Latest vacuum controller Tenders | Government vacuum controller Tenders

Central Government/Public Sector

CTN :45264914

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

State Government

CTN :45224439

08 Jun, 2026 7.79 Crore

Varanasi - Uttar Pradesh

Tender For supply of fully automatic double door steam sterilizer eight stu five hundred seventy five to six hundred lts including all required civil electrical and plumbing work , free standing ultrasonic washer with irrigation including all required civil electrical and plumbing work , fully automatic cart and trolley washing system with accessories including all required civil electrical and plumbing work , automatic sealing device for flexible endoscopes including all required civil and electrical work , cssd management tracking traceability and remote supervision software system , wash station with two sinks including all required civil electrical and plumbing work , magnifying lamp , pass box , control and packing table with two shelves , working table , fresh linen storage rack , free standing basket rack , closed transport trolley , washer and drying gun , documentation labeler , ro system with water tank and pressure pump including all required civil electrical and plumbing work , office table , staff chair , visitors chair , storage cupboard , waste bin pedal operated ss , computer system , change locker four compartments , turnkey work complete with all accessories as per technical specifications which include all civil electrical plumbing works or any other work as required , comprehensive annual maintenance contract threeyear for sl no one to twenty three , comprehensive annual maintenance contract four year sl no one to twenty three , comprehensive annual maintenance contract fiveyear sl no one to twenty three , comprehensive annual maintenance contract six year sl no one to twenty three , comprehensive annual maintenance contract seven year sl no one to twenty three , comprehensive annual maintenance contract eight year sl no one to twenty three ) /bid number : gem/2026/b/7549954 * /dated: 16-05-2026 & & / bid document 1 / 26

CTN :44263421

15 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - 63 unit control heating, electronic altimeter, arm 62t self contained servo unit rudder installation, relay box 66, relay box 024, left pilot additional speaker, fire extinguisher, kursmp.70 control panel, csd turbine, actuator, fixture, control unit, tape transport mech block, tank unit, pump booster(v), bulb - temperature (v), semi automatic parachute release unit, v trailing edge inner wing (l h), te vane inner wing flap rh sec 2, outer wing flap rh, pipe exhaust, shutter, fuel oil heat exchanger, auto start control, receiverbsi-3k-7, sweep unit, power unit, input information, receiver(av2.026.004.2.03 sp), unit, valve eletro hydraulic, low frequency unit, monitor auto pilot (v), oxygen mask, gear distributive, device(yam2.087.067-01), pannel, switch - power failure, memory block, magnetic recorder, rectifier unit, pcb,y-5, pcb,y-6, differential switch (pressure), sensor

CTN :44705174

11 May, 2026 2.00 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of 67 types of cardiac stents and consumables for inhs kalyani through pa - conclusion of price agreement for 67 in number items for cardiac stents, pacemakers, etc for a period of two years at inhs kalyani - drugs and consumables, combo device (implantable cardiovertor defibrillator + biventricular device) - complete with accessories, dual chambetr automatic implantable cardiovertor defibrillator - complete with accessories, angiography surgical disposable table drapes sterile, angioplasty kit (insertion tool, y adaptor and torque device), coronary guide wire - nitinol core - hydrophilic coated (floppy, moderate or extra support), coronary guide wire - stainless steel core - hydrophilic coated (floppyt, moderate or extra support), ecg electrodes (disposable), high pressure 3 port manifold, inflation device (indeflator) kit for angioplasty, judkins left angiography catheter - assorted sizes, judkins right angiography catheter - assorted sizes, syringe leur lock polycarbonate construction for use with sclerosants etc, 10 ml, permanent pacemaker dddr, complete with temporary pacing lead, permanent pacemaker vvir, complete with temporary pacing lead, ptca balloon dilation catheter - rapid exchange - assorted sizes, ptca balloon dilation catheter - rapid exchange, high pressure (extended range) - assorted sizes, ptca guide catheter - judkins - assorted sizes, ptca guide catheter - speciality curves - assorted shapes and sizes, ptfe angiography guide wire 0.035 x 150 cm j tip, ptfe angiography guide wire 0.035 x 260cm extra stiff, ptfe angiography guide wire 0.035 x 260cm j tip, radial hardware, rapid exchange cutting balloon - assorted sizes, rapid exchange thrombus aspiration catheter system, special curve angiography cathters (amplatz, multi-purpose, ntr etc) assorted shapes and sizes, temporary bipolar pacing catheter - assorted sizes, 5f/6f radial angiography catheter, 6f long sheath 55 cm, 6f radial sheath, 7f long sheath 55 cm, angioseal, c-arm cover (2 pcs for top and bottom) compatible with ge igs 320 cathlab system, c-arm cover (3 pcs for complete "c") compatible with ge igs 320 cathlab system, coronary angioplasty kit, coronary balloon with flexible microsurgical blades, coronary guidewire silicon coating over the spring coil with extra support, coronary guidewire slip-coat (coating over polymer jacket) with excellent lubricity and trackability in tortuous vessels (tapred tip), coronary guidewire slip-coat (coating over the spring coil) with greater tip flexibility and support, coronary micro catheter system, dedicated kit for radial angiography, drug elluting coronary balloon system (paclitaxel elluting), ecg paper a4 size for tmt test compatible with moratara x-scribe system and hp laserjet 103a (pack of 500), everolimus drug eluting cobalt chromium cornary stent-assorted sizes, everolimus eluting balloon mounted platinum chromium coronary stent system - assorted sizes, everolimus eluting cobalt chromium coronary stent system for long lesion upto 48mm, femoral sheath 6f 11 cm, femoral sheath 7f/8f/10f 11 cm, guideliner (5f/6f/7f), high pressure cto balloon with low crossing profile (diameter 0.85mm) assorted sizes, hp laser toner cartridge for hp laser 103a, icd single chamber mri, low tip profile micro catheter with torque control, micro puncture set, post sterilization cardiology gown with sterile towel, semi complaint ptca balloon catheter with corrugated surface and low profile wig shape design (sizes 1.0 mm to 1.5 mm), sirolimus drug eluting cobalt chromium biodegradable polymer coated with hybrid open cell, double helix stent assorted sizes, sirolimus eluting coronary balloon system, surgical angiography drapes with open for radial and femoral access, terumo angiography guide wire 0.035 x 150 cm j tip, ultra high pressure nc balloon upto 45 bars dual layer with lesion entry profile of 0.16 and crossing profile of 0.026, zotarolimus eluting balloon expandable cobalt alloy coronary stent s

CTN :45063157

23 May, 2026 NA

Netanar - Chhattisgarh

Tender For supply of elevator ece cch256 door bottom shoes , elevator ece cch256 ecm121 control card , elevator ece transformer 690v , elevator ece smps 24v , elevator ece pcb bmo , elevator ece door drive motor , elevator ece v3f drive to door , elevator ece ecm121 arl 300 , elevator ece car display 7 segme , elevator ece landing display 7 s , elevator ece ir screen , elevator ece open belt car door , elevator ece cch256 car guide shue 16mm- , elevator ece pgb2 card , elevator ece g7a403 vvvf unit-30kw g7-4 , elevator ece make brake resistance 35r , elevator ece make ard set automatic r , elevator ece make over load device , elevator ece make cabin header - c4 pa

CTN :44144488

24 Apr, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of lv1r72 175. 53. 018. 1 ring labyrinth , lv1r72 229-0642sb winter sweeping device lh 527 08 70 0606 , lv1r72 bm349. 0630. 615 automatic circuit breaker azr-20a , lv3r72 3304-08-11 piston oil control ring std 3304-08-11 , lv1r72 172. 45. 344 shaft torsion

Central Government/Public Sector

CTN :44959080

12 May, 2026 NA

Ranga Reddy-T - Telangana

Tender For tender for supply of insourcing of 37 types of pcb assemblies : : -mode switching device uvr-12 , bright ness control device urya-36 , pcb , pcb , board , board , board , board , board , board , pcb , pcb , servo actuator amplifier , device for transformation of signal , signaling and checking , digital signal corrector tsks-25 , signaling logic device uls-27 , servodrive amplifier , board , board , secondary power supply source ive-1 , signaling logic device uls-27-01 , front tail computer vpo-59-02 , air parameters computer vvp-60-02 , longitudinal channel control , lateral channel control computer , automatic tuning computer vap-63-0 , nonredundant function computer , nozzle control computer vus-65-01 , ground control device unk-66-01 , logic device for adjusting ulr-67- , sensors signals computer vsd-69-01 , servodrive amplifier , nozzle servo drive amplifier uss-5 , servodrive amplifier us-20-01 , combined unit bk - 02 , safety device

Central Government And Public Sector

CTN :44631331

23 Apr, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of supply and delivery of elevator controller with variable frequency drive and automatic rescue device refer attached technical specification , supply and delivery of motor and controller with vfd for automatic door operator suitable for retrofitting of existing motor refer attached technical specification , supply and delivery of door sensor for automatic lift doors infrared type refer attached technical specification , supply and delivery of elevator lop landing operating panel with two buttons refer attached technical specification , supply and delivery of elevator lop landing operating panel with one button refer attached technical specification , supply and delivery of elevator copcar operating panel for 4 floor lift material stainless steel refer attached technical specification , supply and delivery of elevator cop car operating panel for 6 floor lift refer attached technical specification , supply and delivery of elevator cop car operating panel for 9 floor lifts refer attached technical specification , supply and delivery of lift travelling cable for power and signal controlling between travelling car refer attached technical specification , supply and delivery of lift hoist way control cable for signal controlling between lift control panel refer attached technical specification. , installation and commissioning of elevator controller with vfd item 1 automatic door operator motor and controller refer attached technical specification

Central Government/Public Sector

CTN :44913947

07 May, 2026 NA

Koraput - Odisha

Tender For supply of 20-10279-vacuum controller, multi channel, maxigauge, communication port facillity , 20-10280-sensor/gauge cables ( 1 set= 5 nos) , length 30 meters each. , 20-10277- pirani gauge, model- tpr 270, range: 1000-1* 10^ -4 mbar, mod n0- ptr 26 770 b, supply 15-30 , 20-10278-pening gauge, type- ikr 251, no- ptr 25500, f no-44970751, 15- 30vdc

Central Government And Public Sector

CTN :44807756

22 Apr, 2026 NA

Lumding - Assam

Tender For at hji-design, supply, installation, testing and commissioning of a passenger lift of 14 passengers (952 kg) capacity for g+1 floors (approx. 10 m travel), machine : gearless with permanent magnet motor located in the shaft at the top as per rdso specification no:rdso/2013/em/spec/0016 (rev '2'')-2025, complete with all associated electrical, mechanical and civil interface works and accessories, including 1.0 m/s vvvf drive, automatic centre-opening doors (minimum clear opening 700 - 2000 mm), car height 2400mm, finished floor height 2600 mm, pit depth 1600 mm and headroom 5000 mm; equipped with traction machine suitable for 952 kg load with 8-19s fibre-core self-lubricating ropes, guide rails, buffers and complete hoisting/suspension system; microprocessor-based monoblock control panel with closed-loop control, safety torque-off, automatic rescue device (ard), fireman operation, overload protection, emergency alarm/light and all mandatory safety features as per rdso spec; stainless-steel car with led lighting, ventilation fan, handrail, voice announcement system, vandal-resistant cop & lop with digital indicators; including all cabling, earthing, testing, commissioning, statutory clearances and handing over, along with 2 years comprehensive warranty covering all parts, labour and service. cost includes free maintenance of two years during warranty of lift as per rdso spec no.rdso/2013/em/spec/0016 (rev'2') - 2025 make-johnson/otis/schindler/omega elevators /techno industries or equivalent. [ warranty period: 24 months after the date of delivery ]

Vacuum Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector