Tender For auction sale of others - scrap battery charger, diesel generator set & drill machine consisting of, (1) scrap diesel generator set engine with alternator, qty=1 no, (2) scrap diesel generator set engine, qty=1 no, (3) scrap diesel generator set engine, qty=1 no, (4) scrap diesel generator set engine with alternator, qty=1 no, (5) scrap diesel generator set engine = qty 1 no, (6) scrap petrol generator set with alternator, qty=1 no, (7) scrap drill machine, qty=1 no, (8) scrao dc electric welding generator, qty=1 nos, (9) scrap lead acid battery charger 200ah(concord), qty=1 no, (10) scrap lead acid battery charger 200ah(janson), qty=1 no, (11) scrap lead acid battery charger 40ah(amra raja), qty=2 nos, (12)scrap lead acid battery charger 40ah(concord), qty=2 nos, (13)scrap lead acid battery charger 40ah(universal), qty=2 nos. (14)scrap dc electric welding generator, qty=1 no.
Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp
Tender For supply of set of spare parts for 250 kva generator set, make: cooper corporation pvt. ltd. satara indiaengine model no. cdu102503d21. one set consisting of: - 1) exchange filter insert cc pvt. ltd. part no. e2527070/010006 qty= 01 no. 2) outer element primary for 250 kva cc pvt. ltd. part no. g281618008514 qty= 01 no. 3) inner element secondary for 250 kva c c pvt. ltd. part no. 281618008515 qty=01 no. 4) engine oilc14 plus. c c pvt. ltd. part no. ec00403 3, qty= 01 no. 5) coolant (ready to use)c c pvt. ltd. part no.ec001043, qty=01 no. 6) engine oil c14 plus ,c c pvt. ltd. part no. ec00328 11, qty= 01 no. 7) oil filter 6 cyl. tvs part no. e54430961 qty= 01 no. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of 220 amps diesel welding generator with electrical start lombardini, 15 ld 440 diesel engine+ ws220 dc alternator- complete trolley mounted set with 5 liter fuel tank ,battery, minimum 15 meter copper welding cable, earthing cable .plastic shield ,suitable for welding 5 mm rod and auxiliary ac overall rated power output of 7.5 kva or more. make: amer nsm india pvt ltd, honda, miller, kirloskar, kohler or equivalent. [ warranty period: 30 months after the date of delivery ] ]
Tender For a.mtc. sewerage scheme narnaul town, district mohindergarh for the year 2026-27. hiring of diesel generator set at malviya nagar and ram nagar disposal and hiring of diesel engine pumps sets for de-watering during monsoon season complete in all respect
Tender For comprehensive annual maintenance contract (camc) of 02 nos. of engine and 02 nos. of diesel generator set fitted with sparme/dnr on single tender basis through oem for 03 years.
Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti
Tender For wbmad/ulb/rsm/14/si/26-27 - supply of different type of municipal vehicles and to purchase required spare parts under rajpur sonarpur municipality. - purchase of cloth for garaj, purchase of hammer for garaj, oil filter for garaj car-5453, distle water (ltr.) for garaj, purchase ring spanner (21 x 23 mm) for cesspool tanks, purchase dual end spanner (21 x 23 mm) for cesspool tanks, purchase ring spanner (24 x 27 mm) for garaj, purchase ring spanner (25 x 28 mm) for garaj, purchase of uj cross for tata v30-0748, purchase of horn cross for tata v30-0748, purchase of uj cross for tata v30-0390, master cylinder for dumper-8336, cloth for dumper-8336, brake pipe for dumper-8336, crank pully, p4 for roller-1, timing seal p4 for roller-1, washer for roller-1, oil seal for roller-1, timing pully for roller-1, adjusting nut for roller-2, link pin for roller-2, split pin (1/8*1.1/4) for roller-2, washer for roller-2, radiator set for ambulance-8533, brake booster assy set for ambulance-8533, fan belt for ambulance-8533, disel filter for ambulance-8533, disel pipe (13ft) with 8 nos. clamp for ambulance-8533, banjo bolt wit washer for ambulance-8533, banjo "t" for ambulance-8533, servo pipe for ambulance-2456, brake drum (back) for ambulance-2456, brake shoe (set) for ambulance-2456, brake pad (set) for ambulance-2456, brake hose for ambulance-2456, adjustable leaf for ambulance-2456, silencer mounting for ambulance-2456, cloth for roller-5, fan belt for tractor-4561, water pump assy for roller-4, water pipe roller-4, nut bolt (1/2", kg) for all water tanks, bib cock for all water tanks, oil filter for cesspool (chassis no. mat555036r8p22447), synthetic engine oil for cesspool (chassis no. mat555036r8p22447), fuel filter assyfor cesspool (chassis no. mat555036r8p22447), fuel filter kitfor cesspool (chassis no. mat555036r8p22447), air filter primaryfor cesspool (chassis no. mat555036r8p22447), air filter safety for cesspool (chassis no. mat555036r8p22447), def filter cartidge for cesspool (chassis no. mat555036r8p22447), filler neck filter for cesspool (chassis no. mat555036r8p22447), urea water (def/ltr) for suction-jetting vehicles, oil filter for cesspool ( chassis no. mat555036r8p22491), synthetic engine oil for cesspool ( chassis no. mat555036r8p22491), fuel filter assy for cesspool ( chassis no. mat555036r8p22491), fuel filter kit for cesspool ( chassis no. mat555036r8p22491), air filter primary for cesspool ( chassis no. mat555036r8p22491), air filter safety for cesspool ( chassis no. mat555036r8p22491), def filter cartidge for cesspool ( chassis no. mat555036r8p22491), filler neck filter for cesspool ( chassis no. mat555036r8p22491), o -ring for cesspool ( chassis no. mat555036r8p22491), timer delay for tractor-5847, repairing works for tractor-5847, brake leather (set) for ambulance-1306, clutch and pressure plate set for ambulance-1306, clutch bearing for ambulance-1306, hose for tractor-8754, hose clamp for tractor-8754, repairing of radiator for tractor-8754, hose with clamp for tata v30-0390, clutch and pressure plate set for (tata v 30) - 8020b and 8027b, purchase of bearing (306, nbc) for generator of mini cesspool-1, purchase of radiator servo of dumper-8336, purchase of hydraulic hose for hyd. ladder vehicle (chassis no. mat804043s8j18788), repairing of dianamo with new carbon, pinion for tata v30-6925, repairing of dianamo with new carbon, pinion for tata v30-6991, repairing of dianamo with new carbon, pinion for tata v30-6958, repairing of dianamo with new carbon, pinion for tata v30-6863, repairing of dianamo with new carbon, pinion for tata v30 -6956, repairing of dianamo with new carbon, pinion, and armeture for tata v30- 6990, purchase of uj cross for tata v30-0748, purchase of horn cross for tata v30-0748, purchase of uj cross for tata v30-0390, fabrication and welding of lock plate, back side channel frame , i-hoock for water tank-3, repairing of dianamo with new carbon, bearing for tractor-5957, fabrication and we
Tender For supply of supply of 15 kva , supply of on load change over switch metal for four generator sets , supply of xlpe insulated pvc tape inner sheated armoured heavy duty , supply of electric earthing set complete with items , supply of fuel filter element primary , supply of fuel filter element secondary , supply of fuel flexible pipe , supply of hose pipe , supply of engine oil for one change , supply of oil filters , supply of fan belt , supply of fuses , supply of screw driver set , supply of d spanners