Latest vapour barrier coating Tenders | Government vapour barrier coating Tenders

Central Government/Public Sector

CTN :43304748

20 Jan, 2026 NA

Fatehpur-Up - Uttar Pradesh

Tender For corrigendum : supply of supply- lattice structure: mild steel yield stress e250, zinc coating 610gms/sqm , supply- lattice structure: high tensile steel yield stress e350, zinc coating 610gms/sqm

CTN :43414033

15 Jan, 2026 10.09 Lacs

Thiruvananthapuram - Kerala

Tender For construction of madakkathara grama panchayath stadium in ollur lac, thrissur- supply and installation of outdoor gym equipment - open gym equipment, od263824/2025-2026 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material.foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263826/2025-2026: air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin's ø 25mm m.s. bright bar pin. circlips- a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263830/2025-2026 : leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is ø 60 mm od “b” class gi pipe. seat frame - ø 42 mm od “b” class gi pipe. leg press back rest should be angled in 120 - 130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest – 380 x 275 x 60 mm thick high- density polyethylene (hdpe) blow molded with m

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

Central Government/Public Sector

CTN :43531834

03 Feb, 2026 NA

Perambur - Tamil Nadu

Tender For supply of galvanised iron wire (gi wire) 8 swg coated with heavy zinc coating to prevent rust and corrosion resistance for electrical earth ground conforming to is:280, is:4826, is:2633 with latest amendment. the test report from nabl/irda/any central govt. laboratory as per the relevant standards. ]

Central Government/Public Sector

CTN :43532223

19 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply of fs all steel lock nut, m24 - property class-10 ----to specification no. din6925 /din980m.make: m/s.flaig + hommel gmbh, germany.zinc flake coating (geomet321 or equivalent)with top coat, without any hexavalent chromium, without any integrated or separately added lubricant. minimum salt spray test life of 1000 hours is to be ensured. special condition :suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. [ warranty period: 30 months after the date of delivery ]

CTN :43534590

02 Feb, 2026 NA

Kanchrapara - West Bengal

Tender For supply of hexagon flange locking screw to size m16 x 45, as per is 1364 part 2 of 2002 property class: 10.9, as per is: 1367 part 3 of 2002 with zinc flake coating as per iso 10683 of 2018. make: wurth, lps bossard or skf fastners only. materials to be procured from authorized dealers only with test certificate. [ warranty period: 30 months after the date of delivery ]

CTN :43534593

02 Feb, 2026 NA

Kanchrapara - West Bengal

Tender For supply of hexagon flange locking screw to size m12 x 30, as per is 1364 part 2 of 2002 property class: 10.9, as per is: 1367 part 3 of 2002 with zinc flake coating as per iso 10683 of 2018. make : skf fastners or lps bossard or wurth or keller and kalmbach or rimco overseas or micro metals only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43534643

03 Feb, 2026 NA

Perambur - Tamil Nadu

Tender For supply of galvanised iron wire (gi wire) 6 swg coated with heavy zinc coating to prevent rust and corrosion resistance for electrical earth ground conforming to is:280, is:4826, is:2633 with latest amendment. the test report from nabl/irda/any central govt. laboratory as per the relevant standards. [ warranty period: 12 months after the date of delivery ]

CTN :43534757

05 Feb, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of bracket as per icf drg no 58111014. note: material as per irs m41-97 and to be supplied with red oxide zinc chromate primer coating [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43466043

16 Jan, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of alkyed protective coating enamel- grey - temperature index 130 to aa27513 rev. 02. , self etch primer base with accelerator in the ratio 1: 1 to specification aa56103, rev. 02. , chemical resistant epoxide red oxide zinc phosphate priming paint bhel corp spec aa56105 rev no. 07 , high quality full glossy out door finishing traffic green paint to specification aa56126, rev. 06. , high quality full glossy out door finishing paint light grey shade no. 631 to aa56126, rev. 06. , high quality full glossy out door finishing paint dark grey shade no. 632 to aa56126, rev. 06. , high quality full glossy out door finishing black paint to aa56126, rev. 06 , oil resistant non-yellowing full glossy white paint to specification bp56183 rev. 02. , aluminium paint for general purposes to specification aa56128, rev. 05.

Vapour Barrier Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector