Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels
Tender For procurement of chemical laboratory equipments & spares - test sieves 300 microns, standard test sieves without any joint, test sive of size 50mm, test sieve of size 15mm, test sieves - 212 microns, benzoic acid pallet, cotton thread for ika bomb, hydrometer sp.gr. 1 to 2.0 make- tarson, petri dish-with lid-100 x 15mm borosilicate, petri dish with lid 50 x 12mm s line (3165) borosil, measuring cylinder -1000ml, pipette - measuring - 10 ml, pipettes 1 ml, whatman fltr paper no.40, 11cm, filter paper whatman, spatula-6 inch, tissue paper rolls 1, hydrometer(0.95-1.0), hydrometer (0.9-0.95), hydrometer(0.85-0.9), vm silica crucible with lid
Tender For supply of chemicals required for district laboratory nuh and hiring of analyst and peon on monthly basis for sub division laboratory phesd f.p jhirka - supply of 3 place manifold part(accessory for manifold filtration assembly) used for bacteriological testing (bt) 3 place manifold with ss 316 with ptfe valve make: axiva, glassco, merckmillipore, borosil , supply of inverter tubular type battery 150 ah make: exide, livguard, supply of manifold filtration assembly used for bacteriological testing (bt) branch - 6 place assemblies with high efficiency, high sensitivity and fast filtering speed funnel capacity- minimum 300ml. filth pore size -minimum 20 m funnel material all ss 316 within built ss clamp and ss lid glass or ss316 with external ss clamp and cork capacity 250 ml vacuum flask 2l capacity valve - ptfe base holder stainless steel 316l, autoclavable-121 c (15min.) membrane filter 1 pack (100 no.) as per requirement /0.45 m pack of 100 with all accessories, flask, connectors vacuum pump: air vent filter-hydrophobic ptfe(flow rate should be 19l/min. motor speed -1400 rpm, max vaccum-100 mbar) should be of latest technology and highest quality. make: pall lifesciences, merck millipore, borosil, labotronics, athena, axiva, glassco , supply of patri dish for microbiological testing (total coliform, ecolie)
Tender For procurement of hospital consumables items - adhesive tape (width 5 cm x length 5 m), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (2 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (5 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use. central luer slip, ribbon pack (10 ml), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (6.5 ’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7.5’’), infusion set, eto sterile, non-pyrogenic, non toxic, single use, 1 ml ± 20 drops (per ml d.w)needle size 21/g gravity feed only (standard), blood administration set, sterile, non toxic, non-pyrogenic , gravity feed, dehp free, single use only, 20 drops of distilled water equivalent to 1 ml ± 0.1 ml (1g ± 0.1 g) (standard), pulse oximeter (handy), display – oled/ lcd, battery- 3v : 2aaa, spo2 measuring range – 35% to 100%, accuracy - ± 2bpm or ± 2% (standard), nasal oxygen catheter , 2 m long multichannel kink resistant tube with extra soft medical grade nasal tips, sterile, non-toxic, single use (standard), accu-sure blood glucose test strips , no-coding system, accu-sure blood lancet, sterile, round (100 units pack), urinecollection bag with top outlet & non-return valve, disposable, non-toxic, non-pyrogenic, single use, capacity – 2000 ml (adult), oxygen mask, sterile ,soft, flexible, medical grade, star lumen, for single use (adult), nebulizer mask, with aerosol mask (elastic strap) 2 meter long multi channel tubing, sterile single use (adult), latex examination gloves, powdered, non-sterile, ambidextrous, single use (large size), disposable surgical 3 ply face mask, anti allergic, fluid resistance, optimal comfort high particle filtration (adult), disposable surgical cap, sterile, medical grade, spandex and polyester elastic, (adult), i.v cannula with injection port & wings, 20g, 1.1 x 32mm, 61ml/min (standard), i.v cannula with injection port & wings, 18g, 1.1 x 32mm, 61ml/min (standard), cannula fixator, extra strip for additional adhesion (standard), round spot band-aid , material – cloth, adhesive (l x w x h = 50 x 80 x 45 millimeters), urinecollectioncontainer, sterile (60 ml), enema kit for adults, reusable & washable, polyvinyl chloride make (1500 ml), clot activator blood collection tube, vacuum, medical grade pet, transparent, 4.0 ml, clot activator coated on the inner wall to accelerate clotting, pre-sterilized & disposable (13 x 75 mm), k3 edta blood collection tubes, vacuum, medical grade pet, 2ml, transparent, pre-sterilized & disposable (13 x 75 mm), sodium fluoride blood collection tube, vacuum, medical grade pet, transparent, 2.0ml (13 x 75 mm), prothrombin time collection tube, vacuum, medical grade pet, transparent, 2.7ml tubes, pre-sterilized & disposable (13 x 75 mm), biomedical waste carrying bag colour – blue/yellow/red/black non chlorinated bis -9738 certified polymer made, biomedical waste bag thickness minimum 120 micron and manufacturer details should be printed on the bag. the bag should be leak proof and the bmw bag must include one cable tie. all bags are to be customized with biohazard symbol, preprinted as per wbpcb norms (size – 65 cm (b) x 80 cm (l) for 50 litre), biomedical waste bin – colour – blue/yellow/red/ black, high density polyethylene (hdpe), 50 ltr capacity, weight – 3.5 kg (approx), all bins are to be customized with biohazard symbol (dimension (l*w*h) 415 x 425 x 615 mm (approx.), electric needle cutters , weight-0.3kg to 2 kg, power consumption- 60w-100w, burning temperature-16000c, abs plastic body with stainless still, removal drawer for waste collection (dim