Latest upvc pipe laying Tenders | Government upvc pipe laying Tenders

State Government

CTN :45444431

15 Jun, 2026 4.53 Lacs

Godhra - Gujarat

Tender For provision of electrical connection for installation of equipments for smart warehouse project at fsd godhra - supplying of xlpe insulated & pvc tape innersheathed aluminium conductor armoured cable of 1.1 kv grade of 2 x 6 sqmm size confirming to is:7098 (part- i) 1988 with up to date ammendment as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size up to 35 sq. mm (clamped with cable tie/strip clamp) size on wall / steel pipe surface as required., supplying and making end termination with brass compression gland and aluminium lugs for 2 x 6 sq. mm (19mm) size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.

CTN :45428058

18 Jun, 2026 10.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates for construction material supply - inviting rates for construction material supply, random rubble masonary complete below plinth 1;6, random rubble masonary complete above plinth 1;6, pcc m-20 as per requirement, hard murrom with spreading, rcc work m-20 below plinth in all size and shape excluding reinforcement and shuttering, rcc work m-20 above plinth in all size and shape excluding reinforcement and shuttering, m-40 grade pavers 80mm thick in any colour and shape as per standard specification, m-40 grade pavers 60 mm thick in any colour and shape as per standard specification, plants 1.50m long as per requirement, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. hume pipe1200 mm dian.p.-3, r.c.c. cement pole2.40 m hight, r.c.c. cement pole3.0 m hight, plaster 1;6 12 mm thick below plinth, stainless steel febrication work with fixing labour charge, pcc m-10 as per requirement, collapsible shutter with all fitting (steel), tape 15 m, tape 30m, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 16 to 18 mm thick granite stone of any colour and shade, rcc bench 3 seater as per specification, modern architectural work by rcc in any shape and size all complete, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick complete as per specification, providing and laying cement concrete m20 grade work with required & equipmentlabour, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing ply 19 mm thick, providing and fixing mica sheet complete, laying of ceramic glazed wall tiles 300x300 mm all complete, statue colour paint complete, pvc pipe 3 inch dia 4kg/cm2, pvc pipe 4 inch 4kg/cm2, cc cutting and disposal of rubbish material, supply of water through tanker 3000 liter in any area of ulb, wpc door including fixing

CTN :45419096

13 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 4p 160a mccb , 4p 250a mccb , sitc of new dpt mcc main panel , shifting fixing of new dpt m , sitc of fp 200 mm junction box , flp wp lighting distribution , shifting fixing of flp light , sitc of flp 63a 5p plug sock , sitc of on off flp push butto , supply of flameproof 90w led , supply of 60w 230v ac led f , installation of 60 90w led w , sitc of galvanized gi perforat , sitc of 100 x 50 x 2mm hot dip , supply laying of 450 x 75 x , supply fabrication erection , providing pipe electrode type , sitc of 50 x 6mm hot dip galva , sitc of 25 x 3mm hot dip galva , supply and laying of 4 sqmm co , supply and laying of 16 sqmm c , supply laying of 16 sqmm cab , supply of 3c x 2.5 sqmm ug arm , supply of 5c x 2.5 sqmm ug arm , supply of 4c x 6 sqmm ug armou , supply of 3.5 core x 185 sqmm , supply of 4 core x 95 sqmm frl , supply of 4 core x 50 sqmm frl , sitc of 3c x 2.5 sqmm ug armou , sitc of 5c x 2.5 sqmm ug armou , shifting laying of 4c x 6 sq , shifting laying of 3.5c x 18 , shifting laying of 4c x 95 s , shifting laying of 4c x 50 s , supply of flame proof flp dc g , supply of flame proof flp dc , glanding termination of flp , glanding termination flp dc , supply fixing of flameproof , supply fixing of heavy duty , skilled electrician provided f , excavation , breaking of pcc , breaking of rcc , pcc m 20 , rcc m 20 , reinforcement steel

State Government

CTN :45413511

10 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay set lt i.e. d

Central Government / Public Sector

CTN :45417356

17 Jun, 2026 10.30 Lacs

Panipat - Haryana

Tender For annual rate contract for supply and installation of electrical items and services at padc, panipat - electrical arc padc panipat 1st year, excavation of earth for cable / pipe laying for electrical work excavation of earth for cable trenches / laying of g.i. pipes for cable work in all types of soils including saturated soil upto a max. depth of 1.5 metres including shoring, strutting and bailing out of water (if necessary), backfilling and compacting in layers not exceeding 20 cm. thick to the finished ground level and disposal and dressing of excess earth within a lead of 50 metres all complete with labour and materials as per standards, drawings, specifications and directions of engineer-in-charge., 200 mm x 25 mm x 2 mm, supplying and fixing of gi route marker suppplying cable route marker with 10 cm x 10 cm x 5 mm thick gi plate with inscription thereon, bolted/ welded to 35 mm x 35 mm x 6 mm angle iron, 60cm long and fixing the same in ground as required. job includes painting with one coat of redoxide and finishing paint., 3 / 3.5 / 4 x 25 sqmm, 3 / 3.5 / 4 x 50 sqmm, 1.5 sqmm, 2.5 sqmm, 4 sqmm, 6 sqmm, 10 sqmm, 16 sqmm, 20 sqmm, 25 sqmm, 35 sqmm, 16 sqmm, 25 sqmm, 35 sqmm, 50 sqmm, 10.0 to 16.0 mm, 16 sq. mm, 65 mm dia 3 metre long, 25 x 5 mm gi strip, 64 kg charcoal and 5 kg salt, 100 amps., 63 a tpn 4 way, 5 to 32 amp, 40 amp, double pole, triple pole, triple pole and netural, four pole, 16 amps., 30 ma, 63 amps., 30 ma, 63 amps., 30 ma, 10 a spn. mcb industrial socket outlet supplying and fixing 10 amps., 240volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 10 amps. c curve, sp,mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 20 a spn. mcb industrial socket outlet supplying and fixing 20 amps., 240volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps, c curve, sp,mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 20 a tpn mcb industrial socket outlet supplying and fixing 20 amps., tpn, industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps, c curve, tp mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. note: isi marked sockets shall be used., 2 + 4 way, provide shock hazard chart supply and installation of shock hazard chart as per ie rules 1956 (clause-44) complete with frame and glass including necessary clamps, bolts, rawl plugs, etc. breachking and making good the wall if required. all complete with labour and materials as per the direction of engineer-in-charge., provide caution board at sub-station supply and installation of "caution boards" mv-200 mm x 150 mm / hv- 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.at sub-stations as per is2551/upto date including supply of necessary clamps, nuts, bolts and other hardware. all complete with labour and materials as per the direction of the engineer-in-charge, upto 5.5kw, plug- 2 pole+ earth, 250v- 20 amp, plug- 3 pole+ earth, 440v- 20 amp, red / yellow / amber / green / milky white leds, blue led, 1 way 5 / 6 amps. piano type switch with isi mark, 1 way 15 / 16 amps. piano type switch with isi mark, 2 pins 5 / 6 amps. penta flush socket outlet, 3 pins 5 / 6 amps. penta flush socket outlet, piano type 5 pins 5 / 6 amps. socket outlet, 3 pins flush type 15 / 16 amps. socket outlet, flush type 6 pins 6 / 16 amps. uni. socket outlet with isi mark,

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

Central Government And Public Sector

CTN :45388693

11 Jun, 2026 2.36 Lacs

Calcutta - West Bengal

Tender For supply of supply of 1.5 tr inverter type 5 star rated split air- conditioner unit , installation, testing and commissioning of the split ac unit , supplying and fixing extra copper pipe line , supplying and laying 4 core 2.5 sq. mm pvc insulated and pvc sheathed flexible copper cable , supplying and fixing of powder coated ms frame stand , supplying and fixing of 20 mm dia heavy duty pvc pipe with accessories for drain water connection , supplying and laying of pvc insulated and pvc round sheathed, 3 core ,2.5 sqmm, 1.1kv copper cable , supplying and fixing dp sheet steel enclosure on surface or recess along with 25,32a 240v

CTN :45371722

30 Jun, 2026 20.00 Lacs

Damoh - Madhya Pradesh

Tender For inviting rate for construction material as given in the list for the financial year 2026-27 - inviting rate for construction material as given in the list for the financial year 2026-27, hard murrom with spreading, course sand sand, fine sand barman sand, crusher stone duststone dust, 06 mm metal crushed. metal, 12 mm metal crushed. metal, 20 mm metal crushed. metal, 40 mm metal crushed. metal, 90 mm metal crushed. metal, bricks (local)9 x 4 x 3, r.c.c. hume pipe300 mm dian.p.-3, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. cement pole2.40 m hight, wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, winding wire, iron chamber/drain grill (complete spot fitting with labour), corrogated g.i. sheet0.63 mm0.63 mm, cement o.p.c. isi markisi mark 50kg beg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, putty double coat with finishinglabour, roller machine with diesel & operetor, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 25mm thick kota stone, 16 to 18 mm thick granite stone of any colour and shade, vetrified tiles60 x 60 cm 10mm thick 15:15622, glazed tiles300 x 300 mm 10 mm thick 15:15622, tiles / marble fitting labour charge, pvc floor carpet, w.c. 580 x 440 mm with footrest & p-trap with fittingodisa petarn, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick ordnory cement, m.s. tube steel frame febrication work including all fitting labour charge, m.s. angle steel frame febrication work including all fitting labour charge, providing and laying cement concrete m20 grade work with required & equipmentlabour, aluminium fram work complete (glass/acp sheet/grill), jcb machine with diesel and operetor, hydra machine with diesel and operetor, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, wall painting with plastic emulsion paint of approved paint, removing white or colour wash by scrapping and sand papering complete, distempring with oil bound distamper water proof paint complete, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq mm including cutting the patches in propper shape, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing ply 19 mm thick, providing carpentar for furniture work, providing and fixing 60 mm thick paver block 30 n/sqmm, brick masonary work with open bhatta complete, water proofing treatment on roofs of slab by asian paint, indigo, etc with water proofing compound 3 layer with crakseal, putty, labuar complete, pvc pipe 3 inch dia 4kg/cm2, pvc pipe 3 inch dia 4kg/cm2 elvo

Upvc Pipe Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector