Latest valve grinding stick Tenders | Government valve grinding stick Tenders

State Government

CTN :40279012

16 Jun, 2025 274

Bengaluru - Karnataka

Tender For e- tender for supply of orthopaedic trauma and arthroplasty implants high end - hemihydrate calcium sulphate kit 10- cc, hemihydrate calcium sulphate kit -5 cc, distal femur nails for standard and periprosthetic fractures with larger distal bends and with locking attachment washer or condular nuts and washers, us fda approved, reamer bone harvesting kit with reamer head and reaming rod , us fda approved , variable angle locking calcaneal plate 2.7mm with/without tab small/medium/large -, 2.7mm va locking screw -, 2.7 mm metaphyseal screw 2.7mm cortex screw variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., low profile distal tibial medial plate 3.5mm,6-14 holes,titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., lcp anterolateral distal tibia plate 3.5mm, right or left,(5-21)holes, titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium, radial head replacement system is a solution for replacing the radial head for radial head fractures to restore elbow stability and forearm rotation to maintain the legth of radius. implants should be available in 19 mm,22 mm,25 mm variant and available in stem varing 5.5 mm to 8.5 mm and stem length 21 mm to 24. the implants should be uncemented with all instruments in sterile form for one time use., polymethylmethacrylate (pmma) injectable bone cement system for augmentation of proximal femoral nailing system (tfna) through cannulated implants and instruments for patients with poor bone quality (such as osteoporosis). its applicator allows surgeons to inject cement into the femoral head through cannulated implants, reducing the risk of cut-out, locking attachment plate 3.5 mm is a fixed-angle construct in periprosthetic fractures and fractures in the presence of intramedullary implants, particularly in osteopenic bone where screw purchase is compromised the plate is attached to existing locking compression plates (lcp using a connecting screw, to augment stabilization of fractures.the arms on each side of the plate offer the possibility of bypassing the prosthesis stem with 3.5 mm locking screws (or 3.5 mm cortex screws)., locking anterior patella variable angle plate for simple and complex patella fractures should have range of plates - core, to address different fracture pattern with 2.7 mm va locking screws and 2.7 cortex screws. variable angle locking screw should have option to lock at 15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., variable angle locking hand system consists of plates that are anatomic, procedure-specific for the fracture fixation of metacarples and phalanges, 1.3 mm profile plate configuration includes either straight plate/ t-plate/phalangeal base plate/y- plate/strut plate/web plate/phalangeal head plate, the construct consists of plate 1.3 mm, va locking head screw 1.3mm, cortical screws 1.3 mm., variable angle lcp clavicle plate which can be used for lateral extension, medial, shaft, anterior and for ac joint fracture. the construct consist of plate, locking head screw 2.7 mm and cortical screws 2.7 mm, (compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce stan

corporations/Associations/Others

CTN :40478582

16 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For tender for supply of broken screw and nail removal set and universal nail extraction set - hollow reamer , complete , anticlockwise cutting , for screws 3.5 and 4.0 mm , extraction bolt , for screws 3.5 and 4.0 mm , hollow reamer , complete , anticlockwise cutting , for screws 4.5 mm , extraction bolt , for screws 4.5 and 5.0 mm , extraction screw for screws 3.5 mm , extraction screw , conical , for screws 4.5 and 6.5 mm , t-handle with quick coupling , screwdriver shaft , hexagonal , small , 2.5 mm , screwdriver shaft , hexagonal , large , 3.5 mm , hss drill bit 3.5 mm for implant steel , sterile , hss drill bit 2.5 mm for implant steel , sterile , screwdriver shaft , stardrive , t8 , self-holding , forceps for screw removal , l 205mm , gouge , 10mm wide , l 205mm , hollow reamer for 5.0 / 6.0 / 6.5 / 7.0 mm screws , extraction bolt , for 5.0 / 6.0 / 6.5 / 7.0 mm screws , sharp hook , l 155mm , screw driver shaft stardrive t15 , 3.5 , screw driver shaft stardrive t25 , 3.5 , handie with quick coupling , extraction plier for screws , to grasp screws behind the screw head , screw driver hexagonal cannulated 4.5 , screw driver hexagonal cannulated 6.5 , connector with thread , for extraction hook , extraction hook , length 480 mm , for nails dia 9.0 mm , extraction hook , iong , for nails dia 9.0 mm to 11.0 mm , extraction hook , iong , for nails dia 11.0 mm to 14.0 mm , t- handle with quick coupling , box tray for instruments , including all conical / straight bolts , extraction rod , slot hammer etc.

CTN :40490984

17 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of bench type drilling machine , bench grinding machine , bench vice 150mm , turning tool -carbide tip hss , facing tool -carbide tip hss , knurling tool , threading tool external , parting tool -high speed steel tools , drilling tool , boring tool , reamer -straight, tungsten carbide , threading tool internal , job centering tool with magnetic stand , miniature cnc lathe , metal cutting power saw , jigs and fixture for lathe , drill bit for drilling machine , drill chuck for drilling machine , grinding wheels , saw blade

CTN :40491738

10 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For supply of solid carbide reamer dia-9.70mm as per rfi drg. no. t-21088/1. make: biltz/uttam tools/sdi/rohit ind

Central Government/Public Sector

CTN :40287731

02 Jun, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : p6a1y42502-morse taper reduction sleeve, drill drift, holder for shell reamer and morse taper exten socket

Central Government/Public Sector

CTN :40097739

28 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of hss mt shank chucking reamer dia 9.96 mm , hss mt shank chucking reamer dia 10.00 mm , hss mt shank chucking reamer dia 9.96 mm x 200 mm fl

corporations/Associations/Others

CTN :40402838

03 Jun, 2025 NA

Bhatgaon - Chhattisgarh

Tender For supply of reamer b rv600 std front , reamer h rv600 std front , reamer n rv600 std front

CTN :40384647

09 Jun, 2025 NA

Ahmednagar - Maharashtra

Tender For supply of multilayered diamond titanium nitride coated tips points , sticks tracing red or green soft pkt of 10 , rubber base impression material kit with accessories , broach nerve canal barbed assorted size pkt of 12 , bur round tungsten carbide for fg 1 point 0 mm pkt of 3 , flowable light cure composite kit complete of four syringes of 2 to 4 gm each with etchant and bonding , gutta percha points 2 percent set of 02 boxes of size 15 to 40 and 45 to 80 box of 120 , material temporary filling no mix single phase bott of 25 to 30 gm , material plastic glass ionomer photo cure for lining and luting powder 10 15 gm and liq , material restorative glass ionomer type ii for filling containing powder 10 to 15 gm and liq set of , root canal sealer paste for obturation containing two tubes preloaded syringes , mineral trioxide aggregate pkt of 1 gm , set of six hand niti tapered files 21 mm length with corresponding gutta percha points and paper pointscomplete kit , set of six hand niti tapered files 25 mm length with corresponding gutta percha points and paper pointscomplete kit , set of six rotary niti tapered files 21 mm length with corresponding gutta percha points and paper points set complete , set of six rotary niti tapered files 25 mm length with corresponding gutta percha points and paper points set complete , gates glidden drill sizes 1 to 6 length 28 mm , endodontic access burs set of 06 , k files stainless steel size no 8 length 25 mm set of 6 , k files stainless steel size no 10 length 25 mm set of 6 , k files stainless steel length 21 mm size no 15 to 40 set of 6 , k files stainless steel length 25 mm size no 45 to 80 set of 6 , h file stainless steel size no 15 to 40 length 21 mm set of 06 , gp solvent bott of 10 to 20 ml , composite finishing and polishing kit , plastic wedges , alcoholic hand disinfectant rub , cotton wool absorbent pkt of 500 gm , gauze absorbent folded 2 point 5 cm 100 mtr , rolls absorbent cotton dental assorted sizes in box of 500 , surgeons caps disposable , surgeons mask disposable , n 95 mask without expirator valve , k file 21mm length size no 08 refill pack , k file 21mm length size no 10 refill pack , k file 21mm length size no 15 refill pack , k file 21mm length size no 20 refill pack , k file 21mm length size no 25 refill pack , k file 21mm length size no 30 refill pack , reamer 25mm length size no 10 refill pack , reamer 25mm length size no 15 refill pack , dental floss unifloss , interdental brush , disposable pmt set , gluteraldehyde solution cidex , modeling wax , gum paint , suture 3 0 silk , suture absorbable 3 0 , spirit bott of 500ml , 6 percent gp point 15 to 40 , 4 percent gp point 15 to 40 , etchant , bonding agent lignocaine hcl 2% with adrenaline (1:80000) 30 ml inj, gel for root canal preparation containing water soluble lubricant 15-17% edta tube of 3.0-5.0 gm, dycal, clove oil bottle of 50 ml, alveolar, pulp devitaliser non arsenic, triamcinolone acetonide 0.1% for oral use, tube of 5 gm, sodium hypochlorite 5%, 10% povidone iodine solution u.s.p equivalent to 1% iodine bott of 500 ml, hydrogen peroxide solution with stabilizer ip (20 volume) 500 ml bott, antimicrobial hand gel containing ethyl alcohol, abrasive mounted diamond fg round 1.8 mm, abrasive mounted diamond fg inverted cone 1.8 mm, abrasive mounted diamond fg cylindrical 1.2 mm, antiseptic oral pain relieving topical gel containing antiseptic and topical anaesthetic in gm or ml, bur tungsten carbide for straight hand piece 7 mm, denture adhesive powder bottle 10-15 gm, hand piece lubricant spray bott of 500 ml-600ml, mirror mouth plain glass top for, disposable rvg sensor sleeves (pkt of 1000, plaster dental stone pkt of 1 kg, articulating bid details/ 2 / 61

CTN :40389085

09 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of orthopaedic battery operated drill and reamer system for trauma surgeries

Central Government/Public Sector

CTN :40383698

28 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of hss drills reamers slot cutter and end mill - 35.tst drill d12.5xfl101xoal182 , 36.tst drill d14.5xfl114xoal212 , 37.tst drill d16.0xfl120xoal218 , 38.tst drill d17.0xfl125xoal223 , 39.tst drill d17.5xfl130xoal228 , 40.tst drill d18.0xfl130xoal228 , 41.tst drill d19.0xfl135xoal233 , 42.tst drill d20.0xfl140xoal238 , 43.tst drill d21.0xfl145xoal243 , 44.tst drill d21.5xfl150xoal248 , 45.tst drill d25.0xfl160xoal281 , 46.tst drill d29.5xfl175xoal296 , 47.tst drill d31.5xfl180xoal301 , 48.tst drill d32.0xfl185xoal334 , 49.tst drill d33.0xfl185xoal334 , 50.tst drill d34.5xfl190xoal339 , 51.tst drill d40.0xfl200xoal349 , 52.tst drill d42.0xfl205xoal354 , 53.tst drill d42.5xfl205xoal354 , 54.tst drill d43.0xfl210xoal359 , 55.tst drill d44.5xfl210xoal359 , 56.tst drill d45.0xfl210xoal359 , 57.tst drill d46.0xfl215xoal364 , 58.tst drill d47.0xfl215xoal364 , 59.end mill ps d04.0xsh4 , 60.end mill ps d05.0xsh5 , 61.end mill ps d06.0xsh6 , 62.end mill ts d32.0xfl053xoal155 , 63.slot cutter ps d10 , 64.slot cutter ps d12 , 65.slot cutter ps d14 , 66.slot cutter ps d20 , 67.slot cutter ps d22 , 68.slot cutter ps d25 , 69.slot cutter ts d28 , 70.tst drill d30.5xfl180xoal301 , 71.hss-m35 tst drill d16.0xfl230xoal355 , 72.hss-m35 tst drill d17.5 x fl245xoal370 , 73.tst drill d43.50xfl475mm-hss m35 , 74.tst drill d29.0xfl178xoal296 , 75.tst drill d33.5.0xfl185xoal334 , 76.tst drill d37.5.0xfl195xoal344 , 77.tst drill d53.5.0xfl225xoal412 , 78.tst drill d54.5.0xfl230xoal417 , 79.tst drill d64.5.0xfl245xoal432 , 80.tst drill d35.5xfl190xoal339 , 81.tst drill d41.50xfl205xoal354-hss m35 , 82.tst drill d17.5mmxfl165mmxoal263mm , 83.tst drill d18mmxfl165mmxoal263mm , 84.sst drill d03.5xfl150xoal220-m35 , 85.tst drill d08.0xfl250xoal330 m35 , 86.tst drill d09.0xfl350xoal450 m35 , 87.tst drill d11.7xfl300xoal400-m35 , 88.mbyc. reamer d13 cel 120-125-m35 , 89.mbyc. reamer d16 cel 120-125-m35

Valve Grinding Stick Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector