Latest unmanned air vehicle spares Tenders | Government unmanned air vehicle spares Tenders

Central Government/Public Sector

CTN :45123739

25 May, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : name of job: package - a : erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory, fdps piping and system in boiler & bunker area from nearest fire water line header, handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling and common system of unit#1 at 2x660 mw cspgcl korba west tps, district korba, chhattisgarh.

State Government

CTN :45204999

22 May, 2026 14.99 Lacs

Multi City - Telangana

Tender For general ,r batch division - hydrogen gas cylinders loading and unloading, transportation of hydrogen gas cylinders from stores to unit gas rooms of unit 3and 4 of stage-ii/ytps, scheduled greasing of all ht and lt motors pertaining to electrical division, id, fd, pa, mills, coal feeders, air pre heaters, esps, etc of boiler division, vacuum pumps, cw, dmcw pumps etc of turbine division of stage-ii/ytps and topping up of oils to id fans, fd fans, pa fans, mills, mot, cw n acw pumps, bfps, dg sets etc. along with providing of 1no. tractor on hire basis for the period from 01.04.2026 or from the date of commencement of work to 31.03.2027

CTN :45109542

22 May, 2026 2.27 Lacs

Bardhaman - West Bengal

Tender For corrigendum : dismantling transportation and installation of air pollution control including id fan and civil work from real jambad unit, bahula colliery to jk pit of siduli colliery

Central Government/Public Sector

CTN :45209836

08 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For fabrication, design and development of ecc2 box cover of hhp wdp4d loco of steel item no304 including material, labour and transportation charges as per emd part no. 10633788.note : sealing gasket to be provided to make air tight. hinges to be provided at the bottom and cover should be painted. warranty period 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45210737

15 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of tower type cab air conditioning unit (2.0 tr min) along with control panel, mounting frame and anchoring arrangement to coach body and all the accessories generally confirming to specification no-icf/elec/110 (latest). note-mounting dimensions must not exceed 1356 mm (height) x 916 mm (width) x 350 mm (depth) to replace the existing cab ac. packing instructions:-as per standard packing, it should beensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier.. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45182599

08 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For bogie bolster arrgt.to drg. no.icf/mrvc/m-0-4-001/col.i, alt m and rdso specn.c-9202, rev.02 or latest. the firm shall fulfil the requirements as per icf/md/specn.147,issue status:01, rev-02. items shall be suitably packed to avoid ingress of water in center pivot housing and spigot housing. threaded air connection at bolster end shall be closed. bio-degradable plastic/wooden covers may be used for closing. all machined areas shall be coated with grease (lithium based) before packing. special condition : paint scheme shall be as per drg. firm to supply the bogie bolster with suitable packing sothat the bogie bolster parts like cp pin housing, side bearing flange, damper bracket , reservoir bracket,levelling valve fixing bracket and spigot housing are not damaged during transportation /handling /storage. [ warranty period: 60 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45173970

19 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/32/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) nr 75039288941 bobsnm1 (nlb) 2) special repair 75069295384 bobsnm1 (nlb) 3) se 75079260099 bobsnm1 (nlb) 4) nr 75039187008 bobsnm1 (nlb) 5) se 75079216690 bobsnm1 (nlb) 6) cr 75019260042 bobsnm1 (nlb) 7) se 75079316581 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45138651

19 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of industrial gas cylinders for qc labs hpcl - gas cylinder,argon mz qc lab , gas cylinder,oxygen mz qc lab , gas cylinder,helium mz qc lab , gas cylinder,p10 gas mz qc lab , gas cylinder,nitrogen mz qc lab , gas cylinder,h2 gas mz qc lab , gas cylinder,zero air gas mz qc lab , transportation of material mz qc lab , hydrotesting of gas cylinder mz qc lab , gas cylinder,argon silvasa qc lab , gas cylinder,helium silvasa qc lab , gas cylinder,p10 gas silvasa qc lab , transportation of material silvasa qc lab , hydrotesting of gas cylinder silvasa qc lab

State Government

CTN :44935840

19 May, 2026 11.53 Lacs

Mandi - Himachal Pradesh

Tender For corrigendum : design engineering manufacture supply insurance transportation installation testing and commissioning of high pressure refrigerated compressed air dryer including replacement of existing air dryers at larji hep

Central Government/Public Sector

CTN :45154773

04 Jun, 2026 NA

Avadi - Tamil Nadu

Tender For supply of bogie frame arrangement for emu trailer coaches with 180/150kn air spring-(qr code as per cde/rcf letter no. md44121 dt. 24.11.2021.), as per drawing: icf/mrvc/d-0-3-001 alt.'lr1' col.1 (without bush to drg. no. emu/m-3-2-060), packing instruction: bogie frame (pl nos:- 35327017, 30984348, 30986000, 30985912) each guide on bogie frame to be properly wrapped with biodegradable transparent plastic sheet. machined portion of bogie frame components shouldbe covered with suitable eco friendly cushioning material. wooden/suitable spacers havingadequate strength to be provided between bogie frames to prevent rubbing against each other during transportation/loading/unloading. supplier to ensure that bogie frame shouldbe transported with utmost safety till unloading in cs/avd so that components are not damaged fitted on bogie frame and dimensions duly maintained. a list (easily visible) should bepasted on each box showing po no. , pl no., description, drawing. no./spec, qty, firm's name &address and dispatch detail etc. for identification. transit damage if any shall be at the cost of supplier. , proction procedure: as per drawing [ warranty period: 66 months after the date of delivery ]

Unmanned Air Vehicle Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector