Latest unloader plunger Tenders | Government unloader plunger Tenders

CTN :45432757

19 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of copper pipe 5-8 per mtr , stapler big , hand needle per pkt , machine needle per pkt , machine oil 1ltr , multi thread per pcs , embrodry thread per pcs , lace silver per mtr , lace golden per mtr , sewing machine repairing and service , disel genrator repairing and service , printer hp laser jet tank , ceiling fan repairing and service , fashner 2 shut , 1-2 inch pvc insulation paper per kg , 1-4 inch pvc insulation per ft , mcb board for ac switch with mcb 25a , 15a plug top , gulli 1-2 inch , ac service pipe and pump , ms wire iron wire , hp laser jet tank printer ink , old dhoti , hss tool bit 3-4x 6inch , co2 gas cylnder , board marker , board duster , pench screw 1.5mm per pkt , brown tape 2inch , taflon tape , pvc tape 19mm , ms flats 100x 10mm per kg , power saw blade per pcs , pedestal grinder machine belt joint type 200mm , cleaning brush 6 inch per pcs , window ac motor , window ac service charge , colin 700ml , handwash detol 200ml , all out , water thermos 2ltr , wall fan repairing and service , door curtain per pcs , switch 16a , switch 6a , plastic chair cushion type , tyre for mahindra bolero mft 20-25 , r-32 gas with cylnder 8 kg , r- 134a gas per can , r-22 gas per can , copper pipe 1-2 per mtr , copper pipe 1-4 per mtr , sensor 1.5 ton split ac , pcb split ac 1.5 ton , capacitor 50mfd 1.5 ton ac , fine capacitor 2.5mfd , 410 gas 8kg cylnder , thermosate deepfrizer , relay deepfrizer , capacitor 40-60 , running capacitor , stating capacitor , relay for ac

Central Government/Public Sector

CTN :45431075

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 52 kgs rail above meter long qty.70 nos. 610.870 rm, 31.698 mts tms lot no. bpl/pw/n/ note: 1. buyer should visit the site before bidding. 2.mode of delivery, sectional weight in running meter wear and tear 2.02 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5. material other than description not to be delivered. 6. cutting may be allowed for easy loading.

Central Government/Public Sector

CTN :45431076

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kgs rail meter above and below 8 meter qty.160 nos. 619.14 rm, 37.359 mts tms lot no. bpl/n /bina/scrap 60 kg rail 2025-26 07 dt 14.02.2026 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 2.39 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5. material other than description not to be delivered. 6. cutting may be allowed for easy loading.

State Government

CTN :45412896

11 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For request for proposal (rfp) for selection of firm / company for supply, installation, testing & commissioning of tools, equipment and consumables addressable fire alarm control panel , addressable smoke detector with base , addressable multisensor detector with base , addressable heat detector with base , addressable manual call point (mcp) , addressable audio-visual strobe , addressable input/output module , addressable isolator module , addressable control module , addressable monitor module , addressable repeater panel , addressable zone module , programming software & license , programming tool / interface , laptop for programming , loop simulation / fault kit , wooden wiring cubicle with metal framing , 18v brushless cordless jigsaw machine , heavy duty cable cutter , cable insulation remover , deburring tool , spirit level 1200mm , precision screwdriver set , quick/trigger clamp , step bit , hole saw , tubular crimping tool , magnetic wrist belt , , , tool belt , tool trolley , non contact tachometer , phase sequence meter , , , 3-phase multifunction meter , squirrel cage induction motor with mechnical loading (break drum type) , single phase induction motor including centrifugul switch along with starting and running capacitor , soft starter for motors , dol starter , star delta starter , power quality meter , upgraded fault simulator , 5 pin industrial plug and socket , spirit level , pipe cutter (plastic) , plastic rounder , plastic pipe chamfer , external bending spring , external bending spring , internal bending spring , internal bending spring , crimping tool , over head shower with shower arm 300 mm , thermostatic mixing valves , digital inclinometer , copper tube bender , , rothenberger standard bender , rothenberger robend 4000 set , portable hand held electric pipe threading machine , hdpe butt fusion machine , co2 cylinder with gas , co2 regulator with preheater , vfd , inverter , vibration meter , thermal imager/thermographic camera , lokring joint complete set , inverter pcb testing jig , thermostat , varistor , power relay , rectifier

CTN :45307317

03 Jun, 2026 2.73 Crore

Baramulla - Jammu And Kashmir

Tender For supply of maint of improved design of iaios , ms mesh wire size 12.7 mm x 76.2 mm , ms mesh wire size 2600 mm x 800 mm , punched tape concertina coi , punched tape baby concertina coil , fence post type circular hollow section , truss support post with rail end cap , truss support post with rail end cap ms steel tube , straining y arm for supporting top ptcc , intermediate y arm for supporting top ptcc , razor running tape , omega clamp 89 mm dia 35 mm width 3 mm thickness , brace band 89 mm 41 mm width 4 mm thickness , mushroom head bolt with breakable head , eye bolt with loop nut , anchor rod 10mm dia 300mm long , tie wire 1.4mm dia 100mm length , flat clamps for panel connection flat , ss 304 mushroom head bolt, m8x25 , manufacturing sand , aggregate 20mm. , aggregate 40mm. , quick setting compound conforming , ms binding wire , industrial leather safety gloves , heavy duty 4 lbs sledge hamme , steel gurmala planer fabricated from ms steel , cast iron plumb bobs , shovel square , adjustable hacksaw frame , wooden gurmala , bricktrowel , double edge , non metallic fiberglass measuring tape 5 mtr , non-metallic fiberglass measuring tape 30 mtr , heavy duty pickaxes , rivet gun machine , wire cutter 150mm , collapsible y joint 12 ft long , collapsible y joint 10 ft long , heavy duty cutting pliers , ratchet spanner with deep socket 14 mm , flexible transparent pvc leveling tube 25 meters , iron cutter heavy duty , ratchet spanner single socket13mm , hog ring machine with wire , helmet

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45248666

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kg rail 1 meter long and above below 06 meter qty. 50 nos. 188.04 rm, 11.346 mts tms lot no. bpl/bhs/n/p.w/scrap/60 kg / rail 2025-26/18 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.49 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.7. fish plate glued joint if found during the delivery time not be delivered and removed by stock holder.

Central Government/Public Sector

CTN :45220395

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kgs rail one meter long and below 06 meter qty.102 nos. 436.43 rm, 26.334 mts tms lot no bpl/bhs/n/p-way/scrap/60 kg /rail/2025-26/17 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.49 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.6, fish plate g/j if any attached with rail will not delivered and removed before delivery.

Central Government/Public Sector

CTN :45220397

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 60 kgs rail one meter long and below 06 meter qty.60 nos. 167.97 rm, 10.135 mts tms lot no bpl/bhs/n/p-way/scrap/60 kg /rail/2025-26/20 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.48 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.6, fish plate g/j if any attached with rail will not delivered and removed before delivery.

Central Government/Public Sector

CTN :45220398

26 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap 52 kgs rail more than 01 meter qty.101 nos. 1146.34 rm, 59.484 mts tms lot no bpl/svpi/scrap rail 52 kg /2025-26/25 note: 1. buyer should visit the site before bidding. 2.mode of delivery by running meter wear and tear 1.94 % only. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered. 6. cutting may be allowed for easy loading.

Unloader Plunger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors