Latest unslaked lime Tenders | Government unslaked lime Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45684608

01 Jul, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : fixation of local market rate for implementation of different scheme under mgnrega under sainthia development block - lmr, hire charges of concrete mixer with fuel 0.25 to 0.40 cum with hopper, hire charges of diesel road roller with fuel- 8 to 10 tonne, vibrator with fuel (needle type 40 mm), surface vibrator with fuel, water tanker 5000 ltr. capacity, coolie, fitter(grade1), technician, helper (technician), seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, water proofing materials, welding by electric plant, wire mesh (rabbit), diesel oil, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, gi pipes 15 mm dia, gi pipes 20 mm dia, gi pipes 25 mm dia, gi pipes 32 mm dia, gi pipes 40mm dia, gi pipes 50 mm dia, gi pipes 65 mm dia, gi pipes 80 mm dia, slotted cowl 75 mm, slotted cowl 110 mm, polyethylene water storage tank with cover and suitable locking arrangemnet, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm inner 100 mm dia, shower rose c.p.brass for 15 to 20 mm inner 150 mm dia, vitreous china squatting plate, ball valve 15 mm dia, ball valve 20 mm dia, ball valve 25 mm dia, brass full way valve with c.i. wheel (screwed end) 20 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rest 275mmx125mmx25mm, carriage of steam coal, carriage of stone aggregate below 40 mm nominal size, carriage of steel, carriage of stone aggregate 40 mm nominal size and above, carriage of tar bitumen, carriage of soling stone & masonry stone, carriage of carriage of moorum, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, carriage of cost of neelgiri/maxican grass truf sqm, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type) p trap, circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2

CTN :45713149

07 Jul, 2026 NA

East Khasi Hills - Meghalaya

Tender For supply of poly aluminium chloride 25kg pack size , super white unslaked lime , alum crystal , ot solution for chlorine test kit , bleaching powder grade-i qulaity is-1065 marked

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

State Government

CTN :45686601

29 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate for implementation of different scheme under mgnrega under rajnagar development block - lmr, hire charges of concrete mixer with fuel 0.25 to 0.40 cum with hopper, hire charges of diesel road roller with fuel- 8 to 10 tonne, vibrator with fuel (needle type 40 mm), surface vibrator with fuel, water tanker 5000 ltr. capacity, coolie, fitter(grade1), technician, helper (technician), seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, water proofing materials, welding by electric plant, wire mesh (rabbit), diesel oil, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, gi pipes 15 mm dia, gi pipes 20 mm dia, gi pipes 25 mm dia, gi pipes 32 mm dia, gi pipes 40mm dia, gi pipes 50 mm dia, gi pipes 65 mm dia, gi pipes 80 mm dia, slotted cowl 75 mm, slotted cowl 110 mm, polyethylene water storage tank with cover and suitable locking arrangemnet, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm inner 100 mm dia, shower rose c.p.brass for 15 to 20 mm inner 150 mm dia, vitreous china squatting plate, ball valve 15 mm dia, ball valve 20 mm dia, ball valve 25 mm dia, brass full way valve with c.i. wheel (screwed end) 20 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rest 275mmx125mmx25mm, carriage of steam coal, carriage of stone aggregate below 40 mm nominal size, carriage of steel, carriage of stone aggregate 40 mm nominal size and above, carriage of tar bitumen, carriage of soling stone & masonry stone, carriage of carriage of moorum, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, carriage of cost of neelgiri/maxican grass truf sqm, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type) p trap, circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socke

State Government

CTN :45693428

30 Jun, 2026 NA

Birbhum - West Bengal

Tender For 24_lmr/vgramg/fixation of local market rate of material items for implementation of mgnrega schemes under bolpur sriniketan development block, birbhum. - hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x

State Government

CTN :45681201

27 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev block and 10 nos of gp under khoyrasole dev. block for the year 2026 - 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

Central Government/Public Sector

CTN :44223874

25 Jun, 2026 NA

Gurdaspur - Punjab

Tender For bid to ras bid to ras supply of cream mometasone furoate 0. 1percent , tazarotene 1percent tube of 30 gm , salicylic acid ,1. 15percent, , dithranol ,1. 15percent, , coal tar ,5. 3percent, ointment of 30 gm , tab zinc 158 mg ,elemetal, , cap itraconazole 50mg ,suprabio available, , cream eberconazole 1percent, 60 gm. , 2percent salicylic acid face wash 60ml , cream pimecrolimus 1percent tube of 30 gm , tab ivermectin 12 mg , hydroquinone 20mg, tretinion 0. 25mg and fluticasone propinate 0. 50 mg cream of 20 gm , methylene bisbenzoyriazolyl tetramethyl butylphenol sunban matte gel tube of 75 gm , ciclopirox 1. 0percent and zinc pyrithione 1. 0percent shampoo bott of 120 ml , cr kojic acid 2percent,niacinamind 4percent,soy isoflavones 0. 2percent,tetttrahydrocurcumin 0. 1percent, of15gm , salicylic acid 2percent,nicotinamide, vitamin b36percent,,azelaic acid 5percent, of 30gm , cream l glutathione, ptero carpus marsupium extract, tranexamic acid, rumex occidential ext, 90percent tetra hydrocurcumin, galangal ext, 20gm , retinol 0. 15percent, eye seryl 1percent phytonadioane 1percent 15gm cream , betamethasone 0. 05percent, calcipotriol 0. 05percent, tube of 15gm , cream urea 40percent, jar of 50gm. , lotion 2percent minoxidil with procapil in aqua base 60ml. ,alcohol free, , lotion minoxidil 5percent with procapil, 60ml ,alcohol free in aqua base, , permethrin cream 1percent, 120gm , lotion calcipotriol 0. 005percent, clobetasol propionate 0. 05percent 20ml. , coal tar 4. 25percent, salicylic acid 2percent, bott of 100ml , lotion halobetasol 0. 05percent , salicylic acid 3. 5percent, 30ml , calamine 8percent,aloe vera 10percent, light liquid paraffin10percent, olivem 800. 60ml , salicylic acid 17percent, lactic acid 17percent lot 10ml , cream ozenoxacin 1percent 5gm , cyclopentasiloxane, cyelomethicone, cetostearyl alcohol, c 13-15 alkane, glyceryl monostearate, vitamin e acetate, polysorbate 20, sorbital isostearate, phenyl dimethicone of 100gm. , ivermectin 1percent cream, 30gm , griseofulvin oral suspenstion usp ,microsize, 125mg per ml. syp 120ml. , gel nadifloxacin 1percent, 20gm , cyclopensiloxane and dimethicone cross polymer, silicone elastomer blend, octyl methoxy cinnamate, diethylamine hydroxybenzoyl hexyl benzoate, zinc oxide, titanium spf-50, 100gm , minocycline hydrochloride topical gel 4percent, 15gm , salicylic acid 1percent gel, 30gm. , polypropylene blue monofilament, 70 to 75 cm, size 6 0, 3 bi 8 circle reverse cutting, 12 to 13 mm double needle , sunscreem spf 50, pa , uva, bemt, octocrylene, zinc oxide, mbbt, octylmethoxycinnamate, oxybenzone, avobenzone, 50gm cream , tab trioxalen 25 mg , white soft paraffin, light liquid paraffin, aloe vera jar of 200 gms , methotrexate 15mg ,preservative free, 3 ml inj , dressing silicon gel sheet 5 inch x 4. 5 inch , inj guselkumab 100mg per ml , ceramide , desonide 0. 5percent bott of 50 ml , lot aluminium chlorohydrate 20percent bott of 150 gm , gel tretinion 0. 1percent tube of 20 gm , oint clobetasole propionate 0. 05percent tube of 15 gm , monofilament polyprolene sutures 3 zero, 3 bi 8 circle reverse cutting ,box of 12, , monofilament polyprolene sutures 2 zero, 3 bi 8 circle reverse cutting ,box of 12, , 0. 05percent clobetasole, 3. 50percent salycylic acid, hydroxy propyl cellulose, hexylene glycol lotion bott of 30 ml , 0. 05percent clobetasole propionate, salycylic acid 3. 5percent, light liquid paraffin, white soft paraffin, isopropyl myristate, propylene glycol oint tube of 20 gm //bid details2 / 40

Central Government And Public Sector

CTN :45624441

07 Jul, 2026 29.62 Lacs

Jhansi - Uttar Pradesh

Tender For supply of material under minor civil and electric work (conservation of (conservation of ancient monument) to repair of ruined part and adjoining area of seventh gate inside kalinjar fort, banda. - supply of materials, brick ballast 25 mm gauge (1st class bricks), unslaked lime (katni), surkhi powder 1st class, coarse sand meadium gauge (betwa), gur/sheera in semi liquid form, dry gum in crystel form not less than 3 mm, dry bel fruit giri, flagstone 60x60 cm and above of thickenss 50 mm with permissible variation in 5% in thickness, flagstone 60x60 cm and above of thickenss 75 mm with permissible ivariation in 5% in thickness, r.r. stone boulder (10-30 kg), san (raw jute), sand sotne beam (3.00x0.30x0.30m)

Central Government/Public Sector

CTN :45607221

20 Jul, 2026 40.00 Crore

Lucknow - Uttar Pradesh

Tender For supply of surgical consumables - ll, absorbable hemostat (oxidized regenerated cellulose) 4 in.x 8 in. (10 cm x 20 cm), absorbable hemostat (oxidized regenerated cellulose) 2 in x 4 in (5.1cm x 10.2cm), absorbable hemostat (oxidized regenerated cellulose) 2 in. x 3in. (5.1cm x 7.6cm), absorbable hemostat (oxidized regenerated cellulose) 3 in x 4in. (7.6 cm x10.2 cm), absorbable hemostat powder microporous polysaccharide hemosphere in one single sterile pack, absorbable hemostatic gelatin sponge (7cm x 5cm x 1cm), absorbable hemostatic gelatin sponge (8cm x 3cm) anal, absorbable nasal dressing, absorbent mat, access sheath kink resistant ureteral access sheath with hydrophilic coating. flexible, single tapered tip design to reduce trauma to the scope during insertion and dilation, should have radiopaque marker band for fluoroscopic confirmation. single latch hub for single handed operation without rotational alignment. dual durometer dilator to reducer buckling and facilitate placement in tortuous ureters. length of the access sheath should be 28cm/36cm/46cm. should be available in size 11/13, 12/14, 13/15., accessories (tubings, humidifier chamber, nasal prongs) for resipicare high flow nasal oxygen therapy adult and pediatric, accessories compatible for probes of mindray monitor (i) lncs disposable probes (ii)ecg cable (iii) spo2 extension (iv) masimo probe (v) ibp cable with transducer (v) etco2 sample line (vi) eeg cup electrode (vii) temprature probe (viii) nibp hose (ix)nibp cuff (x) battery., acd solution bag 500 ml, acrylic powder (for cranioplasty), acrylic repair material, active life bag with clip, active life one piece drainable cut to fit pouch with stomahesive skin barrier with one sided comfort panel & tape collar-19mm to 64mm, adhesive felt pad 5x5cm, 10x10cm, adhesive remover spray consists hexamethyldisiloxane and cyclonentasiloxane silicone polymer for easy removal of the base plate. alcohol and sting free. neutralize odour with lemon grass formulation., adhesive silk tape all sizes, adhesive suture less securement device for stabilization of vascular access devices. the devices should have a sliding post retainer and a pigtail clip for holding the catheter lumen and should be sterile latex-free, non-absorbent with breathable pads., adhesive tape (silk based cloth) 3", adhesive tape cloth 3" , 100mm linear cutter blue cartridge/ reload for 1.5mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 100mm linear cutter green cartridge/ reload for 2mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 2-octyl cyanoacrylate 0.5 ml quantity for skin closure up to 15 cm incision., 3d acetabular shell, 4mm cutting drill compatible with spine endoscopy drill system, 4mm diamond drill burr compatible with spine endoscopy drill system, 5mm laparoscopic shear with 15mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping, and coagulating blood vessel upto and including 7mm in diameter, having advance hemostasis mode and compatible with generator installed in institute through tender process, available in sizes 23cm, 36 cm, 45cm, with the next-generation adaptive tissue technology algorithm, improved pad life, and improved temperature management for enhanced tissue protection., 5mm laparoscopic shear with 18mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping and coagulating blood vessels upto and including 7mm in diameter, with integrated transducer, having advance hemostasis mode and compatible with generator installed in institute available in sizes 36 cm, 20 cm compatible with generator installed in the institute., 60mm linear cutter blue cartridge/ reload for 1.5mm cl

Unslaked Lime Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors