Latest valve lever cover Tenders | Government valve lever cover Tenders

Central Government/Public Sector

CTN :45723587

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned, scrap various types of cast iron items like hearth border piece, wall border piece, gate valves, side casting, plumber block, bridge tubes, pipes, valves, moulding boxes, pot sleepers, bearing boxes, bearing plates, other ci items etc., with or without damaged and broken condition as available in the lot. note : the lot shall be delivered as is where is basis. other items except cast iron items in the lot is not permitted to take while delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. purchaser should arrange all lifting equipment like forklift, poclain, jcb etc., to lift the cast iron items while delivery. delivery unit : in mt

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45701696

15 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned (ms low melting) consisting of ms cutting pieces, cut pieces pipes of material air filter,fire extinguisher, ms cattle guard solid and broken condition, various type sort and sizes & pneumatic pipe lines, cock valves, brake shoe, gear ring, pin, truck steering movable part, bush, universal joint, loose starter parts, clamp loose parts, gear, pressure plate, clutch plate, loose parts truck and moblie crane, jombo truck cover, gear box,steering base,and rod, etc. (non loco parts released from mw ii section) ms sheet, msr broken parts,condemned cup board (almirah), matrial rack,loco driver's seat, with miner ss attachments, ms chairs, tables, boards, bucket, gear case , screw coupling, brake liner, msu parts, nut bolts, voasher, ms patti,cp parts, rim, ms jali,ms bearing cover, rods, stopper, ms angle, cock, ms bearing, siling wire rope, mvmt,ocb dom,blore, locuker,air tank, air reservoir, various types and broken ms parts and miscellaneous items with or without loco and non-loco items with minor ss & aluminium or rubber attachments if any, in sort and sizes released from different sections as well as from electric locomotives. location scrap yard elw /bsl qty.30 mts approx

Central Government/Public Sector

CTN :45702704

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers and buffer casings with/without spindle in full/broken/cut, knuckles and coupler yoke for cbc,end shields,control arms , axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers ,screw couplings and its link parts, bearing cover casings,grease collors, anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, small/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, duct assembly,huck bolts,huck bolt tails ,gudgeon pins, ms plate cuttings, bss hanger pins and holders, springs in full/broken, end locking screws ,traction rods,suspension tube bearings, floating levers, bearing racers, locking plates, axle stay, bearing sleeves, pull rods, draft gears, bearing adapters, vacum brake clamps, wheel hubs, ctrb bearing components, valves of sorts and sizes ,bearing outer rings, brake rigging components ,traction motor assembly components, equiilising stay rods, car body rods, traction levers, tensioning rods, buffer plunger full assemblies , valve springs, coupler rods, angle cut pieces, cbc couplers, alternator rotor shafts, connecting rod with or without piston, piston carriers, center pivot top and bottom parts and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

corporations/Associations/Others

CTN :45668875

25 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of scrap sc valves

Central Government/Public Sector

CTN :45675432

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous condemned icf and lhb ac/non ac bogie frame and cut pcs of icf and lhb bogie frame with or without components of sorts and sizes, bogie bolster and lower spring beam arrangement. qty- 90 mt. lot will be sold as is where is basis. note:- 1) loose brake cylinder and loose safety wire rope will not be delivered. 2) bogie components like loose rubber items, loose fibre brake blocks/pads, pvc bushes, brake beam, brake calipers, brake pipe, dampers, check valves, hanger, anchor link, axle box housing and ferrous components of icf/lhb bogie found in lot will be dlivered. 3) loading by purchaser. 4) cutting not allowed. 5) delivery not allowed against part payment. 6) neglegible non ferrous attached with bogie frame/cut pcs of bogie frame found in lot will be delivered. location- lying at between line no. 2 and ward e-14.

CTN :45675382

15 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - r/u aluminium items i.e different types of brake valves, axle box assembly, vestibule foot plate etc in damaged condition.

corporations/Associations/Others

CTN :45653567

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of new obsolete elements (usha) ue f 551,new obsolete delivery valves (usha) uv 576,new obsolete delivery valves (usha) uv 579,new obsolete delivery valves (usha) uv 529,new obsolete delivery valves (usha) uv f 027,new obsolete delivery valves (usha) uv 578,new obsolete delivery valves (usha) uv 520,new obsolete spring brake shoe return,new obsolete bendix drive assembly,new obsolete high performance ff nf 803 fuel filter (naveen),new obsolete clutch inner race,new obsolete unloader valve with ti repair kit (msp 3/49),new obsolete quadruple system production valve repair kit,new obsolete 3rd speed wheel main shaft,new obsolete 3rd on main shaft,new obsolete 3rd speed pinion gears,new obsolete disc gear 40 theeth,new obsolete second gear,new obsolete 4th speed wheel counter shaft,new obsolete 3rd gear on counter shaft,new obsolete split small (28.t)-1312,new obsolete synchroniing sleeve (2nd & 3rd) engaging),scrap rubber goods

Valve Lever Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors