Latest universal calibrator Tenders | Government universal calibrator Tenders

Central Government And Public Sector

CTN :45454742

11 Jun, 2026 NA

Lumding - Assam

Tender For supply, installation, testing and commissioning of dcus/gateways/ allocation of sim network service provider and the arrangement of sim cards to enable reliable medium for two-way communication between smart meter & amp:, hes (head end system) over rf mesh network/cellular network. 1. the dcu/gateway shall be compatible with the smart meters mentioned above. rf mesh network should use 865-867 mhz frequency band. 2. the data acquisition (push/pull) frequency shall be configurable 15 min, 30 min or 60 minutes. it shall push events such as tamper, power off etc. to hes immediately on occurrence/receipt from meters. 3. it shall have provision for the cellular, wifi and ethernet communication for the backhaul tohes. 4. sufficient number of gateways shall be installed in such a way that all the meters are covered in the network efficiently. 5. it shall be capable to handle data of minimum 500 nos. of any type of smart meter (1ph/3ph). it shall be able to communicate with the nearest meters at a distance of at least 300 m, depending on topographical features. 6. communication of the nearest meters with other meters shall be established through appropriate mesh formation. rf mesh shall support self-forming and self-healing features. 7. rfmesh shall support at least 15 no. of hops. 8. the equipment shall be weather-proof and dust-proof (minimum rating: ip54 for indoor and ip65 for outdoor installation). it shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc. 9. it shall have passed the following emc tests from reputed lab: conducted emission, electrostatic discharge (esd), radiated immunity, electrical fast transient (eft) - burst, surge, rf conducted disturbances. 10. rf mesh network shall be established to meet the slas as mentioned in tender document. 11. replacement warranty period shall be 66 (sixty-six) months from the date of supply or 60 (sixty) months from the date of commissioning, whichever is earlier. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45418862

24 Jun, 2026 NA

Goa - Goa

Tender For supply of awning equipment - stanchion (73.03 mm. o.d. x 5.16 μμ.τηκ.), stay (73.03 mm. o.d. x 5.16μμ.τηκ.), base plate for stanchion (210 x 100 x 12thk.), base plate for stay (150 x 100 x 12thk.), socket and plug, eye bolt for foot with stainless steel keep chain, cleat for awning tackles for stanchion, flush type eye plate (for detail refer annexure a), m.s. glav. 76.2 mm., sheave dia double block with becket & thimble suitable for 12 mm dia (38 mm.circ.) polyamide/polyamide rope and with swivel eye hook to suit ring of flush type eye plt., 12mm. dia polyamide rope, m.s. glav. 76.2 mm., sheave dia double block without becket & thimble suitable for 12 mm dia (38 μμ. circ.) circ.) polyamide/polyamide rope and with swivel eye hook to suit thimble of 12mm dia fswr., al. ferrule to suit, 12%%c rope, al. ferrule to suit, 10%%c rope, 12mm. dia f.s.w.r., covered with canvas., short link roller, shackle, thimble for 10 mm dia, f.s.w.r. (open type), bow shackle, thimble for 10 dia rope (open type), thimble for 12 dia rope (open type), shackle, slip with screw, awning canvas grey shade, side ridge rope, canvassed 10mm. dia gswr, 6x37 const, (bl=42kn), centre ridge rope, canvassed 12mm. dia gswr, 6x37 const, (bl=60kn), grommet size 32 (spur tooth), saffron & white terrycotton cloth for ceremonial awning, top fitting for stay, top plate for stanchion (100 dia x 10thk.), 15 thk. stanchion lug (det. drawing shown in sht 2.), stay lug on stanchion (110 x 60 x 15 thk.), m-24 bolt & nut 65 long, horizontal tube 73.03 mm.o.d. x5.16μμ.τηκ., flange for horizontal tube (90%%c x 6mm), horizontal tube lug (70lx50wx10thk.), awning stanchion lug (70lx50w×10thk.), support plate (90-80l x 50w x 10thk), m-16 bolt & nut 65 long, awning support tube 73.03 mm.o.d. x 5.16μμ.τηκ., vertical support tube 73.03 mm.o.d. x 5.16μμ.τηκ., end flange (single side) on support bearing, (73.03 ø x5 τηκ.), bracket for vertical support tube (150 x 100 x 5thk.), awning support tube lug (80 x 50 x 5thk), vertical support tube lug (95 x 50 x 5thk), m12 bolt & nut 35 long (for joining item no 42 and 43), support bearing for awning support tube (150 long x 10thk), bracket (70 x 70 x 5thk, doubler plate (120x200x5thk.), canvas cloth for guns/weapons/machinery on deck/superstructure, foldable umbrella, retractable shade for gangway, ceremonial lifebuoys with stand, canvas covers for each and every weather deck fitting and machinery openings

CTN :45417262

10 Jun, 2026 NA

Guwahati - Assam

Tender For procurement of goods, equipment terrestrial lidar with integrated automatic total station 1" (arc seconds) angular accuracy , resistivity imaging system for 2d electrical resistivity survey , automatic weather station , thermal infrared camera , portable air quality monitoring system , walkie-talkie communication , flexural strength test of tiles , abrasion test of tiles , aggregate polishing , desiccator (vacuum) , motor (5hp, 3hp, 2hp, 1hp, 0.50 hp) , -accelerometer set of 5 with different frequencies , compressometer-extensometer for concrete specimen , concrete surface-mount strain gauge system , compaction factor apparatus , portable digital microscope system , portable density meter , axle pad weighing system , temperature controlled water bath , gyratory compactor for asphalt specimens , normal refrigerator , environmental climate chamber , contact angle meter , bitumen emulsion charge detection instrument , drainage and seepage tank (visualisation of seepage flow) , symons rain gauge , digital rain gage , rainfall event logger , digital evaporation recorder , eco sounder , universal water current meter with direction indicator , vibratory hammer , concrete specimen cutter , accelerated curing tank , compressor with nozzle , double distillation assembly , indian standard sieves (200 mm diameter) , indian standard sieves (300 mm diameter) , indian standard sieves (450 mm diameter) , sieve shaker mechanical tapping motion , oven , digital weighing balance (15 kg) , digital weighing balance (30 kg) , digital weighing balance (220 g) , cone penetration apparatus determines the liquid limit of soils , shrinkage limit apparatus , density bottle , compaction moulds (light and heavy both) , compaction hammer (light and heavy both) , loading frame mechanised for soil and material testing applications, including unconfined compression (uc), cbr, and similar tests-50kn universal frame. , loading frame manual , proving ring: 2kn, 10kn, 25kn, 50kn, 100kn. , dial gauge: 0.002x5mm, 0.01x25mm-3 nos each in 1 set. , pvc drum (barrel) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , rubber glove , stop watch , spatula , glass plate , glass plate , glass plate , air tight container , air tight container , steel ruler , steel ruler , borosilicate beaker , borosilicate beaker , borosilicate beaker , measuring jar (plastic) , measuring jar (plastic) , non-return valve, air valve , m.s flange , lubricating oil , lead , spum yarn , water meter , pvc bend , pvc y branch , pvc dod bend , pvc pipe sloc , c.p piller tap , c.p waste coupling , pvc waste pipe , pvc connection flexible tube , ppr pipe fittings , pvc floor trap , pvc gully trap , pvc multi trap , pvc multi floor trap , white cement , pop (plaster of paris) , push cock , plastic water tank , water tank overflow alarm , butane/propane disposable cylinder , scaffolding pipes: , shuttering plywood sheets , plastic brick mould. 9"x4.5"x3" , mould and concrete spacers plastic i shaped dumbell paver mould 60mm , plastic zigzag paver mould , plastic cosmic paver block mould , pvc mold for cement cover block multi cover (20/25/40/50mm-42 kvt without hole) , pvc mold for cement cover block multi cover (20/25/40/50mm -25 kvt with hole) , ms h-beams: 100 100 length 1 m , ms h-beams: 100x100 length 2 m , ms h-beams: 100 100 length 3 m , ms h-beams: 150x150 length 1 m , tie rods: 2 m , tie rods: 3 m , formwork clamps/clips: , shuttering oil/release agent: , polythene sheets , adjustable column clamp , adjustable concrete beam formwork clamp , adjustable concrete beam formwork clamp , corner angles for formwork: , safety belts and harnesses: , flagging reflective tape: , scaffolding safety tags and tag holders , safety gloves , safety jacket , safety helmets , safety boots

CTN :45408559

24 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of customized amc/cmc for pre-owned products - all weather equipment perfect enhancement grounding system; as per sow; comprehensive maintenance contract (cmc); as per sow; no,customized amc/cmc for pre-owned products - mil grade and iec tested perfect grounding system; as per sow; comprehensive maintenance contract (cmc); as per sow; no

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

State Government

CTN :45361263

11 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply, installation, testing & commissioning of tools, equipment and consumables for school of engineering - addressable fire alarm control panel, addressable smoke detector with base, addressable multisensor detector with base, addressable heat detector with base, addressable manual call point (mcp), addressable audio-visual strobe, addressable input/output module, addressable isolator module, addressable control module, addressable monitor module, addressable repeater panel, addressable zone module, programming software & license, programming tool / interface, laptop for programming, loop simulation / fault kit, wooden wiring cubicle with metal framing, 18v brushless cordless jigsaw machine, heavy duty cable cutter, cable insulation remover, deburring tool, spirit level 1200mm, precision screwdriver set, quick/trigger clamp, step bit, hole saw, tubular crimping tool, magnetic wrist belt, tool belt, tool trolley, non contact tachometer, phase sequence meter, 3-phase multifunction meter, squirrel cage induction motor with mechnical loading, break drum type), single phase induction motor including centrifugul switch along with starting and running capacitor, soft starter for motors, dol starter, star delta starter, power quality meter, upgraded fault simulator, 5 pin industrial plug and socket, spirit level, pipe cutter, plastic), plastic rounder, plastic pipe chamfer, external bending spring, external bending spring, internal bending spring, internal bending spring, crimping tool, , over head shower with shower arm 300 mm, thermostatic mixing valves, digital inclinometer, copper tube bender, rothenberger standard bender, rothenberger robend 4000 set, portable hand held electric pipe threading machine, hdpe butt fusion machine, co2 cylinder with gas, co2 regulator with preheater, vfd, inverter, battery charger indicator, multimeter, clamp meter, earth resistance tester, potentiometer, voltmeter, micron vacuum gauge, all weather air conditioner, 4- way reversing valve, open pcb of outdoor unit of inverter type air conditioner, advanced leak detector, portable oscilloscope, contact tip 1.2mm, gmaw nozzle, mig wire spool, 1.2mm, dye penetration test kit, fcaw wire spool, 1.2mm, wraping foil for wire roll, mesh cable tray, mesh bracket support , l type, mesh bracket support , c type, mesh tray nut bolt coupler, pvc trunk (mms), pvc trunk (mms), pvc casing caping (mms), pvc casing caping (mms), pvc conduit (mms), pvc conduit (mms), gi washers, self threaded screw, din rail, race way ( small holes ), pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable clip, pvc wire, tubular lug, angle holder, cable tie mounts, modular box, modular plate, intermediate switch, bell push switch, pg pvc gland, masking tape, masking tape, control panel, surface light, pvc conduit male & female adapter, distribution board, r 600a refrigerant gas can, lithium-ion battery, lead acid battery, pcb, verrow board, resistor, resistor, zener diode, diode, transistor, transistor, transistor, transistor, capacitor, capacitor, capacitor, capacitor, voltage regulator ic, step down transformer, ups battery, ni-mh battery, led, smd led strip, led lamp, heat sink, dc -dc led driver, switch, test switch, teflon tape, programming cable, batteries for panel, cpvc pipe – 20 mm, cpvc pipe – 25 mm, cpvc 20 mm elbow 90°, cpvc 25 mm elbow 90°, cpvc 20 mm tee, cpvc 25 mm tee, cpvc 25×20 mm reducer coupler, cpvc 25×20 mm tee, cpvc 20 mm coupler, cpvc 25 mm coupler, cpvc union 20/25 mm, cpvc reducer 25×20 mm, cpvc mta, cpvc mta, cpvc fta, cpvc fta, cpvc tank connector, cpvc 20 mm end cap, cpvc 25 mm end cap, thread seal tape, cpvc solvent cement, cpvc brush set, pex-al-pex pipe, pex-al-pex pipe, pipe clips / supports, pipe clips / supports, fitting holding clamps, fitting holding clamps, equal tee (pushfit type), equal tee (pushfit type), reducing tee (pushfit type), reducing tee (pushfit type), female tee (push

Central Government/Public Sector

CTN :45331357

17 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of hdpe body rocking play equipment with base spring , little explorers climb & hold station , frp gravity based straight playway structure , frp gravity based spiral playway structure , frp gravity based straight playway structure for multistation , frp gravity based spiral playway structure for multistation , multi-child rocker see-saw , kids multi-activity climbing unit , multi-play station weather canopy , two- seater suspended play unit , natural grass cum installation for play area , epdm flooring cum installation , painting and greasing of play area equipments , civil works for epdm flooring

CTN :45263289

10 Jun, 2026 NA

Jaipur - Rajasthan

Tender For hiring of services for installations of led light fitting along with associated equipment at sv stations under jlpl rajasthan region - sitc of pole & ups msp, sitc 10 feet light pole with foundation, sitc of 1kva ups, sitc of pole & ups abu road, sitc 10 feet light pole with foundation, sitc of 1kva ups, sitc of pole & ups nasirabad, sitc 10 feet light pole with foundation, sitc of 1kva ups, sitc of junction box & cable msp, laying of cable with end termination, supply and installation of cable tray, sitc of weather proof junction boxes, sitc of gi earth strip size 25 mm x 4mm, sitc of junction box & cable abu road, laying of cable with end termination, supply and installation of cable tray, sitc of weather proof junction boxes, sitc of gi earth strip size 25 mm x 4mm, sitc of junction box & cable nasirabad, laying of cable with end termination, supply and installation of cable tray, sitc of weather proof junction boxes, sitc of gi earth strip size 25 mm x 4mm

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45281561

11 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

Universal Calibrator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others