Latest valve chambers Tenders | Government valve chambers Tenders

CTN :44771181

13 Apr, 2026 93.4 Thousand

Bilaspur (Hp) - Himachal Pradesh

Tender For restoration of rain damages of lwss kot malhot in tehsil jhandutta distt. bilaspur (h.p) ( sh:- providing and fixing of ms wheel valve chambers at various locations) under pdna

State Government

CTN :44760531

11 Apr, 2026 4.21 Lacs

Adityapur - Jharkhand

Tender For connecting two 100mm pipeline and construction to 150mm pipeline and construction of sluice valve chambers under bagbera housing colony water supply, d. w. and s. division adityapur

Central Government/Public Sector

CTN :44698679

09 Apr, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, as directed

Central Government/Public Sector

CTN :44715987

09 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, as directed by o.a. , overhauling of valves up to d

CTN :44736039

13 Apr, 2026 NA

Nasirabad - Rajasthan

Tender For supply of lub oil filter 232v12 , element pre fuel filter , element micro fuel filter , o ring sprs , set of hoseclips td or v12rc , flex pipe , flexpipe 1800mm , oilseal 78 100 12 , restriction indicator , fuel off solenoid isolated 24v , stud m10 , flex hose assy 840mm lgpoint , intrmdt flngd bellow , radiator pre mix greaves kool 10 lit , complete set of o rings 6g11ta genset , set of hoses for 6g vave , oil sump for 6g marine , hard washer for cylinder head bolt , swivel bolt 6g11 , tension bolt 6g11 , washer m8x1point5 , plain washer , flanged bolt m8x1point25x25 8point8 , adaptor m16x1point5 m12x1point5 , paper insert oil centrfug , injector f002c8z972 6g11 , centrifugal oil cleaner 6g11 , turbo oil supply pipe 6g11 teflon , exh bellow iml , hexbolt m8x1point25x40 8point8 or cl , hex nut m16x2point0 cl or 10 , spring washer m 16 , gasket exh silencer , cupointwasher , cupointwasher 1point5mm , banjo screw m10x22 , adaptpoint turbo in m14,m16 , adaptpoint turbo in m18,m22 , pdc rocker cover , gasket, t or c oil drain , gasket, for pdc rocker cover , wtr seppoint with priming 450lph m16 tap , tappet 14 hp and g series , piston assembly , connpointrod and cap asslypoint , cylinder liner neck rolled 108 bore , o ring, liner , main bearing g11 , con rod brg set leon , thrust washer crpointshaft top , thrust washer c or s bottom , plastic spout with oring and adaptor , valve stem seal , valve guide finish , exhaust valve all g series , inlet valve all g series , repair kit 105292001477 or 478 , assly plastic a or mnifold , integrated rocker assembly 14 hp , set of flexible fuel pipe , pipe, fip oil supply , ss v band 79 mm diapoint , thermostat element , hp pipe set 6g cpcbii , leak off pipe , set of piston rings for vave , gasket cylinder head victor , hexscrew m16x2point0x45 cl8point8 , hexnut coprpointplated m8 10g , hexpoint nut m10 cupoint coated , banjo screw m14x1point5x31lgpoint , banjo bolt din 7623 , copper washer , bolt, cylpoint head m14x150 , oilseal 130 160 12 , stud m10x50l 10point9cl cu coated , primary af element , air filter element safety 12 xrb12 , water pump 4g concentric design , greaves lub oil ci4 20 ltr pack , cogged belt ax49 1258l , set of gaskets 6g11ta he , oil pump 4g or 6g , non marine after cooler , air filter assly cpt 12 xrb12 , water return pipe , packing sheet , anabond , amc visit for 06 nopoint fire engine montly visits , breakdown visit for fire engine , material delivery charge work shop material up and down , after cooler servicing and recondtioning including gasket , heat exchanger cooler servicing and recondtioning including gasket , con rod reconditioning , fip pump calibration at work shop , injecor calibration at work shop , cylinder head reconditioning at work shop , turbo charger servicing , service charge for engine d check , aligment between engine and fire water pump

Central Government/Public Sector

CTN :44747340

15 Apr, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of repair kit for auto drain valve consisting of 9 items (item no.2,3,7,12,15,17,&22-1 no.each,item no.6-2 nos.,item no.13-4 nos.of rdso drg.no.sk.dp-4070) drg.no.rdso drg.no.sk.dp-4070 ]

Central Government/Public Sector

CTN :44667703

10 Apr, 2026 NA

Mumbai - Maharashtra

Tender For procurement of of spares of patriot make crane for mh asset - seal oil sl, o ring, o ring, o ring, seal oil sl, o ring, o ring, o ring, o ring back up, o ring, o ring back up, o ring, hose assembly, hose assembly, hose assembly, main aux hydraulic pump, boom pump, swing pump, anti 2 block system (for main & aux)-hyd, fleeting sheave, slew system high pr.filter, slew pump, bushing- lever housing, lever arm-dog, retaining plate, brake band assembly, sheave for pendant block boom hoist, pin sheave 31/2" dia 24" long for pendan, actuator stub plate, pin sheave 31/2" dia for main frame, nyloc washer 4" od, nyloc washer 4" od 31/2"id and 1/8" thic, kit directional control valve, main/ aux hydraulic pump, boom hoist & swing pump(a tandem unit), check valve, gear coupling ( pump drive adapter), regulator valve, hydraulic oil cooler, repair kit of 4 way 3 position tandem, repair kit of rp70 pilot operated relief, repair kit of 4 way 3 position tandem, repair kit of 4 way 3 position tandem, joystick valves, hydraulic valves, pilot dump valve, counter balance valve, pressure reducing valve, radiator, engine, hydraulic tank breather, kit suction filter assembly, bushing lever housing, lever brake band, retaining plate, suction filter, hydraulic oil filter, air intake filter, valve main, valve swing, air filter, pilot valve, joystick valves, winch motor, winch motor, engine oil pressure gauge, 2 pos/ 2 way valve, shuttle valve, gauge, kit , return filter assembly, hydraulic oil pressure guage, drive pinion, swing gear box, hydraulic swing motor, hydraulic swing brake, triple section hydraulic pump, boom hoist winch-include luffing pawl), friction plates for boom winch brake, brake discs, u-cup seal, piston back up ring, brake spring, o-ring, back up washer, o-ring, slew hyd.pre.gauge, o-ring/seal kit, o-ring/seal kit, o ring / seal kit, o ring / seal kit, engine foot throttle, gauge, pilot pressure, hoist selector valve, joy stick pressure gauge, slew hyd. pr. gauge, hand pump, air pressure gauge, eng start valve, engine shutdown valve, foot valve, radiator, cable emergency stop, return filter assembly, kit, suction filter assembly, kit, diesel and hydraulic oil tank gasket, air pressure gauge, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine oil pressure gauge, engine stop cable, water temp.gauge, magnetic pick up, joy stick, main/ auxiliary, joy stick , boom / slew, clamps for main,aux.& boom wire rope, swing brake, limit switch assembly, wiper motor with arm, blade and switch, anti 2 block system ( main & aux. hoist, compressor safety valve, drain valve, horn switch - push type, selector valve, pilot pressure valve, kit hydraulic directional valve, pilot pressure valve, gauge,hyd control - pressure., hydraulic oil cooler, return filter assembly, kit, suction filter assembly, kit, swing gear box, swing drive pinion, swing brake, joy stick, main/ auxiliary, joy stick , boom / slew, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine stop cable

CTN :44723860

09 Apr, 2026 97.9 Thousand

Bilaspur (Hp) - Himachal Pradesh

Tender For restoration of rain damages of lwss chounta jangle thathal under jsv section talai in tehsil jhandutta distt, bilaspur (sh-: providing and fixing of ms wheel valve chambers at various locations) under pdna

Central Government And Public Sector

CTN :44667699

10 Apr, 2026 NA

Bareilly - Uttar Pradesh

Tender For bid document for rate contract for the maintenance of valve chambers, valves markers and other miscellaneous maintenance works for bareilly for city gas distribution project of m/s. central u. p. gas limited, for the period of 02 year

Central Government/Public Sector

CTN :44689781

24 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of repair kit for midland make gm type auto drain valve rdso drg.no: skdp-4070,alt.nil. kit consists of 10 items as follows: 1) spring, madv/002 - 01 no. / set. 2) o-ring, madv/004.- 01 no. / set 3) o-ring, madv/005.- 02 nos. / set 4) o-ring, madv/006 -01 no. / set 5) o-ring, madv/011.- 01 no. / set 6) valve seat teflon, madv/015 - 04 nos./ set 7) seat spacer, madv/020 - 01 no. / set 8) seat washer, madv/025 - 01 no. / set 9) o-ring, madv/010 - 01 no. / set 10) o-ring, madv/007 - 01 no. / set specification. no. mp.0.01.00.26 rev. 01 march- 2021 [ warranty period: 24 months after the date of delivery ]

Valve Chambers Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector