Latest upvc pipe repair Tenders | Government upvc pipe repair Tenders

State Government

CTN :45539294

19 Jun, 2026 11.24 Lacs

Delhi - Delhi

Tender For repair maintenance of outfall of b-block shastri nagar by providing laying ms pipe 450mm dia. at outfall near 56 biga park near najafgarh drain in sadar bazar constituency ac-19 under ee(c)-13 (re-invite).

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

State Government

CTN :45525191

15 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of replacement/repair of eroded ms plates, bracing pipe, ms angles, channels, beams of aph outlet flue gas duct in unit-8, cstps during aoh.

State Government

CTN :45521176

18 Jun, 2026 10.24 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of pwd road under sub division-2, division-c and nd-road dg. 2026-27. (sh - providing and laying ms pipe through open cut / trenchless method of hakikat nagar pump house).

CTN :45519531

13 Jul, 2026 40.00 Lacs

Guna - Madhya Pradesh

Tender For supply of water supply pipe line hand pump bore well repair anf repairing material under np raghogarh - water supply materiasl, cid joint 80mm dia class 15, cid joint 100mm dia class 15, cid joint 80mm dia class 10, cid joint 100mm dia class 10, ci sluse valve 50mm dia heavy duty, ci sluse valve 80mm dia heavy duty, ci non return valve 50mm dia heavy duty, rubber packing sheet, nut bolt all size, ci flang 50mm dia heavy duty, ci flang 80mm dia heavy duty, threst plate, acp pipe 150mm dia class15, hand pump rod socket 12 mm, hdpe pipe 75mm dia pe100/10kg, starter oil p, gi pipe 32mm dia with socket class b heavy duty 5 kg/rmt, gi pipe 50mm dia with socket class b heavy duty 8 kg/rmt, gi socket 50mm dia seamless, gi socket 50mm dia, gi bend 50mm dia, gi clamp 50mm dia 150mm length, main switch 63 amp., main switch 100 amp., gi nipple 50mm dia 100 mm length, gi redeuser 50mm x 75mm, copper cable 3 core 16 sqmm (falcon or finolex make), bore cap 6 inch, bore cap 8 inch, gi end cap 2 inch, gi end cap 3 inch, submerciable moter pump single phase 3 hp 160m., gi elbow 2 inch, gi elbow 3 inch, gi/ci t 2 inch, gi/ci t 3 inch, cpbc pipe heavy duty 16mm dia, handle hand asembly compleate, padestanal heavy duty, water chamber, ci cylender heavy duty (deep well), upper valve assembaly compleate, check valve assembaly compleate, ms rod 3m - 12mm, hexagonal nut bolt, chain nut bolt, chain with cupler, handle excell, bearing 6204 heavy duty\, naitril washer, leather washer, rubber sealing ring, uppor valve guide seat, submercible motor pump 15 hp motor 12 stage pump (falcon /texmo/cri or equelent make), starter 1 hp to3 hp switch penal, starter 10 to 15 hp delta, control penel board oil starter 20 to 35 hp (two button), control penel board oil starter 20 to 35 hp (trhee button), rubber ring 80 mm, rubber ring 100 mm, auto switch 7 wire semi, 9 wire wth, pvc cable 3x4 sqmt standard make (falcon /finolex or equlent make), pvc cable 3x6 sqmt standard make (falcon /finolex or equlent make), copper cable three core 16sqmt standard make (falcon/finolex or equlent make), nariyal rassa, pvc rassa, teflon tap, clamp 1/2 ", clamp 1 ", clamp 1 -1/4", clamp 2", clamp 2-1/2", clamp 3", black roll pipe 3/4 ", black roll pipe 1", black roll pipe 1-1/4", tala 50mm, tala 60 mm, tala 75 mm, penchkas, plaash, pipe rinch 12 ", 18" & 24", 7/16 coper wire, 1.5 coper wire, 1" over flow footwall, 63 a. kit kat, 100 a. kit kat, 63a. m.c. b. for pol, 100a. m.c. b. for pol, 125a. m.c. b. for pol, 1 hp open well moter ci body, over head tank 1000l.

CTN :45518119

19 Jun, 2026 5.87 Lacs

Delhi - Delhi

Tender For repair maintenance of drinking water plant installed at ahq vayu bhawan new delhi. (sh: providing services of ss/ms welder and ss pipe work at different locations at ahq vayu bhawan.)

CTN :45484588

18 Jun, 2026 3.78 Lacs

Kamrup - Assam

Tender For supply of replacement of existing ms iron plate of driver cabin upper side of pbs of size 15 ft x 2 ft and thick 6 mm. , replacement of existing 02 x glass of crew cabin. , supply and fixing 1 x exhaust fan for kitchen room. , supply and fixing of 04 x iron net for air wind pipe of outer side. , supply and fixing 1 x ac dc panel. , supply and fixing of 26 x 5 amp socket. , supply and fixing of 36 x led tube light. , supply and fixing of 09 x switch board with 5 amp. , replacement of existing 06 x navigation light with glass protection. , replacement of existing rotary pump of pbs as per existing specification. , repair of leakage defect of pt pump of sbs. , replacement of existing 02 x iron battery box as per existing specification including all charges. , replacement of existing fuel tank of aux engine generator as per existing specification.

CTN :45475418

15 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

Central Government/Public Sector

CTN :45466892

16 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] rprg,duct 55.000 to,[2] disman,fab,str 54.000 to,[3] chng,tube of roof 162.000 m,[4] rprg of receiving chute 11.700 to,[5] disman,pipe,manhole 27.000 ea,[6] disman,fab&ern,damaged str 54.000 to,[7] disman,pipe,ms 7.200 to,[8] ern of pipe,ms 7.200 to,[9] rprg of brg housing 68.000 ea,[10] remove & fix cross beam 32.000 le,[11] rprg,car frame 50.000 ea,[12] rprg of platform 14.400 to,[13] ern,bottom stiffeners of ladle 27.000 to,[14] ern,damaged shell of ladle 23.400 to,[15] ern,top shell complete 22.500 to,[16] rprg,trunion of hot metal ladle 11.700 to,[17] rprg,brick retainers in ladle 36.900 to,[18] disman of concrete 32.400 m3,[19] fab,stand,rack,bin&fencing 18.000 to,[20] ern,stand 18.000 to,[21] disman of damaged str 13.500 to,[22] align,cross travel gearbox&mtr 1.000 ea,[23] streng&fixg,side guard plate 9.000 to,[24] disman,co gas pipe 5.000 to,[25] disman,roller,end stopper housing 2.000 to,[26] fitg,trunion by wldg&finishing 4.000 ea,[27] chng,chrgng spout w/bend plate 18.900 to,[28] dism/fab/ere shell of ldl 22.500 mt,[29] dismantl of recup from bottom shell 15.000 mt,[30] rprg,ladle supporting str 11.250 to,[31] rprg,converter shell 27.000 m2,[32] testing of optical fiber cable 4.000 ea,[33] ultrasonic testng, repaired steel ladle 4.000 ea,[34] rprg,pouring out spout shell plate etc 5.400 to,[35] changing nut,bolt&screw f/centrifuge r20 41.000 ea,[36] ern of steel/slag car main beam etc 9.000 to,[37] fitg,trunion by wldg&finishing 12.000 ea,[38] rprg,brg housing 13.000 ea,[39] ern,cage bracket,link etc 11.250 to,[40] repair,str frame 22.000 to,[41] align,g/box mtr&base 10.000 ea

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

Upvc Pipe Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector