Latest upvc pipeline laying Tenders | Government upvc pipeline laying Tenders

Corporations/Associations/Others

CTN :45707227

14 Jul, 2026 30.00 Lacs

Multi City - Karnataka

Tender For annual laying of pipe line for dring water in cmc madanayakanahlli limits

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

State Government

CTN :45711419

03 Jul, 2026 1.96 Lacs

Ananthnag - Jammu And Kashmir

Tender For maint of of pipe d.s, trunk mains and sub mains by way of replacement of damaged ones with all items/ fittings (by way of laying fitting of distribution network for providing water supply t.u.c hbtns / hhs of ymrch n khnpra under m and r

State Government

CTN :45709240

03 Jul, 2026 3.92 Lacs

Ananthnag - Jammu And Kashmir

Tender For laying fitting of main and distribution pipe line for providing water supply to doctor colony and other uncovered habitations and extension of raw water main of rsfp village nillow wss nillow under ut capex

State Government

CTN :45676988

30 Jun, 2026 7.46 Lacs

Bhiwani - Haryana

Tender For badhwana: estimate for renovation of existing structures and laying the balance pipe lines in village badhwana district charkhi dadri. balance work of repair and renovation at water works badhwana and all other works contingent thereto.

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45675633

01 Jul, 2026 1.09 Crore

Kullu - Himachal Pradesh

Tender For restoration of rain damages for various wss under jal shakti sub division neether in nirmand block distt. kullu (h.p.) (sh:- providing laying jointing and testing of g.i. pipe 15 mm dia (lc) = 2200 rmt., 20 mm dia (lc) = 4050 rmt., 25 mm dia (lc) = 11950 rmt., 32 mm dia (lc) = 5450 rmt., 40 mm dia (lc) = 6950 rmt., 50 mm dia (lc) = 850 rmt., 65 mm dia (lc) = 2200 rmt. for restoration of water supply schemes i.e. lwss nc/pc hab. of gp shilli gamog lot durah, add. source to wss tandi kafta, wss pc hab. katour seri, wss keori bakta, ninbai, wss palli sharvi, wss rathi nallah, wss seridhar tandi lahral, wss tandi kafta, wss janglabeel jharla, wss manjugaad lagouni, wss latog bagidhar, wss moin, wss nichly shirty dhamah, wss shamoh jagerh, wss sharidhar and wss kuther buai kutal.). under pdna.

State Government

CTN :45675639

01 Jul, 2026 31.31 Lacs

Kullu - Himachal Pradesh

Tender For restoration of rain damages for various wss under jal shakti sub division anni in anni block distt. kullu (h.p.) (sh:- providing laying jointing and testing of g.i. pipe 32 mm dia (lc) = 4500 rmt., 25 mm dia (lc) = 1800 rmt., 20 mm dia = 4600 rmt., and 15 mm dia (lc) = 1250 rmt. for restoration of water supply schemes i.e. wss parkot kamand, wss lajheri, wss kirtwa kohila, wss khadvi kafti, wss buchair and wss to village jaon). under pdna.

State Government

CTN :45695609

02 Jul, 2026 61.15 Lacs

Chamba - Himachal Pradesh

Tender For restoration of rain damages to various water supply schemes in various gps. under jsv. sub division holi in tehsil holi distt chamba (h.p) under pdna 2023(sh:-providing, laying, jointing and teating of gi pipe (screwed & socketed) of various dia at various rds)

State Government

CTN :45675637

01 Jul, 2026 78.11 Lacs

Nirmad - Himachal Pradesh

Tender For -restoration of rain damages for various wss under jal shakti section bagipul in jal shakti sub division nirmand block nirmand distt. kullu (h.p.) (sh:- providing laying jointing and testing of g.i. pipe 20 mm dia (lc) = 3300 rmt., 25 mm dia (lc) = 9550 rmt., 32 mm dia (lc) = 5950 rmt., 40 mm dia (lc) = 3540 rmt. and 50 mm dia (lc) = 2350 rmt. for restoration of water supply schemes i.e. wss nore thanthal, wss bagipul, wss bari lanj urtoo, wss chail distribution, wss daman tharla, wss darati bijli shamani, wss jhalair, ghs bagipul, wss l/o rahnoo phase-ii & iii, wss l/o sarahan phase-ii & iii, wss nore manjhwa, wss rahnu, wss sarli godsa tirmidhar and wss urtoo barilang khalair.). under pdna.

Upvc Pipeline Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors