Latest valve regulator Tenders | Government valve regulator Tenders

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

Central Government/Public Sector

CTN :45637832

25 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - 98200070 scrap released different items of copper alloys such as gun metal / brass/ bronze with or without major / minor ferrous / non ferrous attachements such as spring, splasher, handle, patti, fins, washer, tap, nut bolt, trunion, pressure gauge,valve, regulator, parts released from valve any other brass/bronze/gun metal item at this location with/ without ferrous/ non ferrous attachment etc.un serviceable to railway use , off sorts, types, makes, capacity and sizes, broken / unbroken, burnt / unburnt and damaged / undamaged. with or without rust, dust, oil, paint, adhesives, wet and grease on as it is basis. loading by railway. note: bidders are advised to see the lot physically .delivery will be made as on as it basis. loading by railway.custodian: dms/nf/mx. confisticated lot no. 0904000226

CTN :45597887

29 Jun, 2026 178

Multi City - Karnataka

Tender For supply of water supply items to kirugavalu grama panchayat - ½" pvc pipe bend, ¾" pvc pipe bend, 1" pvc pipe bend, 1¼" pvc pipe bend, 1½" pvc pipe bend, 2" pvc pipe bend, 2½" pvc pipe bend, 3" pvc pipe bend, 4" pvc pipe bend, ½" pvc tee, ¾" pvc tee, 1" pvc tee, 1¼" pvc tee, 1½" pvc tee, 2" pvc tee, 2½" pvc tee, 3" pvc tee, 4" pvc tee, 2" service saddle (63x20mm), 2½" service saddle (75x20mm), ½" gi elbow & collar, ¾" gi elbow & collar, 1¼" gi collar, 1¼" gi bend, 2" gi bend, 2½" gi bend, 2" gi collar h/v, 2½" gi collar h/v, 2" gi non return valve, 2½" gi non return valve, ½" gi pipe nipple 1 feet, ¾" gi pipe nipple 1 feet, 2" gi pipe nipple 1mtr, ½" pvc pipe, ¾" pvc pipe, 1" pvc pipe, 1¼" pvc pipe, 1½" pvc pipe, 2" pvc pipe, 2½" pvc pipe, 3" pvc pipe, 4" pvc pipe, ½" pvc elbow, ¾" pvc elbow, 1" pvc elbow, 1¼" pvc elbow, 1½" pvc elbow, 2" pvc elbow, 2½" pvc elbow, 3" pvc elbow, 4" pvc elbow, ½" pvc pipe collar, ¾" pvc pipe collar, 1" pvc pipe collar, 1¼" pvc pipe collar, 1½" pvc pipe collar, 2" pvc pipe collar, 2½" pvc pipe collar, 3" pvc pipe collar, 4" pvc pipe collar, 2" pvc joint collar, 2½" pvc joint collar, 3" pvc joint collar, ½" pvc ball valve, ¾" pvc ball valve, 1" pvc ball valve, 1¼" pvc ball valve, 1½" pvc ball valve, 2" pvc ball valve, 2½" pvc ball valve, 3" pvc ball valve, 4" pvc ball valve, ¾" cpvc pipe, 1" cpvc pipe, ¾" cpvc elbow & collar, 1" cpvc elbow & collar, ¾" cpvc tee, fta, mta, 1" cpvc tee, fta, mta, cpvc gum 29ml, ¾" cpvc ball valve, 1" cpvc ball valve, ¾" cpvc union & tank nipple, 1" cpvc union & tank nipple, solvent cement, solvent cement, solvent cement, ½" pvc mta & fta & end cap, ¾" pvc mta & fta & end cap, 1" pvc mta & fta & end cap, ¼" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 2" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 3" pvc mta & fta & end cap, gargen pipe ¾", gargen pipe 1", 2hp v4 sm motor pump 20stage, 3hp v4 sm motor pump 30stage, ¼" hdpe pipe, ½" hdpe pipe, hdpe end connector, stick & paper, thrust bearing & bottom, impellers, rotor bush, do bush, stg bush, ¼" gi pipe, plunger rod 3 meter, gm upper valve, gm lower valve, borewell handle, borewell head, borewell water tank, borewell pedestal stand, ¼" gi collar long, mcb 4 pole, bolt nut 5/8", bolt nut 3/8", nrv lather, x nipple, m-12 boltnuts, bucket washer, cylinder, ½" gi tap, ¾" gi tap, hp motor pump with 10 stage, 7.5 hp motor pump with 12 stage, 10 stage pump, 12 stage pump, 7" cassing pipe, shalk thrid, mrf tape, pcv tape roll, 1.2 mm rewinding copper wire, 2" bore clamp, ½" bore clamp, 2" gi pipe, 4sqmm 3core copper cable flat type, dol electrical panel board, sada electrical panel board, relay ltlk, electrical contact kit, contactor unit, no volt coil, amps meter, volt meter, indicator, dol starter m, dol starter ltlk, 63amps fuse unit, 100amps fuse unit, 7.5hp preventor, 7.5hp-15hp preventor, relay unit-motor, 5" pvc pipe, 5" repair collar, 5" pvc elbow, 5" pvc pipe bend, 5" pvc tee, 5" mta, 5" fta, 5" pvc collar, 6" pvc pipe, 6" repair collar, 6" pvc elbow, 6" pvc pipe bend, 6" pvc tee, 6" plain end, 6" mta, 6" fta, 6" pvc collar, 6" threaded end cap, motor rewinding labour+ worshop turning fitting, charges, motor lifing erection and service fitting, hand pump lifting erection and service, starter board wiring electrical service and fitting, over tank gateawall gm rad leath tredded charge and service

CTN :45579015

26 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of tie rod lh , tie rod rh , lower ball joint , upper ball joint , clutch cyl assy , clutch sleeve assy , wheel bolt , gear leaver kit , read valve , regulator , rectifire , clutch booster , field coil , armature , rprm2326 , combination

Central Government/Public Sector

CTN :45593503

19 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. signal items and ms/ci/gi item scrap consisting of point machine, ground connection, , point machine base, lock rod,contactor unit parts, other point machine parts, loco parts, gears, slide cover, cams, ms rotors, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, traction motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, ms trolley, rottery key, grill, pulley, air filter,cut of angle cock,knuckle pin,wearing plate,cp bottom,ci part, fencing, hood, boiler tube, winch wheel, lc gate parts, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder,weigh machine, connecting rod, signal posts with or without base, bearing case, tension rod, cam shaft,ms cut pieces,pipes, storng part with diabar ms attachment,pure iron flats,pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component, trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, sack barrow,winch for lb gate,l angle,gate boom,rail wheel barrow,nozzle pricker, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery (4) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. locotion: w-6& 7 of scrap yard/ssd/ptj.

Central Government And Public Sector

CTN :45453677

19 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of indigenous, empty, high pressure, seamless, steel, flat type, concave bottom, gas cylinder as per is:7285 part ii, suitable for filling oxygen gas having water capacity 47.00 ltrs. fitted with normal valve, working pressure 150 bar, test pressure 225 bar, painted as per colour code as specified under gas cylinder rule 2004. [ warranty period: 30 months after the date of delivery ] ]

CTN :45383290

12 Jun, 2026 178

Multi City - Karnataka

Tender For supply of water supply items to mikkere grama panchayath - mk_ 1 inch pvc pipe bend, mk_ 0.75 inch pvc pipe bend, mk_ 0.5 inch pvc pipe bend, mk_ 2.5 inch service saddle 75x20mm, mk_ 2 inch service saddle 63x20mm, mk_ 4 inch pvc pipe bend, mk_ 3 inch pvc pipe bend, mk_ 2.5 inch pvc pipe bend, mk_ 2 inch pvc pipe bend, mk_ 1.5 inch pvc pipe bend, mk_ 1.25 inch pvc pipe bend, mk_ 4 inch pvc tee , mk_ 3 inch pvc tee , mk_ 2.5 inch pvc tee , mk_ 2 inch pvc tee , mk_ 1.5 inch pvc tee , mk_ 1.25 inch pvc tee , mk_ 1 inch pvc tee , mk_ 0.75 inch pvc tee , mk_ 0.5 inch pvc tee , mk_ 0.75 inch gi elbow & collar, mk_ 0.5 inch gi elbow & collar, mk_ 2.5 inch gi collar h or v, mk_ 2 inch gi collar h or v, mk_ 1.25 inch gi collar, mk_ 2.5 inch gi bend, mk_ 2 inch gi bend, mk_ 1.25 inch gi bend, mk_ 0.75 inch pvc pipe collar, mk_ 0.5 inch pvc pipe collar, mk_ 4 inch pvc pipe, mk_ 3 inch pvc pipe, mk_ 2.5 inch pvc pipe, mk_ 2 inch pvc pipe, mk_ 1.5 inch pvc pipe, mk_ 1.25 inch pvc pipe, mk_ 1 inch pvc pipe, mk_ 0.75 inch pvc pipe, mk_ 0.5 inch pvc pipe, mk_ 4 inch pvc elbow, mk_ 3 inch pvc elbow, mk_ 2.5 inch pvc elbow, mk_ 2 inch pvc elbow, mk_ 1.5 inch pvc elbow, mk_ 1.25 inch pvc elbow, mk_ 1 inch pvc elbow, mk_ 0.75 inch pvc elbow, mk_ 0.5 inch pvc elbow, mk_ 2 inch gi pipe nipple 1mtr, mk_ 0.75 inch gi pipe nipple 1 feet, mk_ 0.5 inch gi pipe nipple 1 feet, mk_ 2.5 inch gi non return valve, mk_ 2 inch gi non return valve, mk_ 4 inch pvc pipe collar, mk_ 3 inch pvc pipe collar, mk_ 2.5 inch pvc pipe collar, mk_ 2 inch pvc pipe collar, mk_ 1.5 inch pvc pipe collar, mk_ 1.25 inch pvc pipe collar, mk_ 1 inch pvc pipe collar, mk_ 3 inch pvc joint collar, mk_ 2.5 inch pvc joint collar, mk_ 2 inch pvc joint collar, mk_ 4 inch pvc ball valve, mk_ 3 inch pvc ball valve, mk_ 2.5 inch pvc ball valve, mk_ 2 inch pvc ball valve, mk_ 1.5 inch pvc ball valve, mk_ 1.25 inch pvc ball valve, mk_ 1 inch pvc ball valve, mk_ 0.75 inch pvc ball valve, mk_ 0.5 inch pvc ball valve, mk_ 1 inch cpvc pipe, mk_ 0.75 inch cpvc pipe, mk_ 1 inch cpvc tee, fta, mta, mk_ 0.75 inch cpvc tee, fta, mta, mk_ 1 inch cpvc elbow & collar, mk_ 0.75 inch cpvc elbow & collar, mk_ thrust bearing & bottom, mk_ solvent cement 250, mk_ solvent cement 50, mk_ solvent cement 100, mk_ stick & paper, mk_ 3 inch pvc mta & fta & end cap, mk_ 2.5 inch pvc mta & fta & end cap, mk_ 2 inch pvc mta & fta & end cap, mk_ 1.5 inch pvc mta & fta & end cap, mk_ 1.25 inch pvc mta & fta & end cap, mk_ 1 inch pvc mta & fta & end cap, mk_ 0.75 inch pvc mta & fta & end cap, mk_ 0.5 inch pvc mta & fta & end cap, mk_ 1.5 inch hdpe pipe, mk_ 1.25 inch hdpe pipe, mk_ hdpe end connector, mk_ gargen pipe 1 inch , mk_ gargen pipe 0.75 inch , mk_ 1 inch cpvc union and tank nipple, mk_ 0.75 inch cpvc union and tank nipple, mk_ cpvc gum 29ml, mk_ 1 inch cpvc ball valve, mk_ 0.75 inch cpvc ball valve, mk_ 3hp v4 sm motor pump 30stage, mk_ 2hp v4 sm motor pump 20stage, mk_ x nipple, mk_ plunger rod 3 meter, mk_ nrv lather, mk_ m-12 boltnuts, mk_ impellers, mk_ gm lower valve, mk_ gm upper valve, mk_ 0.75 inch gi tap, mk_ 0.5 inch gi tap, mk_ 1.25 inch gi pipe, mk_ 1.25 inch gi collar long, mk_ mcb 4 pole, mk_ cylinder, mk_ borewell pedestal stand, mk_ borewell water tank, mk_ borewell head, mk_ borewell handle, mk_ bucket washer, mk_ stg bush, mk_ do bush, mk_ rotor bush, mk_ bolt nut 5by8 inch, mk_ bolt nut 3by8 inch, mk_ 7.5 hp motor pump with 12 stage, mk_ 6 hp motor pump with 10 stage, mk_ volt meter, mk_ shalk thrid, mk_ 1.2 mm rewinding copper wire, mk_ relay ltlk, mk_ 7.5hp preventor, mk_ pcv tape roll, mk_ 12 stage pump, mk_ 10 stage pump, mk_ no volt coil, mk_ mrf tape, mk_ indicator, mk_ 4sqmm 3core copper cable flat type, mk_ 63amps fuse unit, mk_ 100amps fuse unit, mk_ sada electrical panel board, mk_ dol electrical panel board, mk_ electrical contact kit, mk_ dol starter ltlk, mk_ dol starter m, mk_ 7 inch cassing p

CTN :45357457

11 Jun, 2026 160

Multi City - Karnataka

Tender For procurement of water supply items - kh_ 4 inch pvc pipe bend, kh_ 3 inch pvc pipe bend, kh_ 2.5 inch pvc pipe bend, kh_ 2 inch pvc pipe bend, kh_ 1.5 inch pvc pipe bend, kh_ 1.25 inch pvc pipe bend, kh_ 1 inch pvc pipe bend, kh_ 0.75 inch pvc pipe bend, kh_ 0.5 inch pvc pipe bend, kh_ 0.5 inch pvc tee , kh_ 2.5 inch service saddle 75x20mm, kh_ 2 inch service saddle 63x20mm, kh_ 0.75 inch pvc pipe, kh_ 0.5 inch pvc pipe, kh_ 4 inch pvc tee , kh_ 3 inch pvc tee , kh_ 2.5 inch pvc tee , kh_ 2 inch pvc tee , kh_ 1.5 inch pvc tee , kh_ 1.25 inch pvc tee , kh_ 1 inch pvc tee , kh_ 0.75 inch pvc tee , kh_ 2 inch gi pipe nipple 1mtr, kh_ 0.75 inch gi pipe nipple 1 feet, kh_ 0.5 inch gi pipe nipple 1 feet, kh_ 2.5 inch gi non return valve, kh_ 2 inch gi non return valve, kh_ 0.75 inch gi elbow & collar, kh_ 0.5 inch gi elbow & collar, kh_ 2.5 inch gi collar h or v, kh_ 2 inch gi collar h or v, kh_ 1.25 inch gi collar, kh_ 2.5 inch gi bend, kh_ 2 inch gi bend, kh_ 1.25 inch gi bend, kh_ 4 inch pvc pipe collar, kh_ 3 inch pvc pipe collar, kh_ 2.5 inch pvc pipe collar, kh_ 2 inch pvc pipe collar, kh_ 1.5 inch pvc pipe collar, kh_ 1.25 inch pvc pipe collar, kh_ 1 inch pvc pipe collar, kh_ 0.75 inch pvc pipe collar, kh_ 0.5 inch pvc pipe collar, kh_ 4 inch pvc pipe, kh_ 3 inch pvc pipe, kh_ 2.5 inch pvc pipe, kh_ 2 inch pvc pipe, kh_ 1.5 inch pvc pipe, kh_ 1.25 inch pvc pipe, kh_ 1 inch pvc pipe, kh_ 4 inch pvc elbow, kh_ 3 inch pvc elbow, kh_ 2.5 inch pvc elbow, kh_ 2 inch pvc elbow, kh_ 1.5 inch pvc elbow, kh_ 1.25 inch pvc elbow, kh_ 1 inch pvc elbow, kh_ 0.75 inch pvc elbow, kh_ 0.5 inch pvc elbow, hk_ solvent cement 50, hk_ solvent cement 100, kh_ 3 inch pvc joint collar, kh_ 2.5 inch pvc joint collar, kh_ 2 inch pvc joint collar, kh_ 4 inch pvc ball valve, kh_ 3 inch pvc ball valve, kh_ 2.5 inch pvc ball valve, kh_ 2 inch pvc ball valve, kh_ 1.5 inch pvc ball valve, kh_ 1.25 inch pvc ball valve, kh_ 1 inch pvc ball valve, kh_ 0.75 inch pvc ball valve, kh_ 0.5 inch pvc ball valve, hk_ 1 inch cpvc union and tank nipple, hk_ 0.75 inch cpvc union and tank nipple, kh_ 1 inch cpvc pipe, kh_ 0.75 inch cpvc pipe, kh_ cpvc gum 29ml, kh_ 1 inch cpvc tee, fta, mta, kh 0.75 inch cpvc tee, fta, mta, kh_ 1 inch cpvc elbow & collar, kh_ 0.75 inch cpvc elbow & collar, kh_ 1 inch cpvc ball valve, kh_ 0.75 inch cpvc ball valve, kh_ thrust bearing & bottom, hk_ solvent cement 250, kh_ stick & paper, kh_ 3 inch pvc mta & fta & end cap, kh_ 2.5 inch pvc mta & fta & end cap, kh_ 2 inch pvc mta & fta & end cap, kh_ 1.5 inch pvc mta & fta & end cap, kh_ 1.25 inch pvc mta & fta & end cap, kh_ 1 inch pvc mta & fta & end cap, kh_ 0.75 inch pvc mta & fta & end cap, kh_ 0.5 inch pvc mta & fta & end cap, kh_ plunger rod 3 meter, kh_ impellers, kh_ 1.5 inch hdpe pipe, kh_ 1.25 inch hdpe pipe, kh_ hdpe end connector, kh_ gm upper valve, kh_ 1.25 inch gi pipe, kh_ gargen pipe 1 inch , kh_ gargen pipe 0.75 inch , kh_ stg bush, kh_ do bush, kh_ rotor bush, kh_ 3hp v4 sm motor pump 30stage, kh_ 2hp v4 sm motor pump 20stage, kh_ x nipple, kh_ shalk thrid, kh_ 1.2 mm rewinding copper wire, kh_ pcv tape roll, kh_ 12 stage pump, kh_ 10 stage pump, kh_ nrv lather, kh_ mrf tape, kh_ m-12 boltnuts, kh_ gm lower valve, kh_ 0.75 inch gi tap, kh_ 0.5 inch gi tap, kh_ 1.25 inch gi collar long, kh_ mcb 4 pole, kh_ cylinder, kh_ 7 inch cassing pipe, kh_ borewell pedestal stand, kh_ borewell water tank, kh_ borewell head, kh_ borewell handle, kh_ bucket washer, kh_ bolt nut 5by8 inch, kh_ bolt nut 3by8 inch, kh_ 7.5 hp motor pump with 12 stage, kh_ 6 hp motor pump with 10 stage, kh_ volt meter, kh_ relay unit-motor, kh_ relay ltlk, kh_ 7.5hp preventor, kh_ 7.5hp to15hp preventor, kh_ no volt coil, kh_ indicator, kh_ 4sqmm 3core copper cable flat type, kh_ 63amps fuse unit, kh_ 100amps fuse unit, kh_ sada electrical panel board, kh_ dol electrical panel board, kh_ electrical contact kit, kh_ dol st

CTN :45340023

10 Jun, 2026 178

Mandya - Karnataka

Tender For water supply items - bl_ 6 inch threaded end cap, bl_ relay unit-motor, bl_ 7.5hp to15hp preventor, bl_ 6 inch repair collar, bl_ 5 inch repair collar, bl_ 6 inch pvc collar, bl_ 5 inch pvc collar, bl_ 6 inch pvc pipe, bl_ 5 inch pvc pipe, bl_ 6 inch pvc elbow, bl_ 5 inch pvc elbow, bl_ 6 inch pvc pipe bend, bl_ 5 inch pvc pipe bend, bl_ 6 inch plain end, bl_ 6 inch pvc tee , bl_ 5 inch pvc tee , bl_ 6 inch mta, bl_ 5 inch mta, bl_ 6 inch fta, bl_ 5 inch fta, bl_ over tank gatevalve gm rod lathe threading charge and service, bl_ starter board wiring electrical service and fitting , bl_ hand pump lifting erection and service, bl_ motor lifing erection and service fitting , bl_ motor rewinding labour and workshop turning fitting charges , bl_ volt meter, bl_ shalk thrid, bl_ 1.2 mm rewinding copper wire, bl_ relay ltlk, bl_ 7.5hp preventor, bl_ pcv tape roll, bl_ 12 stage pump, bl_ 10 stage pump, bl_ no volt coil, bl_ mrf tape, bl_ indicator, bl_ 4sqmm 3core copper cable flat type, bl_ 63amps fuse unit, bl_ 100amps fuse unit, bl_ sada electrical panel board, bl_ dol electrical panel board, bl_ electrical contact kit, bl_ dol starter ltlk, bl_ dol starter m, bl_ 7 inch cassing pipe, bl_ contactor unit, bl_ 2.5 inch bore clamp, bl_ 2 inch bore clamp, bl_ amps meter, bl_ 2 inch gi pipe, bl_ x nipple, bl_ plunger rod 3 meter, bl_ nrv lather, bl_ m-12 boltnuts, bl_ impellers, bl_ gm lower valve, bl_ gm upper valve, bl_ 0.75 inch gi tap, bl_ 0.5 inch gi tap, bl_ 1.25 inch gi pipe, bl_ 1.25 inch gi collar long, bl_ mcb 4 pole, bl_ cylinder, bl_ borewell pedestal stand, bl_ borewell water tank, bl_ borewell head, bl_ borewell handle, bl_ bucket washer, bl_ stg bush, bl_ do bush, bl_ rotor bush, bl_ bolt nut 5by8 inch, bl_ bolt nut 3by8 inch, bl_ 7.5 hp motor pump with 12 stage, bl_ 6 hp motor pump with 10 stage, bl_ thrust bearing & bottom, bl_ solvent cement 250, bl_ solvent cement 50, bl_ solvent cement 100, bl_ stick & paper, bl_ 3 inch pvc mta & fta & end cap, bl_ 2.5 inch pvc mta & fta & end cap, bl_ 2 inch pvc mta & fta & end cap, bl_ 1.5 inch pvc mta & fta & end cap, bl_ 1.25 inch pvc mta & fta & end cap, bl_ 1 inch pvc mta & fta & end cap, bl_ 0.75 inch pvc mta & fta & end cap, bl_ 0.5 inch pvc mta & fta & end cap, bl_ 1.5 inch hdpe pipe, bl_ 1.25 inch hdpe pipe, bl_ hdpe end connector, bl_ gargen pipe 1 inch , bl_ gargen pipe 0.75 inch , bl_ 1 inch cpvc union and tank nipple, bl_ 0.75 inch cpvc union and tank nipple, bl_ cpvc gum 29ml, bl_ 1 inch cpvc ball valve, bl_ 0.75 inch cpvc ball valve, bl_ 3hp v4 sm motor pump 30stage, bl_ 2hp v4 sm motor pump 20stage, bl_ 4 inch pvc pipe collar, bl_ 3 inch pvc pipe collar, bl_ 2.5 inch pvc pipe collar, bl_ 2 inch pvc pipe collar, bl_ 1.5 inch pvc pipe collar, bl_ 1.25 inch pvc pipe collar, bl_ 1 inch pvc pipe collar, bl_ 3 inch pvc joint collar, bl_ 2.5 inch pvc joint collar, bl_ 2 inch pvc joint collar, bl_ 4 inch pvc ball valve, bl_ 3 inch pvc ball valve, bl_ 2.5 inch pvc ball valve, bl_ 2 inch pvc ball valve, bl_ 1.5 inch pvc ball valve, bl_ 1.25 inch pvc ball valve, bl_ 1 inch pvc ball valve, bl_ 0.75 inch pvc ball valve, bl_ 0.5 inch pvc ball valve, bl_ 1 inch cpvc pipe, bl_ 0.75 inch cpvc pipe, bl_ 1 inch cpvc tee, fta, mta, bl 0.75 inch cpvc tee, fta, mta, bl_ 1 inch cpvc elbow & collar, bl_ 0.75 inch cpvc elbow & collar, bl_ 0.75 inch pvc pipe collar, bl_ 0.5 inch pvc pipe collar, bl_ 4 inch pvc pipe, bl_ 3 inch pvc pipe, bl_ 2.5 inch pvc pipe, bl_ 2 inch pvc pipe, bl_ 1.5 inch pvc pipe, bl_ 1.25 inch pvc pipe, bl_ 1 inch pvc pipe, bl_ 0.75 inch pvc pipe, bl_ 0.5 inch pvc pipe, bl_ 4 inch pvc elbow, bl_ 3 inch pvc elbow, bl_ 2.5 inch pvc elbow, bl_ 2 inch pvc elbow, bl_ 1.5 inch pvc elbow, bl_ 1.25 inch pvc elbow, bl_ 1 inch pvc elbow, bl_ 0.75 inch pvc elbow, bl_ 0.5 inch pvc elbow, bl_ 2 inch gi pipe nipple 1mtr, bl_ 0.75 inch gi pipe nipple 1 feet, bl_ 0.5 inch gi pipe nipple 1 feet, bl_ 2.5 inch

CTN :45342597

08 Jun, 2026 178

Mandya - Karnataka

Tender For supply of water supply items to h malligere grama panchayath - hmm_ 1 inch pvc pipe bend, hmm_ 0.75 inch pvc pipe bend, hmm_ 0.5 inch pvc pipe bend, hmm_ 2.5 inch service saddle 75x20mm, hmm_ 2 inch service saddle 63x20mm, hmm_ 4 inch pvc pipe bend, hmm_ 3 inch pvc pipe bend, hmm_ 2.5 inch pvc pipe bend, hmm_ 2 inch pvc pipe bend, hmm_ 1.5 inch pvc pipe bend, hmm_ 1.25 inch pvc pipe bend, hmm_ 4 inch pvc tee , hmm_ 3 inch pvc tee , hmm_ 2.5 inch pvc tee , hmm_ 2 inch pvc tee , hmm_ 1.5 inch pvc tee , hmm_ 1.25 inch pvc tee , hmm_ 1 inch pvc tee , hmm_ 0.75 inch pvc tee , hmm_ 0.5 inch pvc tee , hmm_ 0.75 inch gi elbow & collar, hmm_ 0.5 inch gi elbow & collar, hmm_ 2.5 inch gi collar h or v, hmm_ 2 inch gi collar h or v, hmm_ 1.25 inch gi collar, hmm_ 2.5 inch gi bend, hmm_ 2 inch gi bend, hmm_ 1.25 inch gi bend, hmm_ 0.75 inch pvc pipe collar, hmm_ 0.5 inch pvc pipe collar, hmm_ 4 inch pvc pipe, hmm_ 3 inch pvc pipe, hmm_ 2.5 inch pvc pipe, hmm_ 2 inch pvc pipe, hmm_ 1.5 inch pvc pipe, hmm_ 1.25 inch pvc pipe, hmm_ 1 inch pvc pipe, hmm_ 0.75 inch pvc pipe, hmm_ 0.5 inch pvc pipe, hmm_ 4 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 0.5 inch pvc elbow, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 2.5 inch gi non return valve, hmm_ 2 inch gi non return valve, hmm_ 4 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1 inch pvc pipe collar, hmm_ 3 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 2 inch pvc joint collar, hmm_ 4 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 0.5 inch pvc ball valve, hmm_ 1 inch cpvc pipe, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc elbow & collar, hmm_ thrust bearing & bottom, hmm_ solvent cement 250, hmm_ solvent cement 50, hmm_ solvent cement 100, hmm_ stick & paper, hmm_ 3 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 1.5 inch hdpe pipe, hmm_ 1.25 inch hdpe pipe, hmm_ hdpe end connector, hmm_ gargen pipe 1 inch , hmm_ gargen pipe 0.75 inch , hmm_ 1 inch cpvc union and tank nipple, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ cpvc gum 29ml, hmm_ 1 inch cpvc ball valve, hmm_ 0.75 inch cpvc ball valve, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 2hp v4 sm motor pump 20stage, hmm_ x nipple, hmm_ plunger rod 3 meter, hmm_ nrv lather, hmm_ m-12 boltnuts, hmm_ impellers, hmm_ gm lower valve, hmm_ gm upper valve, hmm_ 0.75 inch gi tap, hmm_ 0.5 inch gi tap, hmm_ 1.25 inch gi pipe, hmm_ 1.25 inch gi collar long, hmm_ mcb 4 pole, hmm_ cylinder, hmm_ borewell pedestal stand, hmm_ borewell water tank, hmm_ borewell head, hmm_ borewell handle, hmm_ bucket washer, hmm_ stg bush, hmm_ do bush, hmm_ rotor bush, hmm_ bolt nut 5by8 inch, hmm_ bolt nut 3by8 inch, hmm_ 7.5 hp motor pump with 12 stage, hmm_ 6 hp motor pump with 10 stage, hmm_ volt meter, hmm_ shalk thrid, hmm_ 1.2 mm rewinding copper wire, hmm_ relay ltlk, hmm_ 7.5hp preventor, hmm_ pcv tape roll, hmm_ 12 stage pump, hmm_ 10 stage pump, hmm_ no volt coil, hmm_ mrf tape, hmm_ indicator, hmm_ 4sqmm 3core copper cable flat type, hmm_ 63amps fuse unit, hmm_ 100amps fuse unit, hmm_ sad

Valve Regulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector