Latest unloading service Tenders | Government unloading service Tenders

State Government

CTN :45713422

30 Jun, 2026 NA

Jhajjar - Haryana

Tender For job work for repair of impeller, shaft sleeve, make ring, stage bush with labour, loading, unloading and carriage charge complete in all respect repair of 7.5 hp submersible pump set / at village dhandlan ,repair of panel board including checking of all cable joint, cleaning of panel board with the help of air pressure & brush and re-connection of loose joint by electrician /panel board repair/40 hp panel board repair at w/w dujana

State Government

CTN :45710043

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For pathera block: kanina panchayat: pathera dist.: mahendragarh annual maintenance work for water supply - labour for lowering & unlowering of submersible motor 12.5 hp including carriage,loading,unloading etc, rewinding of submersible motor.

State Government

CTN :45710102

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For pathera block: kanina panchayat: pathera dist.: mahendragarh annual maintenance work for water supply - labour for lowering & unlowering of submersible motor 12.5 hp including carriage,loading,unloading etc, rewinding of submersible motor 12.5 hp.

State Government

CTN :45710400

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For pathera block: kanina panchayat: pathera dist.: mahendragarh annual maintenance work for water supply -12.5 stage pump new including pump shaft making brush , impeller seat and threading including making of heavy duty steel sleeve making bronze chuck nut, with rubber seat with brass welding , greasing, glain dori, opening and refitting, loading, unloading, carriage complete job / near canal t/well, pathera

CTN :45712022

13 Jul, 2026 NA

Multi City - Multi State

Tender For providing of handling and transport on lumpsum basis - baggase transport laoding & unloading work

CTN :45695732

03 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of various items required for implementation of mgnregs & vb-g ram g - 1st class picked jhama bricks(traditional) , stone boulder 225 mm above) , stone boulder (225mm-150mm) , laterite boulder , fine sand , medium sand , coarse sand , bamboo (8cm-10cm diaj including fixing , eucalyptus bullah (7.5cm-10cm dia) , eucalyptus bullah (12.5cm-15cm dia) , eucalyptus bullah (17.5cm-20cm dia) , sal bullah (7.5cm-10cm dia) , sal bullah (12.5cm-15cm dia) , sal bullah (17.5cm-20cm dia) , nail , hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings , hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings , hire charges of 5 kva generator , hire charges of 3 kva generator , hire charges of monkey set , loading unloading & stacking sand/stone aggregate (less than 40mm nominal size) , loading unloading & stacking stone aggregate (above 40mm nominal size) , loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material , stone screening type a (13.2 mm) , stone screening type b (11.2mm) , 1st class traditional bricks (kiln burnt) , loading, unloading & stacking by manual means (r.c.c. pipes, c.1. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia , loading, unloading & stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced cement pipes) 900 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia , sausage wire net , wood dust , tor steel rods/hysd bars/tmt bars , (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt , bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ss l)(fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt bars (other than sail/tata/rini/jsw/jspl/shyam/srmb/bmasl/elec rosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786) , loading, unloading and stacking by manual means of , steel , neem wood , other local wood , sisu/gamar wood , local sal wood , bright finished or black enamelled mild steel screws , 40 mm , bright finished or black enamelled mild steel screws , 20 mm , bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm. , bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm. , bright finished or black enameled mild steel butt , hinges 100x58x 1.90 mm , coal tarring , fan hook , r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area , udaypur marble slab (for floor, lobby etc) 18 mm. thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m , udaypur marble slab (for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for wall/dado) 18 mm. thick of size 0.3 sq m to 0.6 sq m , frp composite door frame 66mm x 70mm. , frp composite door frame 66mm x 90mm , coloured pedestal type w.c. pan 580x440 mm , 32 mm dia polythene flush pipe , 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble) , gl pipe 32 mm dia medium quality for underground works , gl pipe 40 mm dia medium quality for underground works , cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) (for concealed work) , thermocol 12.5 mm thick. , chromium plated stop cock (equivalent to code no. 513(a) & 513(8) & model - tropical/sumthing special of essco or similar brand). , chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - flore

CTN :45688040

10 Jul, 2026 NA

Multi City - Maharashtra

Tender For srm e-tender: work of transportation, winching, loading & unloading of power transformers / accessories from various stores centers / required places to the msetcl work site / division stores & vice versa along with allied works under ehv o&m circle parli.

CTN :45705974

27 Jun, 2026 12.00 Lacs

Jodhpur - Rajasthan

Tender For rc mandore and under depot loading unloading work

State Government

CTN :45705912

30 Jun, 2026 NA

Gohana - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,manhole chambers providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the engineer-in-charge. 1. type:- extra heavy duty set (ehd-35) 560mm clear opening, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) .,steel reinforcement steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level note: reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. thermo-mechanically treated bars of grade fe-500d or more,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand)

State Government

CTN :45705824

30 Jun, 2026 NA

Pinjore - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

Unloading Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government