Latest vacuum lifter scrap Tenders | Government vacuum lifter scrap Tenders

Central Government/Public Sector

CTN :41596971

23 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n

Central Government / Public Sector

CTN :41693312

25 Sep, 2025 NA

Nanded - Maharashtra

Tender For supply of mobile lifting platform capacity (2000kg) specification as per attached annexure

CTN :41649653

16 Sep, 2025 NA

Bangalore - Karnataka

Tender For supply of 82650001 lifting & swiveling platform to pts: gr/td/6972 d dt 03.06. 2025 , 82650001dlp-(lifting & swiveling platform) -2 year , camc-15yrslift & swivel platform -1au

State Government

CTN :41675066

17 Sep, 2025 NA

Multi City - Multi State

Tender For supply of recumbent bikes (q3) , upright bike (q3) , commercial air bike (q4) , spin bike (q3) , lat pull down (version 2) (q3) , cable cross over (version 2) (q3) , seated calf raise machine (q4) , multi adjustable bench (v2) (q3) , dumbbell rack (q3) , rubberized weight dumbbells (q3) , rubberized weight plates (q3) , weight lifting set (v2) (q4) , barbell rack (vertical barbell holder) (q4) , flooring for gym (q4) , heavy duty commercial treadmill , commercial elliptical trainer , commercial air rowing machine , leg curl or leg ext , abdominal or back ext , power rack or smith machine , bumper plate rack for weight liftting floor , compitition bar men , compitition bar women , weight lifting platform , hip thruster , technique box set , soft playo box set , metal playo set , fractional change discs , powder stand pro

Central Government/Public Sector

CTN :41589795

25 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For supply of 7 ton lifting platform electrically operated

Central Government/Public Sector

CTN :41576120

15 Sep, 2025 12.98 Lacs

Kharagpur - West Bengal

Tender For supply, installation, testing and commissioning of extra material for installation of unitary acs in different departments /centers/schools, office etc. at iit kharagpur, kharagpur (phase i). - "supply, installation, testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for split ac system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specifications etc. as required :note: wall opening and making good to the damages.", "6.4 mm (¼"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "9.5 mm (⅜"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "12.7 mm (½"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "15.86 mm ( ⅝"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "19 mm (¾"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", interconnection electrical copper cables from indoor , outdoor & electrical control panel complete with 4 core 2.5 sqmm copper frls insulated cable(isi marked) with cable tie & clamp etc as required., supply & installation m.s epoxy painted fabricated stand for different size condensing unit with vibration isolators, grouting, for complete platform type stand for outdoor unit having safety railing etc as per site requirement., supply & installation of upvc drain pipe (isi marked) with 6mm thick nitrile rubber insulation from idu - 25mm dia, 40 mm rigid upvc drain pipe (isi marked) with 6 mm thick nitrile rubber insulation complete with fittings, u traps etc. & as specified to the nearest toilet with required civil works & finishing the same., supply of r-22 gas for top up, supply of r-32 gas for top up, supply & installation of good quality wooden frame (2" x 2") thick required for window ac installation, supply & installation of 16amps plug top (isi marked), supply & installation of 100mm pvc trunking with snap on trunking (isi marked), "supplying and installing following size of perforated hot dipped galvanised iron cable tray with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended fromthe ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.", 100 mm width x 50 mm depth x 1.6 mm thickness, 225 mm width x 50 mm depth x 1.6 mm thickness, 300 mm width x 50 mm depth x 1.6 mm thickness, installation, testing & commissioning of the window ,split acs ,cassette ac supplied by department. price shall be inclusive of installtion upto 3mtr of refrigerant pipe, drain pipe and cable., window acs, split acs, cassette acs, tower acs, reinstallation, lifting, shifting of existing ac units (split & window acs & cassette ac)., window acs, split acs, cassette acs, tower acs, dismantling of existing ac (split ac / window ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (cassette ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (tower ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, buy-back of existing unserviceable ac (split ac / window ac/cassette ac) units(all type) including all copper pipes, drain pipes mounting surfaces, etc. complete. the item shall be quoted as negat