Tender For bid to ras corrigendum : supply of dclc solutions for hpc testbed cluster cdac pune - cooling distribution unit rack based with primary and secondary connection kit, hose, flange etc. , under floor piping work and connection to cdus and manifolds along with grooved fittings etc. , supply and return manifold 42u with 36 nodes each side , cold plate pair suitable for intel sapphire-emerald rapids. along with tube of appropriate length with quick disconnect dripless connectors , coolant for secondary network , any other items -components required to complete the scope , any other charges required to complete the dclc solutions in total. , charges towards - installation, commissioning, testing etc.
Tender For supply of seals and spares for raph of boilers - complete set of hot end radial soft touch seal and one set of hot end rotor post seal with hardwares for bhel make rotary air pre-heater 22 vir 1650- 14353100760_1_1000069938_uom_st , complete set of cold end radial seal and one set of cold end rotor post seal with hardwares for bhel make rotary air pre-heater 22 vir 1650-14353001030_2_1000069938_uom_set , complete set of hot end and cold end circumferential seal with hardwares for bhel make rotary air pre-heater 22 vir 1650- 14353001040_3_1000069938_uom_set , complete set of hot end radial soft touch seal with hardwares for bhel make rotary air pre-heater 24.5 vit 1650- 14353000140_4_1000069938_uom_st , complete set of cold end radial seal with hardwares for bhel make rotary air pre-heater 24.5 vit 1650- 14353000150_5_1000069938_uom_st , complete set of hot end and cold end bypass seal with hardwares for bhel make rotary air pre-heater 24.5 vit 1650- 14353000160_6_1000069938_uom_st , complete set of axial seal with hardwares for bhel make rotary air preheater 24.5 vit 1650- 14353001160_7_1000069938_uom_set , complete set of hot end axial seal plate to sector plate seals with hardwares for bhel make raph 24.5 vit 1650 - 14353000000_8_1000069938_uom_set , complete set of cold end axial seal plate to sector plate seals with hardwares for bhel make rotary air pre-heater 24.5 vit 1650-14353000010_9_1000069938_uom_set , cold end rotor post seal for bhel make rotary air pre-heater 24.5 vit 1650-14353047270_10_1000069938_uom_ea , hot end rotor post seal for bhel make rotary air pre-heater 24.5 vit 1650-14353041890_11_1000069938_uom_ea , complete set of cold end radial seal with hardware for b.h.e.l.make 25.5 vit 2000 raph14353040120_12_1000069938_uom_set , complete set of cold end bypass seal with hardware for b.h.e.l.make 25.5 vit 2000 raph14353040130_13_1000069938_uom_set , complete set of cold end rotor post seal with hardware for b.h.e.l. make 25.5 vit 2000 raph14353040140_14_1000069938_uom_set , complete set of hot end bypass seal with hardware for b.h.e.l.make 25.5 vit 2000 raph14353040160_15_1000069938_uom_set , complete set of hot end rotor post seal for b.h.e.l. make 25.5 vit 2000 raph-14353040170_16_1000069938_uom_set , complete set of axial seals with hardwares for b.h.e.l. make 25.5 vit 2000 raph14353040180_17_1000069938_uom_set , complete set of hot end radial soft seal with hardware for b.h.e.l. make 25.5 vit 2000 raph14353040190_18_1000069938_uom_set , filter and lubricator for raph type 22.5 vir 1750- 14353100110_20_1000069938_uom_set , deluge pipe assly for raph 24.5 vit 1650- 14353000030_21_1000069938_uom_set , air pre-heater guide bearing lube oil filter for aph type 24.5 vit 1650-14353046220_23_1000069938_uom_ea , air preheater support bearing lube oil filter for aph type 24.5 vit 1650-14353046390_24_1000069938_uom_ea , hot end sector plate roller for b.h.e.l. make 25.5 vit 2000 aph-14353040280_32_1000069938_uom_ea , hot end axial seal plate to sector plate seal for b.h.e.l. make 25.5 vit 2000 aph-14353040290_33_1000069938_uom_set , hot end sector plate roller for b.h.e.l. make 24.5 vit 1650 aph14353000270_43_1000069938_uom_ea , cold end air seal for b.h.e.l. make 22 vir 1600 aph14353001100_48_1000069938_uom_ea , raph gb taperlock bush and adaptor sleeve along with 03 nos of cap screws for b.h.e.l. make 22 vir 1650 aph14353001120_57_1000069938_uom_set , cold end rotor grating for aph type 22 vir 1650- 14353028190_58_1000069938_uom_st
Tender For supply of plate type heat exchanger with one set spare gasket assembly for hydraulic po wer pack of electric arc furnace to following specification . 1) capacity : 30.0 kw. 2) design temperature : 100 degree (hot & cold). 3) design pressure : 10 bar (hot & cold). 4) test press ure : 13 bar (hot & cold). 5) input locations : s1/s3 (hot), s2/s4 (cold). 6) weight : empty 138 kg , full 142 kg. 7) plate pack length : 48.0 mm + or - 3%. 8) material of gasket : viton only. 9) no. of plates : 14. 10) plate material & thickness : ss - 316 & 0.5 mm. 11) flow rate of oil : 122 lpm. 12) flow rate of water : 71 lpm. 13) make: tanter to model no. gld013 x 14 or kaarthik heat t ransfer to model no. kpd20d x 14 - viton or exactly equilvalent makes in thermosys or alfa lava. [ warranty period: 12 months after the date of delivery ]
Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs
Tender For supply of office contigency items - visitor register 500 pages as per sample , steel dust bin ss waste container 15 ltr capacity round 10 inch x height 14 inch as per sample , exhaust fan 15 inch 1400 rpm heavy duty , window curtain full size 240 gsm 5 ft x 4 ft colour as per approved choice , door curtain full size 240 gsm 8 ft x 4 ft colour as per approved choice , borosil glass 295 ml set of 6 pcs , tea cup set of 6 pcs good quiality , water hot and cold dispenser with 20 ltr bottle make voltas , water camper 5 ltr capacity make milton , masquito repellant make allout , table blazer cloth 4 ft x 5 ft blue good quality , foot mat jute 4 ft x 2 ft good quality as per sample , electric kettle 1.8 l to 2 ltr cap 1500 w , personal digital weight machine 150 kg with large lcd display and 4 sensor technology , table glass 4 ft x 2 ft thickness 8 mm toughned , cash book 500 pages as per sample , cup and saucer set of 12 pcs good quality , mirror for bathroom 12 inch x 18 inch , towel large size 400 gsm 100 percent cotton size 75 cm x150 cm , digital wall clock 25 pt 4 cm x 25 pt4 cm x 3 pt 5 cm , glass coster set of 6 pcs good quality , wall clock quartz 32 cm round ajanta , mattress 6 ft x 3 ft x 4 inch isi marked , cotton hand towel size 81 pt 3 l x 40 pt 6 w centimeters , desert cooler plastic body 100 ltr cap with integral caster wheels with honeycomb pads , ss chapati bhatti size 24x48x12 inch gas operated 3 burner plate thickness 10 mm body material ss 304 stainless steel , led television screen size 65 inch, smart tv ultra hd 4k 3840 x 2160 pixels , sound system wireless bluetooth portable 50 watt pa speaker tone control with mp3 player bluetooth with 2 mic usb sd make ahuja bta 880 , search light 55w halogen warm white 2700k heavy duty rechargeable hand held torch abs 1600 lumens , ready gadi oblique three wheeler trolley load capacity 400 kg for ration material handling size 5 ft x 3 ft with handle as per sample , gref tee flag size 12 inch x 18 inch duly embroidery as per sample , red dari 8 ft x 6 ft good quality as per sample , flower pot as per sample , brass flower pot as per sample , shamiana tent 9 pt 15 mtr x 9 pt 15 mtr with poles side walls and all accessories as per dgs and d specification no g oblique tex oblique t 59 , water cooler 60 ltr capacity body material ss304 stainless steel power supply 230v 50hz 1ph refrigerant r 134s double faucet tap for office use , fogging machine manual starting hand carried fuel tank capacity 2 ltr pesticide tank capacity 5 ltr engine out put 17 pt 5 kw , notice board 2 ft x 4 ft soft board core material type pin up type , white board 4 ft x 4 ft dry erase writing board with aluminium frame , electric ceiling type fan (v3) isi marked to is 374 (q2) , table fan / wall mount fan / ceiling mount fan as per is 555 (q3) , electric pedestal type fan and regulator as per is 1169 (q2)
Tender For custom bid for services - pdo1c25031 agency for health assessment of spring supports at different process units of paradip refinery.work of agency shall include comprehensive health assessment of all the spring supports installed in various units. the agency shall depute engineer/expert technician to inspect the spring supports during running condition as well as in shutdown once iocl gives advice to depute. the scope shall include but not be limited to the following: a) collection of available data of existing spring supports from iocl. b) site survey and health assessment of supports in hot condition / cold condition. c) super visioning and/or revisioning/rectification of spring supports, wherever possible. d) agency will carry out survey and the survey shall capture the name plate details like tag number, location, spring support type, hot load, travel, cold load setting etc during the field survey in the list (as per format provided by engineer-in-charge).e) provide all the spring supports with new metallic tags, where ever name plate are missing, incorporating the survey date & tag number, location as per the list.f) checking of the physical condition of the spring supports: carry out checking of all spring supports in the field and provide recommendations for repair (with anticipated spare parts) or replacement in the above report. g) submit the final report in the prescribed format to iocl for its review and approval .report shall clearly indicate that no. of supports rectified, supports which require replacement of spares (along with list of spares) and supports which require complete replacement (tag wise) and give recommendations for remedy/rectification of abnormalities, if any. h) vendor shall execute all the jobs to the full satisfaction of engineer-in-charge. i) job will be carried out in phases as instructed by eic. j) vendor shall provide one day training on spring supports. this training shall include different types of spring supports, their working principles, inspection and maintenance activities required..