Latest vacuum packaging machine Tenders | Government vacuum packaging machine Tenders

CTN :43818313

12 Feb, 2026 NA

Darjeeling - West Bengal

Tender For supply of xlpe cable for working voltages up to and including 1. 1 kv as per is 7098 (part 1) (q2) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3) , mcb - miniature circuit - breakers for a. c. operation as per is / iec 60898 (part 1) (q2) , pvc copper cable single core and multi core circular sheathed cord with flexible conductor (v2) as per is 694 (q2) , led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5) (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , tri colour led column light fitting 3. 0 mtrs height with die cast aluminium pipe housing with cylindrical polycarbonate diffuser designed ip 65 protection including base plate. , cp centre hole basin mixture , steel kitchen rack 36 x36 x 10 inches , shower rose pvc 15mm with arm , cp pillar cock swan neck , cp wall mixture 15mm brass , sluice valve 80 mm , ppr pipe 90mm , ppr pipe 160mm , ppr pipe 63mm , ppr pipe 32mm , ppr pipe 40mm , ppr pipe 25mm , ppr union 40 mm , ppr equal tee 110mm , ppr union 50 mm , ppr elbow 50 x 40mm , stop cock pvc 15mm female thread , pvc pillar cock swan neck , grating cp round 125mm , pbs roll tarfelt 1 x 20mtr , looking mirror of size 48 inch x 20inch x 5mm thick , shailac lakh dana golden colour , aviation light 60w , ss plate rack 36inch x 24inch x 10inch , ppr pipe 75mm , ppr pipe 110mm , ppr pipe 50mm , cane plastic half round 4mm thick , rubber shoe with screw for chair dining table dining chair writing chair easy peck table teapoy wooden and centre table , pvc seat cover for ewc white ) /bid number: gem/2026/b/7140116 * /dated: 02-02-2026 & & / bid document1 / 32

CTN :42287005

06 Feb, 2026 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of vacuum packaging machine (q3)

CTN :43683593

04 Feb, 2026 NA

West Tripura - Tripura

Tender For corrigendum : supply of socket outlet flush type 6 amp , street light made of pressure die cast housing with toughned glass ip 66 protection 110 lm or w 25 watt , street light made of pressure die cast housing with toughned glass ip 66 protection. 100 watt , switch single pole piano type 06 amp , recess mounting luminarige 34 w ceiling fitting separate electronic driver high brightness smd , call bell ding dong , lt underground xlpe insulated screemed pvc bedded armoured electric cable heavy duty 1100 volt grede isi alumn conductor 3 core 10 sqmm , multi core round pvc insulated pvc cable 1. 5 sqmm copper conductor three core , poly cab flexible cable 3 core 1. 5 sqmm , pvc copper cable 1. 5 sqmm 1 core , pvc copper cable 1 sqmm 1 core , pvc insulated multi standard single core cable with copper conductor 1100v of size 4 sqmm , pvc almn cable 2. 5 sqmm 1 core , pvc cable 1. 5 sqmm copper conductor twin core , pvc cable almn conductor 1. 5 sqmm 1100v s or c , pvc copper cable 2. 5 sqmm 2 core , pvc copper cable 4 sqmm 1 core , pvc copper cable 4 sqmm 2 core , pvc insulated multistrand single core f or r cable with copper conductor 1100v of size 1 sqmm , pvc insulated single core sheathed with solid cable 4 sqmm with alumn cable conductor , pvc insulated two core sheathed with solid cable 4 sqmm with alumn cable , cable jointing kit 11kv 95 sqmm 3 core out door , campact switch disconnector fuse unit of current ratting ac 32 amp 2 pole 415 v , capacitor 4 mfd , change over switch 100 amp tpn 415 v with sheet metal enclose , decorative type led fitting 18 watt 6000k , drop out copper tinned barrel fuse element of capacity 20 amps 11 kv , heating element 1500 watt p type , led lamp 18 watt 419mm ultra bright pl l 4 pin stright line pin , pl l lamp led 18 watt , plug top outlet 15 amp 3 pin , plug top outlet 5 amp s or t , pressure die cast alluminium road way lumanaries led light fitting 60 watt , pvc adhesive tape 20 mm x 10 mtr long , pvc adhesive tape 20mm 25 mtr long , pvc board 4x4 inch , pvc board 4x7 inch , pvc board 8x10x2 inch , pvc casing caping 25mmx 2 mtr , pvc insulated twin twisted copper conductor flexible wire with copper conductor of size 23 or 0. 0076 , rccb having ip 20 protection 6 or 10 ka breafing cap with scpo current rating 63 amps sensitively , sheet metal enclouser with two pin and earth plug with 20 amp spn mcb , star delta starter for 25 hp motor fully automatic contractor size 32 over load relay , star delta for 15 hp motor. , switch socket combination 15 amp box type , switch socket combination 3 pin 5 amp , switch socket combination 6 pin 6 or 16 amp , accessories for exhaust fan 300 mm sweep but ventilator lower shouter , adjustable sleaves for refrigerator 286 ltr , adjustable sleaves for refrigerator 300 ltr , compressor for refrigerator 300 ltr , compressor for water cooler 300 ltr , exhaust fan motor for water cooler 1 or 5 hp 25w , fan blade for refrigerator , fan motor for deep freezer , gas refrigerant r 134 450 gm bottle , gas refrigerant r 22 , heating element 230 v 2 kw triangle type , ice tray plastic , lead connection for geyser 600 mm as per sample , running capacitor 45 mfd for water cooler , running capacitor for ac 50 or 60 mfd 230 volts 50 hz , thermostate switch for window type ac 1. 5 or 2 ton cap 230 v 50 hz , cotton waste , lead pig , lead wool , nipple gi 40mmx100mm , non return valve 100mm dia with gm working parts , pvc water tank 500 ltr , rubber tubing for joint leakage , sodium carbonate for water treatment , tee gi reducer 40mmx20mm , aluminium aldropsliding bolt 250 mm length rod and 16 mm 4 socket , aluminium door //bid details2 / 122handle 100mm , aluminium door stoper with rubber shoe length with cover plate 140mm , anti termite treatment , ceiling rose , fill roofing bitumenious in roll of 1 mtr x 20mtrlong type iii grade i , glass pane clear or frosted 3mm thick , glass pane clear or frosted 5mm thick , hydroulic door closer , m seal , ms or steel handle for steel w

State Government

CTN :43754834

05 Feb, 2026 14.10 Lacs

Delhi - Delhi

Tender For supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - sitc of front loading washing machine with loading capacity of 30 kg dry weight per charge heavy duty , electrically heater inner basket & outer drum stainless steel, micro countroller base cyclic timer for auto- reserve, auto- timer & auto digital temperature control, water- inlet valve drain valve complete with control panel, & electric motor for wash, driver through pulleys & v- belts and control panel operator on 3ph, 415 v, 50 hz, a.c. supply operation cycle 30 to 40 mintutes complete connection etc as required, sitc of hydro extractor machine direct- driver self- balance with automatic electromangnetic dc injection brake system having capaciy of 30 kg per charge with auto -timed top loading vibration less innner basket and outer drum stainless steel complete with specially designed electric motor and control panel operator on 415 v,3 phase , 50 hz ac supply . operation cycle 5 to 10 mintes complete connection etc as required., sitc of drying tumbler machine front loading open pocket, electrically heater with loading capacity of 30 kg . per charge complete with micro controller base cyclic timer for auto timed & auto - reserver, auto digital temperature control, fitted with control panel , one motor each for driver and blower double walled glass wool insulated outer body mild steel with inner basket stainless steel, self lint screen , v belt driver waster air exhaust etc operates on 415 v, phase 50 hz ac supply . operation cycle 40 to 60 mintes complete connection etc as reqd, supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.a) 3 x 4 sq. mm, b) 6 x 4 sq. mm, supplying and fixing of following capacity, 240/415 volts, 10ka/15ka c series mcbs suitable for lighting and other loads of following poles in the existing mcb db complete with connection, testing and commissioning etc as reqd.a) 40a, 10 ka , fp mcb (415v), b) 63a, 10 ka , fp mcb (415v), supplying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size complete as required.a) 4x 16 sqmm, b) 4x 25 sqmm, supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 c to 40 c, internal surge protection of 2.5 kv with short & open circuit protection, thd 10%, p. f. 0.95, ip20, cri >80, flicker free, (flicker shouldbe below 5 %), life time (led, driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 120 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body (thickness > 1.20 mm)a) 40 watt, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in th

CTN :43714353

27 Jan, 2026 NA

Vadodara - Gujarat

Tender For supply of materials for electrification work in different buildings of vadodara municipal corporation. - supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, thd < 15%, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 % ( fitting required lm-79 & lm-80 certificates)(note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown.)(a) tube light with integral driver(iii) 20 watts, surge - 2kv,ip-20, conventional 4 feet. sor no.: 2-15-1. cat iii. make : philips/ wipro/osram, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (1) 6 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (2) 16 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (3) 6/16amp. universal socket. sor no.: 1-2-7. make : anchor woods/ legrand, supplying upvc mini trunking (pvc casing-n-capping) having doublelocking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc/resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . (1) 20 mm. sor no.: 1-3-5 , providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (4) 6 a socket. sor no.: 1-2-7. make : anchor woods/ legrand, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(a) 2 wire 1.5 sq. mm. sor no.: 1-4-1(e). make : polycab/kei/finolex, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(b) 2 wire 2.5 sq. mm. sor no.: 1, supplying flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(e) 1.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5. make : polycab/kei/finolex, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(h) 2.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5.make : polycab/kei/finolex, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (1) one no single pole 6 a switch. sor no.: 1-6-1. make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (2) one no 3/5 pin 6 a socket. sor no.: 1-6-1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (5) one no single pole 16 a switch & one no 6/16 a universal socket combined. sor no.: 1-6- 1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate)

Central Government/Public Sector

CTN :43589914

02 Feb, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of vacuum packaging machine (q3)

Corporations And Associations And Others

CTN :43719375

04 Feb, 2026 4.75 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng

State Government

CTN :43661403

09 Feb, 2026 3.00 Lacs

Multi City - Chhattisgarh

Tender For tender for various material - supply of 50 watt led street light in warrn white colour with pressure die cast housing with toughened glass and individual leds with secondary optics and ip 66 protection. make: - bajaj/wipro/klick/crescent/osram led vance , lt brass stud 12x185 mm (for 63kva & 100kva xmer) , lt brass stud 12x185 mm (for 63kva & 100kva xmer)

CTN :43655592

10 Feb, 2026 NA

Jamalpur - Bihar

Tender For supply of single solenoid valve with solenoid coil (5 port 2 position). model-mfh-5-1/8, type of actuation- electrical (mechanical spring re-set). material housing-aluminium-die cast, with 24v dc adaptor, make -festo, duncon, nucon. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :43596909

04 Feb, 2026 2.00 Lacs

Multi City - Chhattisgarh

Tender For 75 watt and above led street/yard light in cool daylight colour with pressure die-cast housing with toughened glass and in deciduas led with secondary optics and ip 66 protection.make- bajaj/wipro/philips/crompton/havells

Vacuum Packaging Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others

State Government

State Government