Latest valve cock Tenders | Government valve cock Tenders

CTN :40963609

10 Jul, 2025 NA

Mumbai - Maharashtra

Tender For replacement of non return valves of main pump no. 203 204 at mazgoan pumping station

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

Central Government/Public Sector

CTN :40962718

25 Jul, 2025 NA

Surat - Gujarat

Tender For supply of gate valves and non return valves d d - 3 inch nrv , 4 inch nrv , 6 inch nrv , 12 inch nrv , 2 inch gate valve , 3 inch gate valve , 4 inch gate valve , 6 inch gate valve , 12 inch gate valve

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

Central Government/Public Sector

CTN :40922281

23 Jul, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of c.s. ball valve 1.1 by 2 inch, 40mm ,flaged type ,class 150 , is 9890 , c.s .ball valve size 25mm, flaged type ,class 150 ,is 9890 , c.s.ball valve size 50 mm, flaged type ,class 150, is 9890 , c.s .ball valve size 80 mm, flaged type ,class 150 , is 9890 , c.s .ball valve size 100 mm, flaged type ,class 150 ,is 9890 , g.m.gate valve,1 inch 25 mm as per is 778 latest ,isi marked ,class 1 valves , g.m.gate valve,1 by 2 inch 15mm as per is 778 latest ,isi marked ,class 1 valves , g.m.gate valve,3 inch 80mm as per is 778 latest ,isi marked ,class 1 valves , g.m.gate valve, 1.1 by 2 inch 40mm as per is 778 latest , g.m.gate valve,2 inch 50mm as per is 778 latest ,isi marked ,class 1 valves , g.m.gate valve,3 by 4 inch 20mm as per is 778 latest ,isi marked ,class 1 valves , g.m.non return valve cu alloy vertical lift check valve 2inch , g.m. nrv horizontal lift check valve 1inch screwed female bsp threads as per bs 5154 by b ) /bid number : gem/2025/b/6391441 * /dated: 02-07-2025 & & / bid document 1 / 17

Central Government/Public Sector

CTN :40916678

22 Jul, 2025 22.50 Lacs

Chandrapur - Maharashtra

Tender For supply of sluice valves and non return valves : : 5 =5 = - valve gt hd sluice ss 200mm , valve gt sluice ss 150mm , valve gt sluice cst stl 150mm , valve gt sluice cst stl 200mm , valve chk non rtrn ss 200mm , valve chk non rtrn ss 150mm , valve chk non rtrn cst stl 150mm , valve chk non rtrn cst stl 200mm

CTN :40903245

10 Jul, 2025 24.24 Lacs

Kajora - West Bengal

Tender For supply of heavy duty valves and double armoured flanged flexible rubber hose - cast steel sluice valve 6 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , cast steel non return valve 6 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , cast steel foot valve 6 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , cast steel sluice valve 8 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , cast steel non return valve 8 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , cast steel foot valve 8 inch wp 1000 psi and tested 2000psi for industrial use heavy duty with mfg test certificate , double armoured flanged flexible rubber hose 6 inch id 8 hole flange 6m length wp 25kgs per cm2 , double armoured flanged flexible rubber hose 8 inch id 8 hole flange 3m length wp 25kgs per cm2 ) /bid number : gem/2025/b/6397340 * /dated: 30-06-2025 & & / bid document 1 / 16

State Government

CTN :40565555

16 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of low pressure valve for unit no. 1 to 8 at wanakbori tps. - rubber lined diaphragm valve size 100 mm (4), novel make, metal: cast iron., rubber lined diaphragm valve size 150 mm (6), novel make, metal: cast iron., neoprene 100 percent pure rubber diaphragm 100 mm, gate valve 150,size 25 mm (1"), complete valve assembly for 40 nb gate valve, gate valve 150 size:50 mm ( 2" ), ccs gate valve class-150 65 nb, cs gate valve 80 nb, cs gate valve 100 mm dia, cs gate valve size 150 mm (6") nb, 150 flanged type, cs gate valve class-150,200 nb (8"), c.i. gate valve 250 mm dia, gate valve size 300 mm nb (12") 7.5 kg/cm2, gate valve class-150,350 mm nb, ci globe valve size 100 nb (4") 150 flang e to flange 292 mm pcd 191, c.i.ball valve size 1" bsp, class 150, internal thread at both end, 50 nb ball valve, gun metal gate valve size 15 mm (1/2"), is-778, class-i, screwed female end., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., gun metal gate valve size 25 mm (1"), is-778, class-i, screwed female end., g.m.globe valve size 32 nb, gun metal wheel valve-40mm, gun metal valve 2", gun metal globe valve nb 50, is -778, 450 mm butterfly valve, cs nrv check valve 80nb, ccs swing check non return valve 150,100 nb (nrv), ccs swing check non return valve 150,200 nb (nrv), cs globe valve class-150,200 nb (8"), ss-316, astm a 351 gr. cf8m, ball valve, size: 40mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., ball valve size 1.1/4", ss-316, astm a 351 gr. cf8m, ball valve, size: 25mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., nrv flap 125 nb for dm plant unit-8, ci check valve size 65 mm (nrv), non return valve size 50 mm, globe valve nb20, globe valve 1500,1/2" nb, gate valve size 1 1/4", globe valve 80 mm, cs gate valve class 150,size:125 mm, swing check valve (nrv), size 65 nb with epdm rubber lining for dm plant., ci ball valve size 1/2" bsp,150, internal thread at both end, g m gate valve 40 mm (1.1/2"), butter fly valve 150 nb, swing check valve (nrv) size-450 mm standard-bs 1868 rating-asa 150 body & bonnet-astm a 216 gr wcb disc-wcb+13 percent cr overely trim-aisi 410 operating pr -5 to 8 kg/cm2, cs non return valve (nrv) ,size 350 nb (14") ,class: 150, ss 50 nb gate valve, c.i.globe valve 150nb, flanged type, flange to flange 355 mm, p.c.d.-245 mm with 8 no of holes

Central Government / Public Sector

CTN :40873560

21 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For 1- 1/2 inch drain valve cock/ cut out cock (handle top), material : stainless steel. sample to be approved before bulk supply. [ warranty period: 30 months after the date of delivery ]

Valve Cock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector