Latest valve cap Tenders | Government valve cap Tenders

State Government

CTN :45433533

06 Jul, 2026 9.23 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of tube clamp , rail , support , front plate unpainted , union nut , union , valve cap 184697 , valve cap 184838 , valve cap 191569 , ring , support a , valve house , sy house , block , arm , plate cp a z , coil , valve body , chassis cp with bush , screen cp unpainted , bracket , stand , distance piece , screw , console , joint , stub , spring house , stud , cannula 4x3 18x20 , filter unit cp

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government/Public Sector

CTN :45406680

29 Jun, 2026 NA

Begusarai - Bihar

Tender For corrigendum : tender for supply of co2 gas refilling and related services barauni -gaschemcarbon dioxide , hydrostatic stretch test charges , replacement of cylinder valve cap , painting of cylinder in double coating , replacement of cylinder valve spindle , replacement of cylinder valve

CTN :45675374

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

CTN :45675375

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 scrap battery plate 105 nos. 2 scrap nylon hand bag containing 1 no. lt motor , 500 volt mark w acd and one electric bulb of 60 volt- 1 no. 3 liquid level cum moisture indicator 2 nos. 4 temperature sensor fa 3 nos. 5 temperature sensor fa /ra 10 nos. 6 cleaning agent 510-d, return filter and fresh cassette filter 86 nos. 7 released supply air duct complete with frame associated accessories 20 nos. 8 scrap carriage fan ac (95-135 volt), 400 mm sweep 47 nos. 9 set of 2 nos. return air duct complete with frame 7 nos. 10 mpcb for ventilation fan unit 29 nos. 11 mpcb for compressor unit range 16 amp 13 nos. 12 mpcb for condenser fan unit range 2.5 amp 15 nos. 13 fresh air duct complete with frame and associated accessories. 4 nos. 14 contactor for 60 kva transformer 4 nos. 15 feeder contactor 750 vo9lt 200 amp for net-1 & 2 2 nos. 16 thermostat switch 4 nos. 17 axle pulley 4.5 kw, 13 ton 4 nos. 18 berth light fittings 5 nos. 19 vane relay 9 nos. 20 control transformer 10 nos. 21 control harness, male portion 7 nos. 22 condenser fan 25 nos. 23 16 amp contactor 44 nos. 24 copper capillary with strainer 8 nos. 25 overload protection relay 39 nos. 26 timer (0.5 to 180 sec) 27 nos. 27 isolation transformer, 415 v/110 v, 500 va 5 nos. 28 control harness ( 2.5 mtr complete with 37 pin) 2 nos. 29 accumulator 3 nos. 30 contactor, 30/32 amp 36 nos. 31 mcb, 2, 6, 10 & 16 amp 53 nos. 32 ohp cutout 65 nos. 33 power cable harness including all wires 3 nos. 34 rotary switch 40 amp 74 nos. 35 mobile charging point 125 nos. 36 ballast for 11 w cfl 69 nos. 37 water pump 1 no. 38 non-return valve 2 nos. 39 ¿ c- check kit 29 nos. 40 valve guide 8 nos. 41 intake valve 12 nos. 42 mcb 32 amp 19 nos. total battery plate - 5565 kg, ferrous 245 kg

Central Government/Public Sector

CTN :45657775

13 Jul, 2026 NA

Raigad - Maharashtra

Tender For tender for supply of multimeter digital rishabh rishmulti12s , portable ssd hard disc 2tb , ees-pencil cell 1.5v size- aaa duracell , ees-pencil cell 1.5v size- aa duracell , locktite super bonder 495 , measuring tape , 5 meter-metalic , top plug anchor 3pin 5amp , top plug anchor , 3pin , 15a , tape pvc 18mm width , red. , tape pvc steel grip black 18mm width , tape pvc steelgrip 18mm width , yellow , tape pvc steelgrip blue 18mm width , tape pvc 18mm width , .green , 2 inch cello transperent tape , pr. regulator r-4108 aboil 07prv101-co , pr. regulator r-2402 aboil 07prv102-co , paint remover sp-98-s4. , tct hole saw cutter 3/4 inch , tct hole saw cutter 1/2 inch , tct hole saw cutter 1 inch , tct hole saw cutter 1-1/8 inch , tct hole saw cutter 1-3/4 inch , tct hole saw cutter 1-1/4 inch , tct hole saw cutter 1-1/2 inch , wire stripper for removi , integral led yellow 24vdc teknic make , emergency stop switch teknic make , pushbutton red non illu. teknic make , selector switch 2position teknic make , pushbutton green non illu. teknic make , pushbutton green illu. teknic make , pushbutton red illu. teknic make , pushbutton yellow illu. teknic make , element no-s1 teknic make , element nc-s2 teknic make , phoenix terminal strip set amm , phoenix fuse tb uk5 (a) , 7 lever locks with identical key , carbide drill bits 3.0 mm , carbide drill bits 4.0 mm , carbide drill bits 5.0 mm , carbide drill bits 6.0 mm , carbide drill bits 8.0 mm , carbide drill bits 10.0mm , drill bit masonary 4mm , drill bit masonary 6mm , masonary(concrete)drill bit 10mm , masonry concrete drill bit size 12mm , hacksaw blade 18tp , hacksaw blade , 6 inch , hacksaw frame , 12 inch , polythene bag 10 inch x12 inch . , heat shrink tube size 3.2/1.6mm white , anchor expansion bolt m10 x 75 , anchor expansion bolt m12 x 100 , identificaion tag , al , 10x7 , emery polish paper 1/0 , emery polish paper 2/0 , emery polish paper 4/0 , emery paper 0/0 , flux fluxite-soldering , soldering iron 25w , solder wire 1mm d , 60x40 , cd-dvd marker pen-blue , tube cutter size - 1/8 inch to 1 inch dia. , spare blade for tube cutter , p.g. pointer puller , cable tie , nylon , 2.5 x 100 mm , cable tie , nylon , 4.7 x 200mm , cable tie , nylon , 2.5 x 75 mm , cable tie , nylon , 3.6 x 150 mm , cable tie , nylon , 4.7 x 300 mm , fns-belt safety harness , ploy cotton knitted hand gloves , bench vice , 3 inch size , magnetic white board , hollow cylindrical lug (butts) , black ink ribbon for ferrule printing mc , ink ribbon case for ferrule printing mac , amm-v ferrule print mach tape yellow , 9 , amm-v ferrule print mach tape yellow.12 , amm-v ferrule printing tube white 3.2mm , amm-v ferrule printing tube white 4.0mm , hollow cyl lug (butts) with insulation , side cutter , 1 inch conduit felxible , multimode duplex fiber patch , crimping tool syt 6-6 , npl 1/4x2.5l ss npt , elbow ss od 1/2 inch x1/2 inch 3 , ss elb 1/4 inch m x 1/2 inch od. , conn male ssnpt1/4x1/2 inch od , ball valve 3/4 inch (f) x 1/2 inch (f) , npt , p.g. iso. valve technomat , npl-hex 1/2 inch , 50mm ssnpt , tee 6mm od tube with singal ferrule , conn ss 1/2 inch npt(m)x6mm od , union ct ss304-6mm odtube , npl 1/2x2.5l ss npt , npl 1/2x4l ss npt , conn ss 1/2 inch npt(f)x6mm o , conn male ssnpt 1/4 inch x6mm , conn male 3/8 inch (m)x6mmod , ss316 6mmx1/4 inch nptm elbow male connector , con fmle ssnpt1/4 inch x6mm od , elbow 1/2 inch , 3000 npt , ss304 , tee male ss304 1/4 inch nptx6mm odx6mm od , needle valve , cap 1/2 inch x3000 a182 f304 threaded npt , ss cplg 1/2 inch x1/2 inch npt(f) , conn male ss1/2 inch nptodtube , conn fmle ssnpt 1/2x1/2in , equal tee with 1/2 inch nptf threads ss316 , union s tu ss304 1/2in od , ball valve 1/2 inch npt (f) , threaded , 1/4 inch nptfball valve ss. , plg 1/2 inch f304 hex npt , tube conn od 3/4(f)x1/2ss , belt spz 1800 for p550a/b , crc 2-26 spray (elec) , rustoline in 500 ml tin , rust loosener spray cans wd-40 170 gms , m-seal , gen.adhesive 1kg , locktite super

CTN :45645897

30 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - p.l no: 98230013. scrap aluminium ingot in pieces consisting of scrap aluminium (with or without ferrous, rubber/plastic/ fiber and other than non-ferrous brass attachment) light fittings, window frame, stick, dj controller, fan blade, co2 box of wap -7, c3w, c2w, air flow, air dryer, air filter, anti-wind clamp, window shutter, levelling valve and duplex valve, air filter frame for lhb coaches, and miscellaneous aluminium parts, door closure, horn, prv, wiper motor, servo motor, end cover impler, mcp, panel board, different s valve, piston, motor blower cover, coupler, windscreen frame, hpmv & hpsv & mh fittings.qty-8000 kg. location- adjacent the south wall of ncb-6. custodians lot no. 03/09/june/2026-27/24. condition- weighment may be done at 50-ton weighbridge. loading of the materials will be performed by railway labourar.

CTN :45642806

13 Jul, 2026 NA

Thiruvarur - Tamil Nadu

Tender For starting valve cap (union) to drg no: 320-37 as per drg and specifications

Valve Cap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector