Latest upholstery fabric Tenders | Government upholstery fabric Tenders

Central Government/Public Sector

CTN :40538228

19 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of fire retardant vinyl coated upholstery fabric (artificial leather ) for economic coaches colour signal gray ral -7004 with width 127 to 132 cms, confirming to rdso str no. rdso /2008 /cg/-07 rev -0 1 of septmber 2023 in rolls of 30 meters. [ warranty period: 30 months after the date of delivery ]

CTN :40508277

18 Jun, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of 4377 pvc coated nylon fabric grey colour canvas

Central Government/Public Sector

CTN :40510141

13 Jun, 2025 NA

Gondal - Gujarat

Tender For fire retardant vinyl coated upholstery fabric (artificial leather) to size: 127 to 132 cm. widt h x 30 mtr. long roll, conforming to rdso specn. no. rdso / 2008 / cg-07 (rev.- 01). read to all amend ment with latest (rev.) issue : september, 2023. quantity wise colour: as per annexure -1 to match uphols tery of three tier economy (lwaccne) coaches. * (samples to be approved for colour and texture before b ulk supply). note- material to be procure from rcf vendor list. [ warranty period: 54 months after the da te of delivery ]

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

State Government

CTN :40373133

06 Jun, 2025 NA

Kokrajhar - Assam

Tender For rate contract supply educational sports essentials school essentials under btr. - sport bagspecification: 1. main fabric : 100% polyester pv coated star dobby.2. thickness of fabric : 0.40 mm3. weight: 450 gram.4. lining: 100% polyester 120 gsm5. niwar: 10 gram. in 1 meter inside full lining with narrow non-woven fabric.6. size: 48 x 33 x 23 cm.7. compartment : 38. additional: pocket on front bottom with 4 cm. gusset with chain size 12 x 23 cm. and two adjustable buckle (daralin)9. jali: both side air mash jali bottle pocket 19 x 22 x 17 cm.10. zip: y2k no. 811. puller: with niwarbateck shoulder pithu size 48 x 8 cm. 10 mm. poly foam and air mash.12. branding: logo printing front side of the bag., sport capspecification: 1. main fabric : high quality 100% cotton twill 16/12.2. fuzing : imported on front side.3. number of pannel : 54. flap : 8.5 cm imported pvc visor.5. velcro : back side velcro with main fabric covering inside cotton tap covering.6. branding : front as per logo embroidery, track suitspecification: 1. fabric (composition): knitted fabric.2. percentage of blending (in case of blended fabric) : polyester 100%3. mass (gram. per square mtr.) : 260-270 gram.4. fabric construction : knitted5. raising at inner side of main fabric : yes6. upper lining : yes7. lower lining : yes8. lining material : 100% polyester mesh.9. slide fastener for upper closing : yes10. upper provided with piping : yes11. lower provided with piping : yes12. piping fabric mass (gram. per square mtr.): 260-265 gram.13. ph value : 5-714. colour fastness to washing : 4+15. size : small, medium, large, x-large.16. number of pocket upper : 2 side17. number of pocket lower : 2 side, water bottle (1.00 ltr)specification: size : h-274(+/-2) mm x od dia 85.2 (+/-2)mmweight : minimum 110 gmsmaterial : poly propylene, hygienic & 100% food grade, bpa free, leak & break proof, translucent, body flip to open & easy to sip, finger loop for easy carry, wide mouth for easy cleaning., shoesspecification: i. sole bond strength,n/mm : min 2.0 : satra tm 411: 1992/ iso 17708:2018ii. whole shoe flexingat 1,00,000 flexing : no damage to shoecomponents and no sole open (satra tm 92:2016), geometry boxes (mathematical drawing instruments)geometry boxes (mathematical drawing instruments)specifications:thickness of the sheet used for geometry boxes (mathematical drawing instruments) should be 0.22 ( 0.01 mm) and made out of tin-free mild steel (press metal sheet with varnish coated). the corners should be curved and the edges of both bottoms and top should be rolled so that there are no sharp corners. the box should have double lock. box length 181 5mm, breadth 75 3mm, height 18 2mm the top of the box should be printed with non-toxic polyester ink. then it should be glazed with non-toxic material. it should have scratch guard. box should have compartments for separating and protecting the components from damages and made out of high impact polystyrene.size: 175x70x12mm (with 1 mmtolerance)thickness: 0.45mm 0.05mminside of the top lid should be printed with tables of metric equivalence and apollonius and pythagoras theorem.compartment (separator):size: 175 x 70 x 12 mmthickness : 0.45 +- 0.05 mmmaterial : high impact polystyrene (refer to bidding documents for more specification), commercial plastic scale plastic scale : 30 cm. should be made of high quality general purposepolystyrene, virgin and clear grade, ball penball point pen- blue ink, elastic grip for pressure free writing, light weight body makes it easy to write long, calculatorspecial buttons for grand total (gt), mark up (mu) and correct (1>) 120 steps cheek function. hard cover for extra protection and durability auto replay function, 12 digits display, indian digit separator 12 digit calculator runs on solar and battery, minimum 3year battery life come with 1 year warranty, dictionaryenglish assamese / bodo, atlasatlas with details of all the districts of assam, all the state of india and all the

Central Government/Public Sector

CTN :40419567

20 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of vinyl coated upholstery fabric (artificial leather) for non ac coaching sto ck to rdso appoved sample no.alnac-03 to rdso spec. no.rdso/2008/cg -07, (rev.0 of aug.0 8, with 5 amendements last amd. no.5 is issued in aug-2016 & corrigendum 1 of may 2015) [ warranty period: 54 months after the date of delivery ]

Central Government And Public Sector

CTN :40411617

02 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply of vinyl coated upholstery fabric (artificial leather)- green colour. specification :-rdso/2008/c g-07 (rev.-0) of august 2008 with five amendments. last amendment no. 5 issued in august 2016 & corrig endum-1 of may, 2015. size width 127 cm minimum in roll of 30 meters minimum length. [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40409875

27 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of corner sofa set to tirupadiripuliyur railway station - corner sofa set to make lee karter with remi sytlo corner sofa model 3+2 seate r solid handle teak walnut wood finish, with wooden frame, zig zag spring pocket spring high density pu foam 32d and gt sheet upholstery fabric dimension o f 261.5cm x 203 cm x 86.5 cm seating height 47cm [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :40411386

23 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of fire retardent vinyl coated upholstery fabric artificial leather for non-ac coaches confirming to colour code al nac-03 with width 127 to 132 cms, confirming to rdso str no. rdso/2008/cg-07 rev- 1 in rolls of 30 mtrs [ warranty period: 54 months after the date of delivery ]

Central Government/Public Sector

CTN :40329394

23 May, 2025 NA

Jodhpur - Rajasthan

Tender For supply of fire retardent vinyl coated upholstery fabric artificial leather for%a0 non-ac coaches confir ming to colour code al nac-03 with width 127 to 132 cms, confirming to rdso str no. rdso/2008/cg-0 7%a0 rev-1 in rolls of 30 mtrs. [ warranty period: 54 months after the date of delivery ]

Upholstery Fabric Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors