Latest upvc joint Tenders | Government upvc joint Tenders

corporations/Associations/Others

CTN :45445104

12 Jun, 2026 8.31 Lacs

Ghatal - West Bengal

Tender For supply and delivery of electrical maintenance material at ghatal super speciality hospital, district- paschim medinipur. - supply and delivery of recess mounted downlighter with pressure die-cast aluminum heat sink & pc diffuser in white powder coated finish with integral electronic low thd (<10%) led driver 18w recess mounted led down lighter input voltage: 240 v power rating: 18w (make- havells(integraneodlr18wled857s)/ similer to philips/crompton greaves cotton as appoved by eic), supply and delivery of 22watt 4 ft. single t8 led tube light fittings , pmu ps ct no. tmc 502 1xt-led22w with 1 no. master led tube lamp, # make- philips / or equivalent of bajaj/ wipro / cromption [as approved by eic] phillips cat-mas led tube /200mm/8w 865 t85-2100 km) supply and delivery of 18/12 w mas led tube (phillips cat no mas led tube similar wipro / similar crompton/bajaj [as approved by eic], supply and delivery of 230v 6w led circuler down light, ceiling cutout : ø 76mm, make: havells cat no.- vibetrend lrb6w led 865s. equivalent of phillips/ wipro/ crompton as approved by eic, supply and delivery of full glow g6 2'x2' led recessed mounted light, make phillips, model :rc380 led36s-6500 g6 l60w60 psu od s1, make - ip20 with in built phhillips driver or equivalent of bajaj/wipro/crompton as approved by eic., supply and delivery 1200 mm ceiling fan, (make: crompton model: hs plus, colour: opal white make:crompton or similar crompton/ havells / usha as approved by eic, supply and delivery 900 mm ceiling fan, (make: crompton model: riviera, colour: opal white. similar usha/similar orient as approved by eic supply and delivery of new 6/16 a, 2 module, 6 pin, modular socket with shutter, colour -white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic)wbpwd sor k-3, item no-104, supply and delivery of new 6 a, 2 module, 3 pin, modular socket with shutter, colour -white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3, item no-103, supply of new 16a, sp-1 way, 1module, modular switch, colour white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3,item no- 102, supply of new 6a,sp-1 way, 1module, modular switch, colour - white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3, item no-101, supply and delivery of fan regulator, 100 watts- humfree - 0 - 4, step,1 module, colour -white make: anchor(roma)/ similar legrand/ similar havells (as approved by eic), supply and delivery of new modular cover plate, 3 module, with support frame, colour-white make: anchor(tresa)/ similar legrand/ similar havells (as approved by eic) wbpwd sor k-2, 94, supply and delivery of new modular cover plate, 6 module, with support frame, colour-white suitable for matching with the existing one make: anchor(tresa)/ similar legrand/ similar crabtree (as approved by eic)) wbpwd sor k-2, 96, supply and delivery of new modular cover plate, 12 module, with support frame, colour-white suitable for matching with the existing one make: anchor(tresa)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-2, 97, supply and delivery of new plastic surface box, 3 module, colour-white make: anchor/ similar legrand/ similar crabtree (as approved by eic), supply and delivery of new plastic surface box, 6 module, colour-white make: anchor/ similar legrand/ similar crabtree (as approved by eic), supply and delivery of new plastic surface box, 12 module, colour-whitemake: anchor/ similar legrand/ similar crabtree as approved by eic), supply and delivery of 1.1 kv grd. 1.5 sq.mm single core 'frlsh' pvc insulated copper conductor (unsheathed) wire conforming to is 694. (r-180mtrs y-90mtrs b-90mtrs black- 180mtrs) make: polycab/kei/ finolex/ havells (as approved by eic) wbpwd sor k-2, 70, supply and delivery of 1.1 kv grd. 2.5 sq.mm single core 'frlsh' pvc insulated copper conductor (unsheathed) wire conforming to is 694.( r-90mtrs y-

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

CTN :45440000

19 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of miscellaneous item - pvc pipe 110 mm 6 kg per cm2 , pvc pipe 125 mm 6 kg per cm2 , pvc pipe 200 mm 6 kg per cm2 , waste container 1100 ltr for refuse compact , wheel barrow 110 ltr , mobile toilet 6 seater , tricycle with 6 dustbin 20 ltr , excavator engine capacity 20 bhp 3 cylinder 1500 rpm bucket capacities with locking

CTN :45253959

12 Jun, 2026 NA

Halisahar - West Bengal

Tender For corrigendum : supply of isi marked,pvc insulated,unsheathed flexible cord twin twisted with copper conductor 750 v grade conforming to is:694 - 2010 with amendement no.1 september 2012.the copper conductor shall conform to is:8130/1984(first revision),reaffirmed 2001of size:0.50 sq. mm.(16/0.20 mm). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45427048

18 Jun, 2026 139

Channarayapatna - Karnataka

Tender For procurement of water supply pvc,upvc,cpvc materials and pump motor materials - volatage meter, prevender, motor for open well 1 hp, motor and pump 7.5hp 15stage, motor 5hp 10stage pump, end connection for hdpe- iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, gi thread end cap 0.5 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi coller 2 inches- iso certified, gi coller 0.75 inches- iso certified, gi elbow 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi tee 0.5 inches- iso certified, gi union 3 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, motor auto starter, amphere meter, pump and motor auto starter, gi union 2 inches- iso certified, gi tap 0.75 inches- iso certified, gi tap 0.5 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, gi 2 nrv- iso certified, gi elbow 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi elbow 0.75inch- iso certified, gi collar 0.75 inch- iso certified, gi nipple 0.75 2feet - iso certified, gi nipple 0.75 1feet - iso certified, gi nipple feet 2 inch- iso certified, gi bend 2 inch- iso certified, axcel blades- iso certified, gi collar 2 inch - iso certified, gi clamp set bore cap, complete panel board items, gi pipe 2 inches class b , alluminium wires 20sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 6sq.mm - iso certified, panel board - iso certified, starter 7.5hp - meco, submersible cabel 10sq 3 core , submersible cabel 6sq 3 core , submersible cabel 4sq 3 core , motor and pump10hp 20 stage, item name - hdpe pipes (pe100-pn6.0) 63mm dia conforming to is 4984-2016, item name - ef reducer coupler 90mm x75mm, item name - ef reducer coupler 75mm x63mm, item name - elctro fusion elbow 125mm, item name - elctro fusion elbow 110mm, item name - elctro fusion elbow 90mm, item name - elctro fusion elbow 75mm, item name - elctro fusion elbow 63mm, item name - elctro fusion coupler 125mm, item name - elctro fusion coupler 110mm, item name - elctro fusion coupler 90mm, item name - elctro fusion coupler 75mm, item name - elctro fusion coupler 63mm, item name - ef reducer coupler 125mmx110mm, item name - ef reducer coupler 110mmx90mm, item name - ef reducer coupler 90mmx75mm, item name - ef reducer coupler 63mmx50mm, item name - ppr fusing machine, item name - electro fusion machine, item name - hdpe mta 20mm, item name - hdpe mta 90mm, item name - hdpe mta 75mm, item name - hdpe mta 63mm, item name - ms flang 2.5inch, item name - 50mm dia air valve, item name - elctro fusion tee 125mm, item name - elctro fusion tee 110mm, item name - elctro fusion tee 90mm, item name - elctro fusion tee 75mm, item name - elctro fusion tee 63mm, item name - hdpe flange 20mm, item name - hdpe flange 90mm, item name - hdpe flange 75mm, item name - hdpe flange 63mm, item name - hdpe pipes (pe80-pn6.0) 20mm dia conforming to is 4984-2017, item name - hdpe pipes (pe80-pn6.0) 90mm dia conforming to is 4984-2016, item name-gi union 2 inch, item name-gi tee 2 inch, item name-gi coller 2 inch, item name-rinch spanner adjustable 8 inch, item name-rinch spanner adjustable 10 inch, item name-rinch spanner adjustable 12 inch, item name-taparia screw driver, item name-taparia cutting player, item name-axel blad, item name-pvc tap, item name-pvc pipe 75mm, item name-pvc pipe 1 inch, item name-pvc pipe 1.5 inch, item name-pvc pipe 2 inch, item name-pvc elbow 75mm, item name-pvc elbow 1 inch, item name-pvc elbow 1.5 inch, item name-pvc elbow 2 inch, item name-pvc caller 75mm, item name-pvc caller 1 inch, item name-pvc caller 1.5 inch, item name-pvc caller 2 inch, item name-pvc fta 75mm, item name-pv

Central Government/Public Sector

CTN :45454439

16 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of wash basin outlet drain pipe (pvc) near door way to icf drg. no.gs2-6-3-204col.i alt.n/3 item nos. 13,15,17,18,19 & 20 [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45424678

15 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of pvc insulated cable for railway signalling heavy duty under ground unscreened armoured with galvanised round steel wire and the conductors of plain solid annealed high conductivity copper each with nominal cross section area of 1.5 sqmm conforming to specn no.irs-s-63/2014 (rev 4.0) or latest. size 24 core x 1.5 sqmm. [ warranty period: 30 months after the dateof delivery ][quantity tolerance (+/-): 2 %age , item category : special (signaling cables) , total po value variation permitted: not applicable ] ]

Central Government/Public Sector

CTN :45436261

19 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For pvc support for 11 watt cfl to drg. icf/std-7-6-023, alt-f, item no.8 (one sample shall be approved before bulk supply) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45437365

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of 12 core 2.5sq mm copper pvc insulated flexible cable as per as per is: 694: 2010 (with latest amendment), technical specification as enclosed. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45422443

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For flexible poly vinyl chloride (pvc) flooring sheet in rolls of size: 1620 mm width x 14 meter long of 2 mm nominal thickness. conforming to rdso spec.no. rdso/2006/cg-12(rev.1 of aug-2008) read with all amendments, with latest amendment slip no. 4 of august 2018 and corrigendum -01 ofjune-2015. colour as per rdso approved sample code - acflg-01. note: firm should supply suitable pvc welding electrode of length 45 metre per roll. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Upvc Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector