre-bid meeting - conducting heat load survey of bank's office building at reserve bank of india, kanpur

Central Government/Public Sector

CTN :45147788

21 May, 2026 NA

Narsinghpur - Madhya Pradesh

Tender For supply of sae 6000 flange 0.75 in , sae 6000 flange 1 in , sae 6000 flange 1.5 in , sae 6000 flange 0.5 in , pair of butt weld coupling 0.75 in , pair of butt weld coupling 1 in , pair of butt weld coupling 1.5 in , blank flange sae 0.5 in , blank flange sae 0.75 in , blank flange sae 1 in , blank flange sae 1.5 in , sae-split flange halves pair of two 0.75 in , sae-split flange halves pair of two 1 in , sae- split flange halves pair of two 1.5 in , ss union socket weld class 3000 0.5 in , ss union socket weld class 3000 0.75 in , ss union socket weld class 3000 1 in , ss union socket weld class 3000 1.25 in , ss union socket weld class 3000 1.5 in

CTN :45115476

18 May, 2026 21.01 Lacs

Pathankot - Punjab

Tender For supply of misc em and br items - ac static watthour meters - energy meter (v2) as per is 13779 (q2) , gi elbow 15mm specs as per pdf documents , gi elbow reducer specs as per pdf documents , gi nipple 15mm specs as per pdf documents , gi nipple 15mm x 50mm isi marked , gi nipple 20mm x 100mm make isi marked , gi nipple 20mm x 50mm dia isi marked , gi nipple 20mm x 80mm dia isi marked , gi plug 20mm dead specs as per pdf documents , gi plug 15mm dia isi marked , gi socket 15mm isi marked , gi socket 20mm dia isi marked , gi tee 15mm isi marked , gi tee 20mm isi marked , gi union 15mm dia isi marked , pvc pipes 15mm dia 3m long , gi elbow 15mm bore isi marked , gi elbow 20mm isi marked , gi elbow 25mm isi marked , gi nipple 15mmx100mm make isi marked , gi nipple 15mm x 300mm as per sample , gi nipple 15 x 150mm as per sample , gi nipple 20mm x 300mm as per sample , gi nipple 25mm x 150mm , gi nipple 40mm x 150mm , gi socket 25mm , gi socket 40 mm make r brand , gi socket 50mm , ci bib tap 20mm , pre laminated gypsum specs as per pdf documents , pvc socket for 110mm bore pipe , pvc socket for 75mm bore pipe , chemical for att 20 percent ec , ci collar 150mm dia , coarse aggregate 12 point 5mm graded , flush strip make specs as per pdf documents , g i wire mesh having specs as per pdf documents , s stainless steel specs as per pdf documents , sand course , sand fine , white cement based specs as per pdf documents , mannual changespecs as per pdf documents , mannual change over specs as per pdf documents , ht copper fuse 10 amps , ht copper fuse 20 amps , ht copper fuse 30 amps , ht copper fuse 40 amps , ht copper fuse 50 amps , ht copper fuse 60 amps , high tension tar tape 11000 volts , low tension tape 30 mtr , pg clamp aluminium specs as per pdf documents , high tension hard specs as per pdf documents , low tension hand gloves 1100 volts , bambrro ladder 22 foot , bambrro ladder 18 foot , bambrro ladder 15 foot , pvc float valve 20 mm specs as per pdf documents , pvc connection specs as per pdf documents , pvc bib cock 15 mm prima , cp bib cock long body 15 mm , pvc connection specs as per pdf documents , cp waste coupling 32mm for wash basin , pvc sheet cover for ewc , pvc urinal waste pipe 50 x 800mm , pvc waste pipe 40 x 1150mm , gi tee equal 15mm , gi union socket 15mm , gi socket 15mm , butt hinges steel 75mm , pvc kit for low specs as per pdf documents , helical door spring 150mm , gi elbow 15mm , gi pipe 20mm , m-seal 100g pack , gi union socket 20mm , gi nipple 15mm x 100mm , oil putty , pvc stop cock 15mm , cp waste coupling, 125mm for kitchen sink , face half turn for cp bib cock 15mm , gi nipple 15mm x 50mm , gi pipe 15mm , pvc lid for water specs as per pdf documents , figured glass of size 4feet x 4feet x 3mm , gi nipple 20mm x 150mm , looking mirror size specs as per pdf documents , gi nipple 15mm x 150mm , gi nipple 15mm x 75mm , plain sheet glass 3mm specs as per pdf documents , cp shower rose specs as per pdf documents , wooden screw 25mm pkt of 100 nos , jumper or washer 15mm , alumn floor door stoper double type , door seal 4feet long , gi plug 15mm , nut bolt and washers 3inch , half round bedding , aluminium door specs as per pdf documents , gi nipple 15mm x 100mm make isi marked , gi nipple 20mm x 150 mm , gi nipple 25 x 50 mm , gi nipple15mm x 75mm , gi plug 20mm specs as per pdf documents , gi union socket 15mm make r brand , gi union socket 20 mm make r brand , gi union socket 25 mm make r brand , plastic laminated sheet specs as per pdf documents , jumper or washer 20mmac static watthour meters - energy meter (v2) as per is 13779 (q2) , gi elbow 15mm specs as per pdf documents , gi elbow reducer specs as per pdf documents , gi nipple 15mm specs as per pdf documents , gi nipple 15mm x 50mm isi marked , gi nipple 20mm x 100mm make isi marked , gi nipple 20mm x 50mm dia isi marked , gi nipple 20mm x 80mm dia isi marked , gi plug 20mm dead specs as per pdf documents , gi plug 15mm dia isi marked , gi socke

corporations/Associations/Others

CTN :45085122

20 May, 2026 1.91 Lacs

Anpara - Uttar Pradesh

Tender For supply of boq misc c c - cs seamless impulse lines for oil (od 17mm, id 10mm) max. press 25kg, ss hose (bellow) pipe with ss brading having ss union socket with end fittings at both sides-, dimensions:, length: imtr hose pipe dia: 20 mm, (excludind brading), other details as per drawing, flexible hose pipe (length - 370 mm) dia-1/4" (6mm), (as per sample provided by user division), seal kit for induced draft fan actuator (as per sample), seal kit for forced draft fan actuator (as per sample), seal kit for 12" bore power cylinder (as per sample provided by user division)

CTN :43928878

05 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras bid to ras bid to ras corrigendum : providing of custom bid for services - rate contract for hiring of 500kw,1000kw and 1500kw load bank with m load facility for 02 years

Union Socket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others