Latest vacuum gauge scrap Tenders | Government vacuum gauge scrap Tenders

CTN :45416452

22 Jul, 2026 2.42 Crore

Rohtak - Haryana

Tender For corrigendum : rate contract for 02 years( extendable) for purchase of various types of consumables for department of aneaesthesiology, pgims, rohtak- heat & moisture exchange filters (hmef): hepa bacterial and viral fi with hme properties offering optimum hydrophobic filtration performance. gas sampl port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.ev pleated filter medium to allow maximum filtration efficiency with minimal resistance flow. low dead space, not more than 45-55 ml. single use, sterile ece/usfda/iso/ , heat&moisture exchangers (hme) filter for pediatric us , recommended tidal volume <600ml.low weight. low dead space. suitable for b ventilated and spontaneously breathing patients. low resistance to flow. corrugated pa medium with high efficiency to recover about 75% of the energy and moisture. single sterile. ece/usfda/iso , heat & moisture exchangers (hme) for spontaneous breathing in tracheostomized patients. suction port to allows access to suct , catheter. clear housing to allow visualization of contamination. integrated oxygen port allow delivery of supplemental oxygen. recommended tidal volume range from 1000ml.compact and lightweight. corrugated paper medium device can be used fo maximum period of 24 hours. single use sterile. minimum resistance anti occlus mechanism. ece/usfda/iso , epidural set. a set containing tuohy's epidural needle minimum length 80m 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and th lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, fill area approx 4.91 cm², priming volume 0.75 ml all connections should be of luer lock ty lor(loss of resistance) syringe, presterilized. ece marked/usfda approved , combined spinal epidural set. containing 18 g touhy epidural needle minimum 80 mm length. pencil point, spinal needle with twist lock system, marking tuohy's needle hub and depth marking on tuohy's needle hub containing correspond clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss resistance) syringe. ece marked/usfda approved - , needle for spinal anaesthesia, quincke type, same colour coding the hub and stylet, presterilized. usfda and europen ce approved- , (a) 23 g, 90mm length od approx 0.64 mm, , (b) 24g,90mm length od approx 0.5mm with/without introducer , (c) 25g, 90 mm , (d) 26g, 90 mm , (e) 27g, 90mm , paed. spinal needle without introducer, colour coded length 50mm, g, od 0.5 mm, presterilized. usfda and europen ce approved , cuff manometer: allows controlled initial cuff inflation. intermittent press monitoring facility. instant visual confirmation of intra-cuff pressure. simple operation pressure adjustment without need for disconnection or introduction of syringe into syst solid green zone indicates usual cuff pressure range for tracheal & tracheosto tubes.connecting tube is supplied with the gauge for convenient positioning. portable ga and clips easily into pocket. , face mask- clear, reusable, pvc material, transparent for good visibil adjustable cushion for better comfort. , sizes:- , a) 0, , b) 1, , c) 2, , d) 3,0) 4,1) 5- , anatomical facemask made up of antistatic inflating pad, malleable, anatom. chaned to give precise seal and fit comfortably, sizes 1.2.3.4 , disposable lma with preformed curve 90 degree like ilma with airwa tube with standard connectors for anaesthesia circuit. us fda approved. sizes 1, 1.5,2, 2.5,3,4,5 , resuable pressure infusion bag for administration of fluid to patient unde pressure, compatible with 500 ml fluid bags, flexible, stury, pvc tubing and manometer stop cock and hand pump, latex free , clear pressure- monitoring lines, which can withstand pressure up to 500 psi with minimal damping, non kinkable, pre-sterilized, disposable, id/ed1/2 mm. length 100 cm, 150cm & 200 cm. low dead space but pe may be optional

CTN :45698399

08 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of fuel gauge asm (this is a safety item) as per drg.no. 8383728 alt ea as per specn. specification for cleaning,marking and packing , misc-437 [ warranty period: 30 months after the date of delivery ]]

Central Government And Public Sector

CTN :45710685

04 Jul, 2026 1.25 Lacs

Bokaro - Jharkhand

Tender For fabrication and installation of gauge posts, painting and marking on gauge posts and bridge piers and construction of mtbm , tbm at river banks of various sites under udsd tenughat

Central Government And Public Sector

CTN :45710683

04 Jul, 2026 3.96 Lacs

Dhanbad - Jharkhand

Tender For installation mtbm, tbm, rcc gauge post and painting/marking of gauge on bridge pier/gauge post at various sites under ubsd, cwc, maithon

Central Government And Public Sector

CTN :45710682

04 Jul, 2026 1.69 Lacs

Bardhaman - West Bengal

Tender For painting and marking on gauge posts/bridge piers/abutments and establishment of temporary bench mark (tbm) at various sites under mdlbsd,cwc, durgapur in fy 2026-27

Central Government And Public Sector

CTN :45675776

04 Jul, 2026 2.90 Lacs

Jammu - Jammu And Kashmir

Tender For installation of gauge posts, painting/marking of gauge posts, retro reflective sign sheets, boards for sites under northen sub-division-ii under chenab division, cwc jammu.

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

State Government

CTN :45661367

13 Jul, 2026 30.00 Lacs

Mandala - Madhya Pradesh

Tender For supply of store/parishable materials - measuring tape 2 m (as per standards set by the department of legal metrology), measuring tape 5 m (as per standards set by the department of legal metrology), measuring tape 10 m (as per standards set by the department of legal metrology), saw, 1.5-meter size (peg tooth saw) (1500mm x 140mm x 2.0mm x 1.6mm), 14 gauge, 63 teeth, weight: 2.50 kg, saw, 1.8-meter size (peg tooth saw) (1800mm x 140mm x 2.0mm x 1.6mm), 14 gauge, weight: 3.00 kg, triangular rasp (file) 200 mm, flat rasp (file) 200 mm, setting bar (chapras) – as per sample, jute rope with red stripe (25 mm), red paint (4-liter pack), green paint (4-liter pack), black paint (4-liter pack), aluminium paint (4-liter pack), aluminium paint (20-liter pack), jet marking ink, jet marking pen, jet marking pen wick, oil-wax chalk, lump lime (in sack) (35 kg pack), lime powder (in sack) (35 kg pack), red ochre lumps (in sack) (25 kg pack), chalk clay/whiting (in sack) (25 kg pack), nylon rope 25 mm (by kg), digit set (stamps/punches 0 to 9)

corporations/Associations/Others

CTN :45656443

03 Jul, 2026 67.45 Lacs

Multi City - Karnataka

Tender For design, supply & installation of spillway gates opening marking, sailent feature boards at main entrance, dam gauge level marking and block number markings at narayanpur dam

CTN :45643346

05 Aug, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of modified air flow filter with regulator (prv) with 1/2 bsp with both side adopter ( bd x bd) & (bd x 1) connector, with rounded plunger and thermo plastic piston to give 0.1 to 0.2 kg/cm2 pressure drop along with pressure gauge marking at 2.5 to 3.5 kg/cm2. model rfrsmr-4 size-1/2 bsp.make-siemag [ warranty period: 30 months after the date of delivery ] ]

Vacuum Gauge Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

State Government

corporations/Associations/Others