Latest vapour extractor cock Tenders | Government vapour extractor cock Tenders

Central Government/Public Sector

CTN :45737328

13 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of lpg gas cylinder (domestic) with regulator and rubber pipe [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736156

07 Jul, 2026 NA

Kota - Rajasthan

Tender For supply of pressure gauge for d.a./lpg gas regulator, working pressure 0-2.5 kg/cm2, dial size 2 inch, with minimum 6 months warranty and valid calibration certificate from a government-approved/nabl- accredited laboratory. make: weldstar/esab/wika/ramco/techno or equivalent reputed brand. [ warranty period: 6 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45609248

06 Jul, 2026 NA

Medchal-T - Telangana

Tender For corrigendum : 1-1/2" inch lpg control valve without actuator , 3/4" inch pilot lpg regulator inlet pressure 7 psi max outlet pressure range 18 to 40 mbar , 1/2" inch pressure balance ratio regulator for lpg service , uv sensor for lpg burner flame detection , dn40 main gas regulator for lpg service 5 bar max inlet pressure outlet pressure range 85-180 mbar , ignition electrode for heater , pilot burner without ignition rod , 1-1/2 inch solenoid valve normally closed auto reset fofc with cpi switch for lpg service 240 volts , dn25 pressure relief valve for lpg service

CTN :45715074

15 Jul, 2026 NA

Multi City - Multi State

Tender For supply of 2.flash back arrestor (dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/ iso:5175-1/ is:11006/2011,(ra2021),amd-1 of dec.2013 standards with flame arrestor (fa) and non-return valve (nrv) and thermal cut off valve (tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8" lh to en 560/iso 3253 standards. make: messer (dgn fuel) or esab (protex ra) or gce (fr-34 r fuel) or weldstar or witt only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006/2011,(ra-2021), amd-1 of dec 2013 [ warranty period: 30 months after the date of delivery ] ]

CTN :45673261

08 Jul, 2026 1.70 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of welding rubber hose pipe esab make size 08mm black 100 mtr , welding rubber hose pipe esab make size 08mm red 100 mtr , welding lead cable 70sqmm copper esab make 100ml suitable for 70 amp load , welding lead cable 70sqmm aluminium esab make 100m suitable for 70 amp load , cutter esab make , hand glove leather esab make , welding holder 600 amp esab make , welding holder 1000 amp esab make , welding black glass maclein germany , welding white glass maclein germany , welding screen , spark lighter , cutting nozzle for industrial lpg 1 16 and 5 64 , regulator for industrial lpg , oxygen regulator esab make single stage , silicon brass gas welding rod 1 8 inch , silicon brass gas welding rod 1 16 inch , ador make welding machine model champ t 400 400 amp

Central Government/Public Sector

CTN :45588570

21 Jul, 2026 NA

Perambur - Tamil Nadu

Tender For corrigendum : supply of vapour extractor cock top cap to irs drg. no. w/tf-1873 as per drg.no. drg. no. w/tf-1873 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45544484

25 Jun, 2026 NA

Ganganagar - Rajasthan

Tender For corrigendum : supply of cutting tourch n , oxygen regulator d watch , da flash back arrestor for cut , da flash back arrestor for reg , brizing rod , lpg litter , welding flux , white goggle , black goggle

CTN :45647299

30 Jun, 2026 5.00 Lacs

Sonipat - Haryana

Tender For purchase of the mill store general items - purchase of the mill store general items., angle grinder 5 (bosch make) (3039) ag_ gwsb6-125, brass electrode 1/8 (2010), brass o (2952) 250 ml bottle, carbide grooving tools (6415)(sandvick make) 50 digree-1 no. 35 digree-1 no., 45 digree-1 no. meschert groove cutting tool 8 mm-1 nos., carbide tip (5244) triangular shape), carbide tips size (3002) triangular shape, chain block cap. 2 ton (20 mtr.) (induf make) (3998) p series, load chain 20 mtr., hand wheel chain 20 mtr., chain pully block-3 ton (6051)(induf make) p series, load chain-20 mtr. hand wheel chain-20 mtr., chain pully block model: p 1 ton (3997) (induf make) p series, load chain 20 mtr, hand wheel chain-20 mtr., cotton waste (2944), crbide tip 1 (5242) triangular shape, emery cloth smooth (5226) (universal carborandam make), emery paste fine (5225), emmery cloth rough (2947) (universal carborandam make), emmery paste rough (4259) (universal carborandam make), emmery tape (2946), flux for brass branzotactic (5641), gas checking regultar for oxygen (4255) (esab make), glass black for welding screen (2005), grahite power smooth (5224) (universal carborandam make), graphite powder rough (2851) (universal carborandam make), grinder wheel dish type 8 (3018) (universal carborandam make), grinder wheel dish type 8 (3018) (universal carborandam make), grinder wheel green 150-25-16mm (3042) (universal carborandam make), l.p. gas nozzle (3807) (esab make) size-1/16 , l.p.g. gas regulator (3809) (esab make), l.p.g. gas cutter complete (3810) (esab make), lock tite no. 270 (4463) 250ml, lock tite no. 242 (4415) 250ml, lock tite no. 638 (4414) 250ml, m seal (3052), old dhoti (1273), oxygen gas regulator (3526) (esab make), pipe wrench 12 (1237) (taparia/inder/venus/bosch/mirinda, power heak saw blade (2942)(mirinda make) width-1.5 length-18 , pvc pipe 1 (2185) (transparent type make), r. hose pipe 1 (4441) (euroflex make) steel wire braided steam, high temperature use-350 dig. celcuis, red lead (3048) ( diwaldi make), rubber hose pipe (3819) (eurofles make) steel wire braided steam, high temperature use-350 dig. celcuis, rubber hose pipe for gas (4128) (esab make), split pin x 2 (2985) (champion make), split pin 3/16 x 2 (2984) ( champion make), tap set 5/8 (5918) (totem make), tool bits x4 (3004) (mirinda s 400 make), tool bits x 3 (3007) (mirinda s 400 make), tool bits x 4 (3008) (mirinda s 400 make), tool bits x 6 (3009) (mirinda s 400 make), tool bits x 8 (4347) (mirinda s 400 make), u clamp (4180) heavy duty, u clamp for dry sheet (3898) heavy duty, welding cable (1989) (esab/dunlop make) 600 amp., cooper wire, welding goggles (1987), welding holder (2003) (esab make) 1000 amp., cooper wire, welding screen (1994), white lead (3049) 1001, wire rope (6189) (usha/martin make) heavy duty at crane use, 25 ton capacity, steel core (with test certificate), high carbon spring steel flate (2217) (75mmx10mm), m s round 1 (2223), m s square rod 1 (2230), m s flate 50mmx 5 mm (6043), m s round 2 (3399), m s round 3 (2228)

Central Government/Public Sector

CTN :45644551

29 Jun, 2026 NA

Perambur - Tamil Nadu

Tender For supply of vapour extractor cock top cap to irs drg. no. w/tf-1873 as per drg.no. drg. no. w/tf-1873 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604027

06 Jul, 2026 NA

Trivandrum - Kerala

Tender For supply of kit for vapour extractor cock as per drg. no. wa/tf-2116 in set (assembled condition) one set consisting in following itemsfrom sr. no. 1 to 7 to suit vapour extractor cock body as per drg. no. w/tf-2117.( 1. handle as per drg. no. w/tf-1877 = 01 no. 2. pin 5x83 mm as per drg. no. wa/tf-2116 item no. d = 01 no. 3. plug as per drg. no. w/tf-1872 = 01 no. 4. 12x41 square shank stud as per drg. no. wa/tf-2116 part a = 01 no. 5. cap as per drg. no. w/tf-1873 = 01 no. 6. m12 castle nut as per drg. no. wa/tf-2116 part-b = 01 no. 7. 3x32 split pin as per drg. no. wa/tf-2116 part-b = 01 no. ) [note:-the firm from which the purchase order will be placed should provide qty.- one (01) set of item no.01 to 07 as a sample to suit vapour extractor cock body as per drg. no. w/tf-2117 for practically fitting & testing at ipn depot.] [ warranty period: 30 months after the date of delivery ] ]

Vapour Extractor Cock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector