Latest ups machine scrap Tenders | Government ups machine scrap Tenders

Central Government And Public Sector

CTN :45454742

11 Jun, 2026 NA

Lumding - Assam

Tender For supply, installation, testing and commissioning of dcus/gateways/ allocation of sim network service provider and the arrangement of sim cards to enable reliable medium for two-way communication between smart meter & amp:, hes (head end system) over rf mesh network/cellular network. 1. the dcu/gateway shall be compatible with the smart meters mentioned above. rf mesh network should use 865-867 mhz frequency band. 2. the data acquisition (push/pull) frequency shall be configurable 15 min, 30 min or 60 minutes. it shall push events such as tamper, power off etc. to hes immediately on occurrence/receipt from meters. 3. it shall have provision for the cellular, wifi and ethernet communication for the backhaul tohes. 4. sufficient number of gateways shall be installed in such a way that all the meters are covered in the network efficiently. 5. it shall be capable to handle data of minimum 500 nos. of any type of smart meter (1ph/3ph). it shall be able to communicate with the nearest meters at a distance of at least 300 m, depending on topographical features. 6. communication of the nearest meters with other meters shall be established through appropriate mesh formation. rf mesh shall support self-forming and self-healing features. 7. rfmesh shall support at least 15 no. of hops. 8. the equipment shall be weather-proof and dust-proof (minimum rating: ip54 for indoor and ip65 for outdoor installation). it shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc. 9. it shall have passed the following emc tests from reputed lab: conducted emission, electrostatic discharge (esd), radiated immunity, electrical fast transient (eft) - burst, surge, rf conducted disturbances. 10. rf mesh network shall be established to meet the slas as mentioned in tender document. 11. replacement warranty period shall be 66 (sixty-six) months from the date of supply or 60 (sixty) months from the date of commissioning, whichever is earlier. [ warranty period: 30 months after the date of delivery ] ]

CTN :45439997

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of simulator workstation with rugged controller , drone simulator software licence standard , high fidelity simulator workstation with rugged controller , 3d simulation software licence advanced , vr headset 6 dof and sim compatible , trainer workstation with instructor simulator , 55 inch led display for trainer workstation , networking cabling and power management lan plus ups , workstation desk and ergonomic chair set , split air conditioner 1 and half ton , posters flex banners and cut section models , printer brother t4500 , high performance cad workstation , fdm 3d printer bambu h2d with ams combo , fdm 3d printer bambu h2s with ams combo , fdm 3d printer bambu x1 carbon with ams combo , filaments abs tpu pla plaplus assorted , filament dryer creality space pi x4 or equivalent , resin 3d printer prusa sl 1s or equivalent sla or msla with resin material , industrial 3d scanner creality otter or equivalent , laser engraver and cutter machine 40 watt , wooden tables chairs and workbenches set of 06 , power management fitting and backup inverter 2 kva , advanced drone repair equipment soldering station digital microscope esd mats oscilloscope , drone electronics sensors and spares kit , storage almirahs lockable , posters flex banners and cut section models , 3 axis drone stability test jig with proprietary software , bldc motor thrust test bench with proprietary software , drone sensor integration and testing equipment , gps testing equipment with proprietary software , flight controller assembly programming station , propeller balancer , battery charging and testing station , battery repair station , drone and 3d printer service tools , soldering and rework station yihua 982d iii or equivalet , esd workbenches , workstations for tuning or programming , line of sight trainer uav with controller , vtol trainer uav with mission planner tricopter or quadcopter , fixed wing trainer uav with mission planner , fixed wing vtol uav system with day and night camera dooaf module , day and night enabled quadcopter with dooaf capability , surveillance and payload delivery drone with mission planner hexacopter or octacopter , storage box for drones and accessories , storage almirahs , lab tables and workstations with storage , split air conditioner 2 ton , interactive panel 75 inch or larger 4k uhd, multi touch with ops , 55 inch led display , study chairs with ergonomic and stackable , split ac 1 and half ton , 20 day training programme for 15 individuals with flying repair fabrication with study material , soccer drones with propeller cage , soccer drone arena including netted enclosure with goal posts //bid details 2 / 41

CTN :45281229

08 Jun, 2026 NA

Unnao - Uttar Pradesh

Tender For corrigendum : providing of repair and overhauling service - camera for cctv system (v2); supply, installation testing and commissioning of stqc certified cctv 45 nos with nvr recording backup for 60 days and 2 hrs power backup; yes; buyer premises

CTN :45389413

22 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of 4mp ptz camera , 4mp bullet camera , 32 channel nvr , view cutter , wireless mouse , optical fiber cable ofc , 2.5 sq mm 2 core power cable , e2000 e2k to sc fiber optic patch cord , led lights 150 w , security hooter , ote media converter , 16 port ote rack , 10 kva online ups with battery bank , camera pole , power strip , hdpe rope , poe switch , rj45 connector , 55 inch led tv , hdmi cable , fiber optic joint enclosure , 24 port l2 switch , motorola handheld radio set , 4k ptz camera , cat 6 utp cable , motion sensor light , 16 inch led tv , monitor 24 inch , static sentry surveillance and detection system , keyboard , core i5 laptop , 4 channel nvr , 8 channel nvr , 16 channel nvr , 4 channel dvr , 8 port switch , 16 port poe switch , 16 amp mcb , 10 kva ups with battery backup , sc to sc fiber optic patch cord * /bid number : gem/2026/b/7551666 + /dated: 01-06-2026 ' ' / bid document 1 / 36

CTN :45363442

06 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of lab items for civil department - boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit) , los angeles abrasion testing machine with counter standards: en 1097-2, 12697-17, 13450; astm c131,c535; aashto t96 description specification: the machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. the drum is rotated at a speed of 31-33 r.p.m. the internal shelf provided with the machine confirms to astm, aashto and en standards. the machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. the drum is equipped with an interlock device which allows the operator to lock the drum into position. , plastic limit apparatus 1.glass plate 20 cm x 15 cm having ground ends and one side frosted. 2.brass or stainless steel rod 3 mm dia x 150 mm long 3.flexible spatula - 8 cm long, 2 cm wide 4.set of 6 moisture containers 5.porcelaine basin 150 mm dia. 6.plastic wash bottle 500ml, weighing balance -100 kg capacity capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), flow table apparatus for concrete with accessoriesdimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45363424

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for civil lab - civil engineering, auger boring engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), weighing balance 200 kg capacity with 50g accuracy capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), weighing balance 50kg capacity with 10g accuracy capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), complete set of seive for fine aggregate 200 dia type: is standard test sieves for fine aggregate material: brass frame with brass woven wire mesh diameter: 200 mm height: as per is specification aperture sizes (complete set):4.75 mm, 2.36 mm, 1.18 mm, 600 m, 300 m, 150 m, pan & lid standards: is 2386 (part i) / is 460 finish: smooth, corrosion-resistant accessories: lid and bottom pan included, complete set of seive for course aggregate 200 dia brass; 200 mm dia; complete set (80 4.75 mm); lid & pan., flow table apparatus with all accessories(hand operateddimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

corporations/Associations/Others

CTN :43114307

01 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For bid to ras corrigendum : tender for supply of supply installation and commissioning of cctv system and public address system at allahabad d d - supply of 5mp ip fixed bullet camera indoor / outdoor with varifocal lens , with supported edge analytics and mounting accessories with 128 gb sd card , supply of 2 mp ptz dome camera outdoor / indoor with 30x optical zoom , 10x digital zoom and with supported edge analytics and mounting accessories with 128 gb sd card. , supply of 5mp fixed dome camera indoor / outdoor ip camera , varifocal lens , with supported edge analytics and mounting accessories with 128 gb sd card , supply of 5mp fixed bullet camera indoor / outdoor ip camera , autofocus motorized remote zoom , with supported edge analytics and mounting accessories with sd card 128 gb , supply of face recognition & forensic search camera 6 mp with analytics along with inbuilt fr licence with 128 gb sd card , supply of 4 mp long range bullet camera to cover lane for lpr (licence plate recognition) , supply of 40 mp critical surveillance camera for surveillance of critical and crowded area with 128 gb sd card , supply of thermal enhanced fixed camera , supply of dual channel ptz camera (thermal + optical) , supply of body worn camera systems with 64gb inbuilt storage with complete set of charging dockyard and other required accessories , supply of video management software (vms) software with licenses for camera for all above mentioned cameras and additional licenses for exiting bosch make cameras-161 nos. , supply of network video server cum storage with 200tb usable storage after raid6 configuration and with failover configuration , supply of client workstation with 6gb graphics adapter , 21.5 inch led monitor , keyboard and mouse for control room operation. , supply of ptz joystick controller for cctv system , supply of 6x2 matrix full hd video wall of 55 display panels along with matrix controller and complete system including mounting frame and full hd hdmi cables for connectivity from workstation to video wall. , supply of switch with 48 25g sfp28 ports and 8 100g qsfp28 ports , supply of gige l3 1ru chassis with 24 100/1000 basex sfp , 4 1g/10g sfp+ , 4 sfp28 (1g/10g/25g) ports and 2 qsfp28 vfl ports. , supply of fixed 1ru chassis switch with 24 poe 1g baset , 2 1g rj45/sfp+ combo , 2 1g/10g sfp+ uplink/vfl ports. , supply of 8 port field switches with 8nos poe+ ports , rj-45 10/100/1000 mbps ports and 2xsfp slots , supply of 10g sfp+ sm , lc fo transceiver modules for above switch , make same as above switch , supply of 1g sm fo , lc sfp transceiver modules for above switches , make same as above switch , supply of 8-port kvm switch with foldable monitor , keyboard & mouse , supply of ip based two way public address (pa) system with application software (with perpetual license) and hardware , supply of ip based outdoor horn speaker with amplifier , supply of ip based indoor speaker with amplifier , supply of ip paging sip system , supply of 19 inch 42u server rack with 800mm width , 1200mm depth including all accessories , supply of indoor 19 inch 12u network rack including all accessories , supply of outdoor , 19 inch 9u network rack including all accessories , supply of hot dip galvanized 5 mtr poles for mounting cameras , supply of 40kva online smart ups in 1 + 1 redundant configuration with separate battery bank for each ups for 30minutes battery backup , supply of 20kva online smart ups in 1 + 1 redundant configuration with separate battery bank for each ups for 30minutes battery backup , supply of 10kva online smart ups with 30 minutes battery backup , supply of 5kva online smart ups with 30 minutes battery backup , supply of 3kva online smart ups 30minutes battery backup , supply of indoor junction box with required mccb/ mcb and required accessories for power distribution at ups point for 40/20/10 kva ups , supply of indoor junction box with required mccb / mcb and required accessories for distribution of

CTN :45282015

06 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For corrigendum : supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter syst

corporations/Associations/Others

CTN :45352731

10 Jun, 2026 NA

Dinajpur - West Bengal

Tender For civil, plumbing and electrical works of model ayush opd at raiganj shd at bhatol phc including borewell pump, supply, installation, testing and commissioning of air condition and power backup system in the district of uttar dinajpur, west bengal during the year 2025-26.

corporations/Associations/Others

CTN :45352734

10 Jun, 2026 NA

Dinajpur - West Bengal

Tender For civil, plumbing and electrical works of model ayush opd at kunor shd at kunor bphc including borewell pump, supply, installation, testing and commissioning of air condition and power backup system in the district of uttar dinajpur, west bengal during the year 2025-26.

Ups Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others