Latest upvc elbow Tenders | Government upvc elbow Tenders

Central Government/Public Sector

CTN :41055450

02 Aug, 2025 NA

Bikaner - Rajasthan

Tender For supply of distemper 20 kg of each bucket of approved make and isi mark , stainer for distemper 100 ml yellow oxide and red oxide , synthetic enamel paint black of approved make and isi mark , synthetic enamel paint white of approved make and isi mark , synthetic enamel paint golden brown of approved make and isi mark , synthetic enamel paint red of approved make and isi mark , portland pozolana cement of capacity 50 kg each bag of approved brand and isi mark bangur shreeji etc isi marked of 43 grade , ptmt bib cock 15 mm dia , c p brass bib cock of size 15 mm nominal dia of approved make and isi mark , cp brass angle cock 15 mm dia , cp shower 100 mm dia , un plasticised pvc connection pipe 60 cm long 15 mm bore of approved make and isi mark , pvc connection pipe for geyser hot and cold 60 cm long 15 mm bore of approved make and isi mark , low level flushing cistern capacity 10 ltr of approved make and isi mark , cistern kit , looking mirror 450x600x5 mm , 32 mm pvc waste pipe of approved make and isi mark , thinner of approved make and isi mark , 4 painting bruss of approved make and isi mark , 3 painting bruss of approved make and isi mark , seat cover for european type ewc , health faucet with chain tube approved make and isi mark , jet spray with connection pipe for ewc , cpvc pipe 20 mm , cpvc socket 20 mm dia , cpvc elbow 20 mm dia , cpvc brass tee 15x20 mm , cpvc tee 20x20 mm , cpvc pipe 25 mm , cpvc socket 25 mm dia , cpvc elbow 25 mm dia , cpvc brass fta 15 to 20 mm , cpvc fta 15 to 20 mm , cpvc brass mta 15 to 20 mm , cpvc mta 15 to 20 , cpvc tank nipple 20 mm , cpvc tank nipple 25 mm , cpvc reducer 20 to 25 mm , cpvc brass elbow 20 to 15 mm , cpvc union 20 mm , cpvc union 25 mm , cpvc gate valve 20 mm dia , cpvc gate valve 25 mm dia , upvc gate valve 15 mm dia , upvc gate valve 25 mm dia , rubber washer for ewc seat , pvc float valve 15 mm , steel coupling for sink 38 40mm , ci d joint 110 mm dia 2 wide collar with nut bolt and ring , 80 mm rubber ring blue colour for d joint , upvc socket 15 mm , upvc socket 25 mm , upvc elbow 15 mm , white cement birla white 1 kg pack , m seal 60 gm pack , solvent 100 ml pack , taflon tape , hexa blade twin side , x nipple 15 mm dia and 50 mm long , gi nipple 15 mm and 50mm long , gi nipple 15 mm and 75mm long , gi nipple 15 mm and 110mm long , spindle half turn for 15 mm dia bib cock , spindle full turn for 15 mm dia bib cock , hammer drill machine gbh 220 bosch make 720 w //bid details 2 / 41

State Government

CTN :40876010

19 Jul, 2025 NA

Harda - Madhya Pradesh

Tender For corrigendum : purchased for plumbing sanitary item - , water tank isi double layer 200 lit, water tank isi double layer 500 lit, water tank isi double layer 1000lit, water tank isi double layer 2000lit, upvc pipe 1/2 inch, upvc pipe 3/4 inch, upvc pipe 1 inch, upvc pipe 2 inch, pvc drain pipe 2 inch, pvc drain pipe 4 inch, upvc socket 1/2 inch, upvc socket 3/4 inch, upvc socket 1 inch, upvc socket 2 inch, upvc socket 2 inch, upvc elbow 1/2 inch, upvc elbow 3/4 inch, upvc elbow 1 inch, upvc elbow 2 inch, upvc tee 1/2 inch, upvc tee 3/4 inch, upvc tee 1 inch, upvc tee 2 inch, upvc coupling 1/2 inch, upvc coupling 3/4 inch, upvc coupling 1 inch, upvc coupling 2 inch, upvc union 1/2 inch, upvc union 3/4 inch, upvc union 1 inch, upvc union 2 inch, upvc ball valve 1/2 inch, upvc ball valve 3/4 inch, upvc ball valve 1 inch, upvc ball valve 2 inch, upvc tank nipple 1/2 inch, upvc tank nipple 3/4 inch, upvc tank nipple 1 inch, upvc tank nipple 2 inch, upvc brass tee 1/2 inch, upvc brass tee 3/4 inch, upvc brass tee 1 inch, upvc brass tee 2 inch, indian toilet seat 21 inch, indian toilet seat 23 inch, western toilet seat, close coupled and one piece pedestal western seat, cistern (plastic), wasbasin (ceramic/vitreous), stainless steel sink, brass handel valve 1/2 inch, brass handel valve 1 inch

State Government

CTN :41037993

16 Jul, 2025 29.0 Thousand

Kargil - Jammu And Kashmir

Tender For providing/ laying and fitting of pipe line at chanchik of water supply scheme kargil (under reactivation of wss kargil town through gravity including construction of wooden bridge for existing wss kargil town).

State Government

CTN :41030427

26 Jul, 2025 10.16 Lacs

Durgapur - West Bengal

Tender For alternative source of drinking water by installation of submersible pump through rig boring system and laying of 75mm dia. hdpe pipe-line (supplying, fitting and fixing) at rishi aurobindapally within ward no-16, under dmc.

CTN :41011416

24 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of pmw items - cement opc 43 grade , lime unslacked , steel 12 mm dia tmt bar , requirment of upvc pipe 1 inch dia , upvc elbow brass 0.75 inch x0.50 inch , angle cook 0.50 inch , cp bib cook 0.50 inch , upvc tee 0.75 inch , upvc elbow 0.75 inch , connection pipe 0.50 inch , tank nipple 1 inch , ball valve 1 inch , upvc union 1 inch , upvc reducer socket 1 inch to 0.75 inch , female threaded adopter upvc 1 inch , male threaded adopter upvc 1 inch , uovc elbow 1 inch , female threaded adopter upvc 0.75 inch , upvc reducer 1 inch to0.75 inch , taflon tape , pvc waste coupling 40 mm dia , wash basin set , wc european type , urinal plot 11 inch x 11 inch x 15 inch , pvc water storage tank 500 ltr , looking mirror , stainless steel twin type towel holder for bathroom , pvc conduit pipe 20 mm with isi mark 3 mtr length , pvc long bend 20 mm with isi mark , pvc junction box 20 mm four way with isi mark , pvc round or holder or junction plate 4inch , metal flash box 6 module , metal flash box 4 module , plate and frame 6 module , plate and frame 4 module , switch 06a modular isi marked , socket 06a modular isi marked , celling rose legrand nos , mcb sp 10a b type , pvc mcb box 2 way legrand nos , insulation tape 1.8x6.5x0.125 mm , led tube 4 feet 20 watts isi marked , led tube 2 feet 10 watts isi marked , pvc copper wire 2.5 sqmm red roll of 90 mtr , pvc copper wire 2.5 sqmm black roll of 90 mtr , pvc copper wire 2.5 sqmm green roll of 90 mtr , pvc copper wire 1.5 sqmm red roll of 90 mtr , pvc copper wire 1.5 sqmm black roll of 90 mtr , steel screw 1.5 inch black pkt of 50 , cocrete drill bit hss 06 mm , exhaust fan 300 mm , door size 0.90 x 2.15 mtr , ventilator size 2.00 ft x 1.5 ft , cgi sheet 8ft x 3ft 0.63 mm thick , ms square pipe 20x20 mm thickness 2.00 mm , ss hd screw 0.50 inch 100 nos per pkt , cutting wheels 4 inch dia , welding electrode , requirement of wooden scantling size 7 feet x 3 inch x 2 inch , requirement of wooden beading 7 feet x 1.5 inch x 0.50 inch , wire nails 1 inch , wire nails 1.5 inch , wire nails 4 inch , wood primer , oil paint for celling and steel structure , thinner , painting brush 2 inch and 3 inch , stone metal 45 mm , stone chips 20 mm , crushed sand , burnt clay brick size 214 mm x 95 mm , interlocking tiles 6 cm thick of size 0.225x0.1125 m or 0.0253 sqm area per nos

Central Government/Public Sector

CTN :40718529

11 Aug, 2025 NA

Jaduguda - Jharkhand

Tender For corrigendum : spares for pneumatic diaphragm pump, model kdp-250 - spares for pneumatic diaphragm pump, model kdp-250, base screen part no.-dp1, suction manifold with nipple & socket part no.-dp2, d clamp small size with nut & bolt part no.-dp3a, high tensile bolt & nut small size part no.-dps3b, diaphragm outer cover part no.-dp4, diaphragm inner cover threaded part no.-dp5a, diaphragm inner cover hole type part no.-dp5b, valve housing complete part no.-dp6, s s sliding rod with nylock nut & washer part no.-dp7, sliding rod hex nut nylock part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring of valve housing part no.-dpr7c, rubber ring of pressure plate part no.-dpr7d, asbestos packing of valve housing part no.-dpa7e, phosphorous bronze bush part no.-dp8, pressure plate inner hole type part no.-dp9, pressure plate outer threaded type part no.-dp10, csk screw small size part no.-dp11, csk screw big size part no.-dp12, valve box complete part no.-dp13, slide valve part no.-dp13a, end pad part no.-dp13b, circlip part no.-dp13c, rubber ring of end pad part no.-dp13d, allen screw part no.-dp13e, asbestos packing of valve box part no.-dp13f, d clamp big size with nut & bolt part no.-dp14a, high tensile bolt & nut big size part no.-dpb14b, delivery manifold part no.-dp15, exhaust nipple complete part no.-dp16, rubber ball of exhaust nipple part no.-dp16a, steel adopter of exhaust nipple part no.-dp16b, rubber diaphragm part no.-dpr17, rubber ball big part no.-dpr18, rubber valve seat part no.-dpr19, rubber cap of value box part no.-dpr20, strainer foot valve, gi bend with socket 3", gi reducer with nipple 3" x 2 1/2", gi reducer 3" x 2", hose adopter connector set 2", hose clamp 2", hose clamp 3", suction hose pipe 3" x 3 meter long pvc, air line lubricator 1 litre with 2 couplings, bolt & nut high tension part no.-dps3b (small), box valve complete with oil lubricator part no.-dp13, bolt & nut high tension part no.-dpb14b (big), rubber ball big part no.-dpr18, d clamp small size with bolt & nut part no.-dp3a, diaphragm inner cover threaded part no.-dp5a, diaphragm inner cover threaded part no.-dp5b, circlip part no.-dp13c, d clamp big size with nut & bolt part no.-dp14a(set), diaphragm rubber part no.-dpr17, exhaust nipple complete part no.-dp16, manifold suction part no.-dp2, delivery manifold part no.-dp15, screw allen part no.-dp13e, packing asbestos part no.-dpa7e, pressure plate inner. part no.-dp9, pressure plate outer part no.-dp10, packing asbestos part no.-dp13f, ss sliding rubber complete part no.-dp7, rubber ring part no.-dpr7c, csk screw small part no.-dp11, csk screw big part no.-dp12, valve rubber seat part no.-dpr19, spanner allen key part no.-spanner allen key, rubber ball (small) part no.-dp16a, diaphragm outer cover part no.-dp4, base screen part no.-dp1, valve housing part no.-dp6, sliding rod hex nuts part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring part no.-dpr7d, phosphorous bronze bush part no.-dp8, slide valve part no.-dp13a, end pad part no.-dp13b, rubber ring part no.-dpr13d, lubricator part no.-blg30, steel adapter part no.-dp168, end pad puller, nose plier, diaphragm lever, rubber ring puller, diaphargm fitting and opening tools and alu taper bush, base screen part no.-dp1, suction manifold with nipple & socket part no.-dp2, d clamps (small size) part no.-dp3a, high tensile bolt & nut part no.-dps3b, diaphragm outer cover part no.-dp4, diaphragm inner cover (threaded) part no.-dp5a, diaphragm inner cover (hole type) part no.-dp5b, valve housing part no.-dp6, ss sliding rod complete part no.-dp7, sliding hex nut (nyloc) part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring of valve housing part no.-dpr7c, asbestos packing of valve housing part no.-dpa7e, phosphorous bronze bush part no.-dp8, pressure plate inner (hole type) part no.-dp9, pressure plate outer (thread type) part no.-dp10, csk screw (small size)

State Government

CTN :40865119

16 Jul, 2025 15.37 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : improvement /balane work at providing laying fitting hdpe/mdpe pipe line for providing fhtc at wss korzok under jjm.

Central Government/Public Sector

CTN :40997909

29 Jul, 2025 29.00 Lacs

Jamnagar - Gujarat

Tender For special repairs replacement to e/m equipments and infrastructure at af stn jamnagar under ge (af) jamnagar no 1 - supply, installation and testing air cooled inverter based split ac unit with cooling functions and suitable to operate at ambient conditions of (22 deg c + 3 in cooling mode) air conditoner will have following conditons :- (a) refrigerant - r-410 a/r-32 (b) eer- 5 star rating (c) tonnage - 1.5 tr (d) indoor noise level - not more than 40 db (e) filter - as recommended by oem (f) remote - as recommended by oem including 02 nos remote bty (g) temp display, turbo mode and auto swing facility all specification will be as per is-1391 (part 2) and latest amendments as specified as directed by engineer-in-charge., supply, installation and testing air cooled inverter based split ac unit with cooling functions and suitable to operate at ambient conditions of (22 deg c + 3 in cooling mode) air conditoner will have following conditons :- (a) refrigerant - r-410a/r-32 (b) eer- 5 star rating (c) tonnage - 2 tr (d) indoor noise level - not more than 40 db (e) filter - as recommended by oem (f) remote - as recommended by oem including 02 nos remote bty (g) temp display, turbo mode and auto swing facility all specification will be as per is-1391 (part 2) and latest amendments as specified as directed by engineer-in-charge., note for item no 1 & 2 :- the cost of following items deemded to be included in quoted rate.(a) copper pipe duly insulated between indoor/outdoor unit upto lenght 10mtr for each unit (b) ms bracket for outdoor unit duly power coated with fixing arrangement.(c) making of hole in walls including civil work , sleeves and making good to the disturbed surface/wall.(d) testing and commissioning of the air conditioner to the entire satisfaction of engineer in charge(e) pvc round sheathed copper cable of suitable size for connecting indoor and outdoor unit upto supply point as per site requirement (f) taking down of existing ac and deposited to e/m store yard without any damage., supply and installation of voltage stabilzer for automatic operation single phase naturally air cooled indoor type and designed for input varioution between 180v to 250v without voltage stabilzed at 230v with accuracy of (+) 2.5% and capacity 4 kva as specified as directed by engineer-in-charge., supply and installed voltage stabilzer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 180v to 250v without voltage stabilzed at 230v with accuracy of (+) 2.5% and capacity 5 kva as specified as directed by engineer-in-charge., material & labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 sqmm each, pvc insulated, unsheathed, fire retardant, low smoke (frls) drawn through and including pvc casing capping with all necessary fitting and including one run of single core multistranded copper conductor cable, of size 4.00 sqmm, pvc insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified and as directed by engr-in-charge.note: 2 runs of main copper conductor, one run earth wire and pvc casing capping will be measured as one running meter for payment., s&f sheet metal enclosure , 20a single pole and neutral with a two pin and earth plug and socket complete in metal clad board (industrial type) with one single pole mcb 32 amp fixed properly on in concealed position all as specified as directed by engineer-in-charge., supply, installation, commissioning and testing in replacement of loop card having 254 devices of both detectors and modules in a single line circuit, slc supports both class a and class b wiring complete as specified and as directed by engineer-in-charge. make: ravel/honeywell/ceasefire industries pvt ltd, supply, installation, commissioning and testing in replacement of addressable smoke detector with base with binary coded address setting. dual leds for 360 visibil

corporations/Associations/Others

CTN :40966500

19 Jul, 2025 NA

Mehsana - Gujarat

Tender For annual work of supplying goods to the water supply department of kheralu municipality. (2nd attempt) - 6" pvc pipe 6 kg., 5" pvc pipe 6 kg., 4" pvc pipe 6 kg., 2" pvc pipe 6 kg., 2" pvc pipe 6 kg., 1" u.p.v.c. pipe 6 k.g., " u.p.v.c. pipe 6 k.g., " u.p.v.c. pipe 6 k.g., 6" pvc elbow 6 k.g., 5" pvc elbow 6 k.g., 4" pvc elbow 6 k.g., 3" pvc elbow 6 k.g., 2" pvc elbow 6 k.g., 1" u.p.v.c. elbow 6 k.g., " u.p.v.c. elbow 6 k.g., " u.p.v.c. elbow 6 k.g., 6" pvc band 6 k.g., 5" pvc band 6 k.g., 4" pvc band 6 k.g., 3" pvc band 6 k.g., 2" pvc band 6 k.g., 1" u.p.v.c. band 6 k.g., " u.p.v.c. band 6 k.g., " u.p.v.c. band 6 k.g., 6" pvc coupler 6 k.g., 5" pvc coupler 6 k.g., 4" pvc coupler 6 k.g., 3" pvc coupler 6 k.g., 2" pvc coupler 6 k.g., 1" u.p.v.c. coupler 6 k.g., " u.p.v.c. coupler 6 k.g., " u.p.v.c. coupler 6 k.g., 6" pvc tee 6 k.g., 5" pvc tee 6 k.g., 4" pvc tee 6 k.g., 3" pvc tee 6 k.g., 2" pvc tee 6 k.g., 1" u.p.v.c. tee 6 k.g., " u.p.v.c. tee 6 k.g., " u.p.v.c. tee 6 k.g., 6" pvc collar, 5" pvc collar, 4" pvc collar, 3" pvc collar, 2" pvc collar

State Government

CTN :40747709

15 Jul, 2025 25.00 Lacs

Aurangabad-Mh - Maharashtra

Tender For corrigendum : annual rate contract for plumbing sanitary material - upvc pipe (isi mark), , , 1 , 1 , 2 , 2 , upvc cupling (isi mark), , , 1 , 1 , 2 , 2 , upvc reducer cupler (isi mark), 1 x , 1 x , 1 x , 1 x , 2 x , 2 x 1 , 2 x 1 , upvc end cap (isi mark), , , 1 , 1 , 2 , 2 , upvc female adapter brass thred (fta) (isi mark), , , 1 , 1 , 2 , 2 , upvc male adapter brass thred (mta) (isi mark), , , 1 , 1 , 2 , 2 , upvc elbow (isi mark), , , 1 , 1 , 2 , 2 , upvc tee (isi mark), , , 1 , 1 , 2 , 2 , upvc union (isi mark), , , 1 , 1 , 2 , 2 , upvc tank nippal (isi mark), , , 1 , 1 , 2 , 2 , upvc elbow brass (isi mark), , , 1 , 1 , 2 , 2 , upvc female adapter plastic thred (fta) (isi mark), , , 1 , 1 , 2 , 2 , upvc male adapter plastic thred (mta) (isi mark), , , 1 , 1 , 2 , 2 , upvc solution 50 gm, upvc solution 100 gm, upvc solution 150 gm, cpvc make :- first quality isi mark supreme/prince/ashirvad/finolex/astral/ paras, cpvc pipe (isi mark), , , 1 , 1 , 2 , 2 , cpvc cupling (isi mark), , , 1 , 1 , 2 , 2 , cpvc reducer cupler (isi mark), 1 x , 1 x , 1 x , 1 x , 2 x , 2 x 1 , 2 x 1 , cpvc end cap (isi mark), , , 1 , 1 , 2 , 2 , cpvc female adapter (fta) brass (isi mark), , , 1 , 1 , 2 , 2 , cpvc male adapter (mta) brass (isi mark), , , 1 , 1 , 2 , 2 , cpvc elbow (isi mark), , , 1 , 1 , 2 , 2 , cpvc tee (isi mark), , , 1 , 1 , 2 , 2 , cpvc union (isi mark), , , 1 , 1 , 2 , 2 , cpvc tank nippal (isi mark), , , 1 , 1 , 2 , 2 , cpvc female adapter plastic thred (fta) (isi mark), , , 1 , 1 , 2 , 2 , cpvc male adapter plastic thred (mta) (isi mark), , , 1 , 1 , 2 , 2 , 2 , cpvc elbow brass, , , 1 , 1 , 2 , 2 , 2 , 2 , cpvc shooe bend, , , 1 , 1 , 2 , 2 , 2 , 2 , solution, upvc solution 50 gm, upvc solution 100 gm, upvc solution 150 gm, cpvc solution 100 gm, swr fitting, pvc pipe, 1 , 2 , 2 , pvc elbow, 1 , 2 , 2 , 3 , 4 , pvc tee, 1 , 2 , 2 , 3 , 4 , pvc bend, 1 , 2 , 2 , 3 , 4 , pvc coupling, 1 , 2 , 2 , 3 , 4 , swr pipe k, 3 x10 , 4 x10 , plug bend, 3 , 4 , plain bend, 3 , 4 , plain tee, 3 , 4 , plug tee, 3 , 4 , plain y, 3 , 4 , plug y, 3 , 4 , shue bend, 3 , 4 , cupler, 3 , 4 , swr fitting, 3 , 4 , nahani trap 3 , reducer 4 x 3 , r/tee ksr 4 x 3 , pvc solution 100 ml, taplen tape each roll-10 nos., pvc water tank with cover 3 layer coatings (sintex make), with nut bolts & locking arrangements various sizes 500 ltr., 1000 ltr., 2000 ltr., 3000 ltr.500,1000,2000,3000, pvc water tank with cover 3 layer coatings ( supreme/plsto/paras/reno make), with nut bolts & locking arrangements various sizes 500 ltr., 1000 ltr., 2000 ltr., 3000 ltr.500,1000,2000,3000, pvc water tank cover with nut bolt, g.i. bend with socket "b" class, , , 1 , 1 , 2 , 2 , 3 , brass ball valve patti (isi mark) heavy duty, , , 1 , 1 , 2 , 2 , g.i. pipe "b" class, , , 1 , 1 , 2 , 2 , 3", 4", g.i. barrel nipple "b" class, x 2 , x 4 , x 6 , g.i. union "b" class zoloto-make, 1/2", 3/4", 1 , 1 , 2 , 2 , 3", 4", g.i. coupling "b" class, 1/2", 3/4", 1 , 1 , 2 , 2 , 3", 4", g.i. elbow "b" class, 1/2", 3/4", 1 , 1 , 2 , 2 , 3", 4", g.i. tee "b" class, 1/2", 3/4", 1 , 1 , 2 , 2 , 3", 4", g.i. reducer "b" class, " x ", " x 1", 1 " x , 1- x , " x 1- , 1- x 1 , g.i. reducer elbow "b" class, " x ", " x 1", 1 " x , 1- x , " x 1- , 1- x 1 , g.i. bund plug, , , 1 , 1 , 2 , 2 , g.i. tank nipple b class (pvc tank), , , 1 , 1 , house nipple /connecting nipple with nat bolt, 2 , 3 , 4 , hose clamp, , 1 , 1 , 2 , 3 , 4 , stud nut bolt, 6 , 8 , 12 , hdpp pipe (isi mark thick), 1 , 1 , 2 , 2 , 3", 4", rubber sheet, foot ball wisher, 2 1/2", 3 , 4 , 5 , 6 , pvc foot ball, , , 1 , 1 , gland rope, 6 mm, 8 mm, wire rope (tyre) 1 , marking powder white (25 kg bag), hirmunji (25 kg bag), bleching powder (isi mark)(25 kg bag), laboratory sink taps (3 way) cock (isi mark), washbasin bracket 18 , rachi die set 1/2", 3/4", 1" (tapariya/inder/atlas/netco), rachi die set 1 , 1 1/2 , 2 (tapariya/inder/atlas/netco), rachi die set 2 , 2 1/2", 3" (tapariya/inder/atlas/netco), steel sink west couplin

Upvc Elbow Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors