Latest valve wheel Tenders | Government valve wheel Tenders

State Government

CTN :44803835

15 Apr, 2026 1.95 Crore

Multi City - Telangana

Tender For arresting water supply leakage and replacing the damaged 200mm dia/300mm dia ms air tee pipe manifolds existing on 700mm and 300mm dia flanged stem pipe, 200mm dia sluice valves and air valves existing on ms 2375mm dia pumping main and 2200mm dia ms gravity main of kdwsp phase-iii from kodandapur to sahebnagar and also to replace the damaged ms air tee pipes, 200mm dia air valves and sluice valves during emergency on krishna phase-i and ii system from kodandapur to sahebnagar under sd-i of trans.div.iii, sahebnagar

State Government

CTN :44805793

17 Apr, 2026 8.00 Lacs

Jodhpur - Rajasthan

Tender For proposal for maintanence of 600mm di pipeline air valves and other allied works under csd kabeernagar city div i jodhpur

corporations/Associations/Others

CTN :44796518

13 May, 2026 816.21 Crore

Raichur - Karnataka

Tender For survey, investigation, preparation of design & drawings, installation, testing and commissioning of lift headworks, electrical sub-station, transmission line, terminal bay, rising main, delivery chamber and construction of pipe distribution network including structures and scada compatible sluice valves, butterfly valves, flow meters, discharge control meters and air valves, scour valves, butterfly valves, discharge control meters providing intermediate sump wherever necessary in complete manner etc piped distribution network for 19,600 ha. of command area of pamanakallur and other villages in maski taluk of raichur district from distributary 5a of narayanpura right bank canal including supply of spares, accessories and tools including operation and maintenance of the entire system for five years from the date of successful commissioning of the entire system on turnkey basis.

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44776302

17 Apr, 2026 1.27 Crore

Sonipat - Haryana

Tender For 1228 - rectification of leakage, disconnection of insanitary connection and repair of ac/pvc/hdpe/gi/ci/di rising and distribution pipe line including main pipeline from maharana partap to jajjal mbs, air valves and sluice valves of all sizes - 1228 - rectification of leakage, disconnection of insanitary connection and repair of ac/pvc/hdpe/gi/ci/di rising and distribution pipe line including main pipeline from maharana partap to jajjal mbs, air valves and sluice valves of all sizes in all colonies of sonepat town and villages covered in eastern side of railway line under mc sonepat and relaying of cement concrete etc. and all other works contingent there to for 1 year.

CTN :44454736

15 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of procurement of materials for fitment of isolating valves in hp air system e e -shouldered end plus retaining nut to be brazed , threaded end to be brazed , multibranch piece for copper piping od20 and od10 , shouldered end to be brazed , retaining nut to be brazed , shouldered end plus retaining nut

CTN :44764471

16 Apr, 2026 NA

Naliya - Gujarat

Tender For providing of custom bid for services - plastering and repair of civil structures building walls only excluding painting cost,custom bid for services - painting of civil structures building walls only excluding plastering cost,custom bid for services - painting of pipelines of size 4/6 inch,custom bid for services - painting of box strainer,custom bid for services - painting of valves/nrvs,custom bid for services - painting of bpis main / alternate gate,custom bid for services - painting of sample pit cover,custom bid for services - painting of earth pit cover,custom bid for services - painting of fws/dump drum,custom bid for services - painting of loading gantry,custom bid for services - painting of fire engine,custom bid for services - painting of air compressor,custom bid for services - painting of atf pump,custom bid for services - painting of shutter gate,custom bid for services - painting of electrical pole,custom bid for services - painting of tank manhole cover,custom bid for services - painting of air vent 3 inch,

Central Government And Public Sector

CTN :44700712

16 Apr, 2026 NA

Bangalore - Karnataka

Tender For supply of three piece design regular port,fire safe design ball valve, 40mm size forwater/air application with 10 kgs/sq:cm operating pressure.1)valve pressure class: class 150, 2)end connection: flanged raised face as per ansi b16.5. 3)material:body astm a 216 gr wcb,ball& stem: aisi 304(non-magnetic), seats & seals: virgin ptfe. 4)lever carbon steel, 5)studs & nuts to high tensile quality. make: hawa, amco l&t valves, flocon and racer only. note: 1)one number sample to be supplied for approval before bulk supply. 2)warranty minimum 12 months from the date of supply.3)make offered shall be indicated 4)only authorised dealer/manufacturers need to quote.5)authorisation letter from manufacturer shall accompany the offer. ]

corporations/Associations/Others

CTN :44352790

11 May, 2026 7.54 Lacs

Madurai - Tamil Nadu

Tender For corrigendum : extending 4 nos. of air valves including dismantling of exisiting air valve chambers and construction of new chamber etc. in raw-water transmission main of mullai periyar water supply scheme.

Central Government/Public Sector

CTN :44773685

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of valves for emu's / memu's air suspension bogies comprising of (1)levelling valve to rdso sketch -k 1049 alt.2, qty.=02 nos. (2) duplex check valve (set to act at pressure deferential of 1.5 %b1 0.12 kg/cm2 to rdso sketch -k 1051 alt.1 qty.=01 no. [one set consisting of 02 items having total of 03 nos./set ]

Valve Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector